GSM 11.14 - Version 5.2.0 - Digital cellular ... - Ttfn.net

More documents

Recommendations

Info

Page 34 GSM 11.14 version 5.2.0: December 1996 7.2 Cell Broadcast data download 7.2.1 Procedure If the service "data download via SMS-CB" is allocated and activated in the SIM Service Table (see GSM 11.11 [14]), then the ME shall follow the procedure below: - When the ME receives a new Cell Broadcast message, the ME shall compare the message identifier of the Cell Broadcast message with the message identifiers contained in EF CBMID . - If the message identifier is found in EF CBMID , the cell broadcast page is passed transparently to the SIM using the ENVELOPE (CELL BROADCAST DOWNLOAD) command, as defined below. The ME shall not display the message. - If the message identifier of the incoming cell broadcast message is not found in EF CBMID , then the ME shall determine if the message should be displayed, by following the procedures in GSM 03.41 [7] and GSM 11.11 [14]. The ME shall identify new cell broadcast pages by their message identifier, serial number and page values. 7.2.2 Structure of ENVELOPE (CELL BROADCAST DOWNLOAD) Direction: ME to SIM The command header is specified in GSM 11.11 [14]. Command parameters/data: Description Section M/O Min Length Cell Broadcast Download tag 12.1 M Y 1 Length (A+B) - M Y 1 or 2 Device identities 11.7 M Y A Cell Broadcast page 11.5 M Y B - Device identities: the ME shall set the device identities to: Source: Network Destination: SIM Response parameters/data: None for this type of ENVELOPE command. 8 Menu Selection A set of possible menu options can be supplied by the SIM using the proactive command SET UP MENU. If the SIM has sent this command, and the user subsequently chooses an option, the ME informs the SIM using this procedure. 8.1 Procedure If the service "menu selection" is allocated and activated in the SIM Service Table (see TS GSM 11.11 [14]), then the ME shall follow the procedure below. - When the ME receives a menu selection from one of the menu items defined by a "SET-UP MENU" command issued previously by the SIM it shall pass the identifier of the selected menu item to the SIM using the ENVELOPE( MENU SELECTION) command, as defined below.
8.2 Structure Direction: ME to SIM The command header is specified in TS GSM 11.11 [14]. Command parameters/data: Page 35 GSM 11.14 version 5.2.0: December 1996 Description Section M/O Min Length Menu Selection tag 12.1 M Y 1 Length (A+B) - M Y 1 or 2 Device identities 11.7 M Y A Item identifier 11.10 M Y B - Device identities: the ME shall set the device identities to: Source: Keypad Destination: SIM 9 Call Control by SIM 9.1 Procedure for mobile originated calls If the service "call control" is allocated and activated in the SIM Service Table (see GSM 11.11 [14]), then the ME shall follow the procedure below: - For all call set-up attempts, the ME shall first pass the dialled digits and associated parameters to the SIM, using the ENVELOPE (CALL CONTROL) command defined below. The only exception is for redial attempts which are managed by the ME and only require the call set-up details to be passed to the SIM for the first attempt. - The SIM shall respond with SW1 / SW2 = "90 00" or "9F XX". - If the SIM responds with "90 00", the ME shall set up the call with the dialled digits and other parameters as sent to the SIM. - If the SIM responds with "9F XX", the ME shall use the GET RESPONSE command to get the response data. The response data from the SIM shall indicate to the ME whether to set up the call as proposed, not set up the call, or instead set up a call using the data supplied by the SIM. It is mandatory for the ME to perform the call set-up request in accordance with the data from the SIM. Optionally, the ME may indicate to the user that the call has been barred or changed. The ME shall then follow the call set-up procedure defined in GSM 04.08 [8]. 9.2 Procedure for Supplementary Services If the service "call control" is allocated and activated in the SIM Service Table (see GSM 11.11 [14]), then for all supplementary service operations, the ME shall first pass the supplementary service control string (corresponding to the supplementary service operation and coded as defined in GSM 02.30 [4], even if this SS operation has been performed via a specific menu of the ME) to the SIM, using the ENVELOPE (CALL CONTROL) command defined below. The SIM shall respond in the same way as for dialled digits. The ME shall interpret the response as follows: - If the SIM responds with "90 00", the ME shall send the supplementary service operation with the information as sent to the SIM.
Page 1 and 2: GSM GSM 11.14 TECHNICAL December 19
Page 3 and 4: Contents Page 3 GSM 11.14 version 5
Page 5 and 6: Page 5 GSM 11.14 version 5.2.0: Dec
Page 7 and 8: Foreword Page 7 GSM 11.14 version 5
Page 9 and 10: 1 Scope Page 9 GSM 11.14 version 5.
Page 11 and 12: Page 11 GSM 11.14 version 5.2.0: De
Page 13 and 14: 4.6 Security Page 13 GSM 11.14 vers
Page 25 and 26: 6.6.1 DISPLAY TEXT Page 25 GSM 11.1
Page 27 and 28: 6.6.8 SELECT ITEM Page 27 GSM 11.14
Page 29 and 30: 6.7 Command results Page 29 GSM 11.
Page 33: 7 Data download to SIM 7.1 SMS-PP d
Page 37 and 38: 9.5 Structure of ENVELOPE (CALL CON
Page 39 and 40: See GSM 11.11 [14] for the coding o
Page 43 and 44: 11.9 Item Page 43 GSM 11.14 version
Page 45 and 46: 11.12.3 Additional information for

GSM 11.14 - Version 5.2.0 - Digital cellular ... - Ttfn.net

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?