CA Dynam for VSE User Guide

Vault Location Control Program—TDYNVLT
TDYNVLT Commands
Description
Generates inventory reports for all or selected vault
locations.
Creates a file which contains a list of all the tapes in the
Catalog. This file can be downloaded to a CA WORKSTATION
basic system.
Activates location movement.
Creates a file with a ddname of CAIEXTR, which contains a
list of all the tapes in the Catalog.
Checks all volumes to make sure that the slot numbers are
correct and generates new slots for a vault location (if the
location's slots are changed).
Use Command
INVENTORY
INVENTORY
EXTRACT
MOVEMENT
MOVEMENT
EXTRACT
VERIFY
INVENTORY Command
Format:
INVentory [ SEQ= {VLTVOL|SLOT|DSN } ]
[ INCLVLT=(x,x,.....x,x)|EXCLVLT=(x,x,.....x,x) ]
[ MDSN=NO|YES ]
OR
INVentory EXTRACT
All INVENTORY parameters are optional.
SEQ=
Specifies the sorting sequence to be used for the report.
VLTVOL
SLOT
DSN
Vault location and volume serial number sequence
Vault location and slot number sequence
Data set name sequence
The default is VLTVOL.
The INCLVLT AND EXCLVLT operands are mutually exclusive.
Chapter 3: Supporting Tape File Management 3–49