ABB i-bus® EIB Universal Interfaces US/U 4.2 US/U ... - WindowMaster

ABB i-bus ® EIB
4.12 Function: “Push button
with multiple operation”
Universal Interfaces
US/U 2.2, GH Q631 0074 R0111
US/U 4.2, GH Q631 0070 R0111
The following section describes all the parameters and objects which are
visible if the input is operated with the function “Push button with multiple
operation”.
If the input is operated several times within a certain period, a specified
object value can be modified depending on the number of operations.
This enables e.g. different lightscenes to be implemented with multiple push
button actions.
4.12.1 Parameters
Parameter: “Connected contact type”
This parameter defines whether the contact at the input is a normally open
contact or a normally closed contact.
Parameter: “Max. number of operations”
This parameter specifies the maximum permitted number of operations.
This number is identical to the number of communication objects “Telegr.
operation x-fold”. If the actual number of operations is higher than the maximum
value set here, the input reacts as if the number of operations were
identical to the maximum value set here.
Parameter: “Transmitted value”
It can be set here which object value should be sent. The settings “ON”,
“OFF” and “TOGGLE” are possible. The current object value is inverted
in the “TOGGLE” setting.
35