CA Dynam for VSE User Guide

Data Set Maintenance
Disk
User
Owner
System
Displays the data set disk type.
Displays the user ID associated with the data set. Also a selection field.
Displays the ownership code associated with the data set. Also a selection
field.
Displays the system ID associated with the data set. Also a selection field.
Local Commands
Type any of the following commands on the command line in the upper lefthand
corner of the panel and press Enter to execute these functions:
ADD
Transfer to the Data Set Detail Panel (CAYD-2110) and add a new data set to
the Catalog.
BACkward nnn Scroll backward nnn panels. The default is 1.
BOTtom
Scroll to the bottom of the panel display.
DOwn nnn Scroll down nnn lines. The default is 1.
FORward nnn Scroll forward nnn panels. The default is 1.
TOP
Scroll to the top of the panel display.
UP nnn Scroll up nnn lines. The default is 1.
Short Commands
Enter any of the following commands in the short command area (Cmd) on the
same line as the desired data set to execute these functions:
AUX
DEL
Transfer to the Auxiliary Record Panel (CAYD-2140), which displays the
comments and auxiliary messages defined for the selected data set.
Delete the selected data set from the Catalog.
Important! When maintaining multifile-volume data sets, if you perform the
DELete command on one file, CA Dynam/T applies it to all subsequent files of
the multifile set.
DSP
Transfer to the Data Set Detail Panel (CAYD-2110), which displays in detail all
the attributes of the selected data set. If no other short commands have been
entered, you can display the same information by positioning the cursor
anywhere on the same line of the desired data set and pressing Enter.
7–14 User Guide