ABB i-bus® EIB Universal Interfaces US/U 4.2 US/U ... - WindowMaster

ABB i-bus ® EIB
4.7 Function: “Value /
forced operation”
Universal Interfaces
US/U 2.2, GH Q631 0074 R0111
US/U 4.2, GH Q631 0070 R0111
This section describes all the parameters and objects which are visible if the
input is operated with the function “Value / forced operation”.
The function enables the sending of values for any data types.
4.7.1 Parameters
Parameter window when there is a distinction between a short and long
operation:
Parameter window when there is no distinction between a short and long
operation:
Parameter: “Connected contact type”
This parameter defines whether the contact at the input is a normally open
contact or a normally closed contact.
Parameter: “Distinction between long and short operation”
This parameter sets whether the input distinguishes between a short and
long operation. If “yes” is selected, there is a waiting period after the opening/closing
of the contact to determine whether the operation is long or
short. The input then reacts accordingly.
Parameter: “Reaction on operation”
This parameter is visible if there is no distinction between a short and a long
operation. It defines the data type that is sent when the contact is pressed.
20