CA Dynam for VSE User Guide

Tape File Management Utilities
SYSTEM NODEIDS DO NOT MATCH
Indicates that the NODEIDs (under the column SYSTEM) do not reflect the
same information about the owning system. The conflict is resolved
automatically by selecting the volume with the most recent creation date and
time. If both volumes have the same date and time, the owning system is
assumed to have the correct NODEID and will be used to update the other
system.
SYSn EXTRACT HAS BAD STATUS/OWNER
Indicates that the volume or owner information for the volume in question
does not contain appropriate values. This may indicate a problem in the
extract utility. If attempting to resolve this error, contact a CA Technical
Support representative for the system indicated in the message.
VOLSER NOT ON SYSn EXTRACT
Indicates that the volume is active on one system and either not defined or
out-of-service (DELETE status) on the other system. The system that does not
have the volume defined is notified of the status of the volume on the owning
system.
VOLUME STATUS DOES NOT MATCH
Indicates that the volumes are not in the same status on both systems. The
conflict is resolved automatically by selecting the volume with the most recent
creation date and time. If both volumes have the same date and time, the
owning system is assumed to have the correct status, and will be used to
update the other system.
If processing cannot be performed, the following messages appear:
END-OF-FILE ON SYSTEMn EXTRACT, EXPECTED SYSTEM IDENTIFICATION
RECORD
The extract for the system specified does not contain any data. Verify that the
data set is specified correctly and that it was created by the appropriate
extract utility.
END-OF-FILE ON SYSTEMn EXTRACT, EXPECTED VOLUME INFORMATION
RECORDS
The extract of the system specified does not contain any volume information.
Verify that the data set is specified correctly and that it was created by the
appropriate extract utility. If attempting to resolve this error, contact a CA
Technical Support representative for the system indicated in the message.
3–26 User Guide