CA Dynam for VSE User Guide

Accessing the File Management System
An example of what might appear on your CAICUI main menu follows:
CUI-MENU Primary Selection Panel CAICUI
====>
Enter desired option number or any valid command and press the ENTER key.
1. CUI Session Status Selection
2. CUI Maintenance
3. Event Notification Selection
4. Event Notification Maintenance
5. File Management
1=Help 2= 3=Quit 4= 5= 6=
7=Backward 8=Forward 9= 10= 11= 12=Exit
Local Commands
To select the File Management option from this panel, enter its menu number
(in this case, 5) and press Enter, or tab down and press Enter. After you
become more familiar with the CUI transaction, you can optionally use CAICUI
global or special commands to immediately transfer to the panels of your
choice. For example, enter DYNAM MENU on the command line to
immediately transfer to the File Management Panel (CAYD-0000), or enter
DYNAM QUERY STATUS to immediately transfer to the System Status
Information Panel (CAYD-1400). You can also use fastpath command
processing (For more information, see the CA CIS Administration Guide.)
The following commands are available with the CAICUI Primary Selection Panel
(CUI-MENU). Type any of the following commands on the command line and
press Enter to execute these functions:
BACkward nnn Scroll backward nnn panels. The default is 1.
BOTtom
Scroll to the bottom of the panel display.
DOwn nnn Scroll down nnn lines. The default is 1.
FORward nnn Scroll forward nnn panels. The default is 1.
TOP
Scroll to the top of the panel display.
UP nnn Scroll up nnn lines. The default is 1.
7–8 User Guide