CA Dynam for VSE User Guide

Reporting on Tape Files
The following table describes the keywords associated with TDYNCLEN
parameter statements.
Parameter Description Required?
OPENS=nnn
ERRORS=
STATUS=
Includes a tape in the report if the total number
of OPENs is greater than or equal to this
operand.
a 1- to 3-digit number.
Includes a tape in the report if the total number
of errors is greater than or equal to this
operand.
a 1- to 3-digit number
THR—causes a tape to be included if the total
number of errors is greater than or equal to the
error threshold.
Determines which tapes to scan.
SCRATCH—scans all tapes in SCRATCH status.
ALL—scans all CA Dynam/T tapes.
The default is SCRATCH.
Yes
Yes
No
Examples:
OPENS=185 ERRORS=00 STATUS=SCRATCH
ERRORS=3 OPENS=7
OPENS=35 STATUS=ALL ERRORS=7
STATUS=ALL ERRORS=THR OPENS=5
If you omit the control statement, the following defaults are used.
OPENS=0 ERRORS=0 STATUS=ALL
A report is produced containing the following information:
• Volser
• Number of OPENS for input, output, and total
• Number of ERRORS for input, output, and total
• Volume threshold—if a tape was initialized using the INT(R) function of
DYNCAT with the CLEAN keyword, the value of the error threshold is
printed
• Date first and last initialized
3–30 User Guide