Synel Access Control

Hardware Specifications
Controllers
SY-400/A
The access controller for controlling up
to two doors
The SY-400/A is an access controller for control of up to two
doors, gates or other barriers. The SY-400/A is a part of a
complete access control solution. All programming and monitoring
functions must be done via PC with Falcon software.
Technical Specifications
n
A direct connection of 2 readers: PRX-3A, PRX-30, SY-10, SY-1
and other existing readers
n
Verification by fingerprint - PRintX (online)
n
3 operation methods: card only, card & PIN, card & fingerprint
n
Up to 30,000 permitted cards
n
Up to 20,000 transactions
n
Two doors control normally closed/normally open relays
n
Door control sensor
n
Time zone by type of day (working day, holiday, etc.)
n
Calendar support
n
Two methods of validity checks: local - independent of
communication, on-line - by SY-Server
n
Communication - RS-232/485, modem, TCP/IP
Access III & IV
A intelligent local access controllers
Incorporating all required I/Os, the Access III & IV are local
controller designated for a single or dual entrance. Operating
on-line with Master and monitored by Falcon software, they
provide an overall solution for monitoring access. The Access
III can also operate on a stand-alone basis.
Include 5 inputs - Access III: Open door, distress/bell, door
sensor and 2 sensor; Access IV: Open door 1, distress/bell,
door 1 sensor, open door 2, door 1 sensor
Include 4 relays - Access III: Door, distress/bell, alarm, alarm
bypass; Access IV: Door 1, distress/bell, door 2, alarm.
Primary and secondary reader
LED indicators
Proximity, Wiegand, magnetic and barcode readers
Support both RS-232 and RS-485
Intended for installation in concealed locations
Technical Specifications
n
Two connectors for badge readers such as PRX-30,
PRX-3, SY-1, SY-10 Series reader unit and barcode
n
Each reader, in addition to reading lines connection, is
supported by three control lines. Control line serves for
LED and buzzer connection, designated for user indication
n
8Kb I 2 C EEPROM for user memory
n
Communication at limited mode terminal is 19200bps
or at stand alone mode 9600bps
n
Up to 4,000 permitted cards (in the stand-alone),
or according to Master used in the online mode
Master Control Unit
This unit is used to interconnect up to 16 access terminals
for purposes of door supervision, door status, data collection/
transfer and reconfiguration services. Several such units may
be connected to a single PC. This unit may be concealed for
additional data securing purposes.
Stand-alone mode with battery backup
Stores Falcon parameters such as: time-zones;
anti-passback; terminal groups; permitted lists, etc.
Supports both RS-485 and TCP/IP (optional)
communication protocols
Four inputs / four outputs relay logic for events control
Three memory configurations
Stand-alone Solutions
PRX-40 Stand-alone
Combining proximity reader with a keypad
as a stand-alone terminal
A compact, easy-to-use and install unit, the PRX-40 guarantees
secure access to a sensitive location. This elegant device
can be installed just about anywhere, as a stand-alone,
contactless terminal.
Technical Specifications
n
n
n
n
n
n
8 kB E 2 PROM memory for 250 card holders & 4-digit PIN
Maximum Range: 8 cm (4 inches)
Operating Frequency: 125 kHz
Internal relay for door-latch activation
RS-232 or RS-485 (ASCII); 9600 b/s
Man-machine Interface
- Indicators for power, card
presence/rejection and keyboard entry
- 10-digit keyboard
- Bell button
- RF coupling of proximity card
SY-11
Combined magnetic or barcode reader with
keypad and as a stand-alone terminal
A compact, easy-to-use and install unit, the SY-11 guarantees secure
access to a sensitive location. This elegant device can be installed
just about anywhere, as a stand-alone, Magnetic or Barcode terminal.
Allows access up to 250 users.
Man-machine interface:
n
LED indicators for power ON
n
Keypad
n
Bi-color control LED
n
Bell button
n
Internal buzzer
n
Output signal: negative logic10mA max.
n
Power supply: 5Vdc or 12 Vdc @ 120mA
n
Magnetic or Barcode reader
PRX-FPU (PRX40&PRintX)
Combine proximity with a keypad
A compact, easy-to-use and install unit, the PRX-40 guarantees
secure access to a sensitive location. This elegant device
can be installed just about anywhere, as a stand-alone,
contactless biometric terminal.
n
n
n
n
n
Readers
PRX-30 Proximity Reader
Combining proximity with a keypad reader
The PRX-30 was developed as a perfect, easy-to-use proximity
device, to be installed at locations where Time & Attendance or
Access terminals require a secure primary or secondary reader.
n
n
n
Combined proximity and
fingerprint reader
Various security settings,
according to security level
required
Up to 4,000 card holders
Full keypad
PRX-4
Your doorway to proximity access control
The innovative stand-alone, easy-to-install access control
proximity terminal
Allows access for up to 400 cardholders
Internal relay for door latch activation
Setup and control either directly on the terminal itself
8 cm reading distance
Technical Specifications
Man-Machine Interface: LED indicators
for card acceptance
Operating frequency: 125 kHz
Interface: RS-232 (ASCII); 9600 bps;
Output relay rating: 24 V@ 3A
Power Supply: 9 Vac / 12 Vdc
Technical Specifications
Maximum Range: 8 cm (4 inches)
Operating Frequency: 125 kHz
Data transmission according to:
- Magnetic, track 2
- Barcode 3-of-9
- Wiegand 26 bit
PRintX
Biometric fingerprint reader - personal
recognition for the highest security level
By providing positive personal verification, PRintX is the ideal
access control reader for maximum security requirements.
Up to 4,000 fingerprint templates
Template verification in less than one second
Compact design for locations with limited
access or where space is at a premium
Operates in conjunction with SY-400/A
Less than 0.001% false acceptance or
false rejection
Five security level verifications
Hardware Specifications
SY-10/SY-10xR
Magnetic or barcode reader with numeric keypad
The SY-10 is a magnetic or barcode reader with a keypad.
It can be connected to Synel terminals such as: Access III,
SY-400/A, SY-780 and other. The SY-10 does not decode
the card but transfers the signal to the controller for decoding
in RS-422 transmission format, in a range of up to 300 m.
Man-machine interface:
n
LED indicators for power ON
n
Keypad
n
Bi-color control LED
n
Bell button
n
Internal buzzer
n
Output signal: negative logic10mA max.
n
Power supply: 5Vdc or 12 Vdc @ 120mA
n
Magnetic or Barcode reader
SY-1 Outdoor Reader
The SY-1 Reader Unit provides a
convenient way of adding a second reader
to Synel’s line of Time & Attendance
terminals and controllers.
The SY-1 includes a reader and an
electronic printed circuit board assembly.
PRX-60
Long distance proximity card reader
Reading range of 60 cm, along with an unprecedented
reading speed
Standard output for data/data, clock/data (magnetic
emulation) or RS-232
Aerial and electronics all in the same case
Fully waterproof plastic case in a modern design
n
n
n
n
n
Technical Specifications
Power supply: 12 VDC / 300 mA
Operating frequency: 125 kHz
No. of bits of encoded card data: 64 bits
Dimensions: 310 mm diameter (12 in.)
36.5 mm (1.4 in.) thick
Weight: 2.600 kg
Access I & II
A firm gateway to security
Wherever you need security, employ these sophisticated,
PC-configurable access control systems. Whether you need
monitoring of single rooms and offices, or full site control of
an entire facility, let Access I & II serve as your tireless guards.
The incorporation of the controller and relay in the same
casing allows for easy installation.
n
n
Technical Specifications
8 kB E 2 PROM for data storage and retention
of set-up parameters sufficient for 9000 records
(based on 4-character length)
RS-485 communication
Falcon i
The Falcon i is a stand-alone CCTV server. This cost-effective
system provides full digital Triplex - recording, real-time
viewing and reconstructing. Falcon i brings high performance
remote video surveillance for your security organizational
needs.
Operated by Falcon PRO software, or its own built-in software
for stand-alone operation.
The system may record from 48 hours up to 4 weeks of
continuous, 8 cameras, 12 frame recording.
Falcon & Falcon PRO Software
A comprehensive access control management
software, includes CCTV monitoring,
personalized card printing and synchronized
active maps and visitors
This access control software is a powerful tool, enabling
complete control over both your employees and workplace.
It enables you to limit access to any specified area; to see
- in real time - the exact location of any individual; and to
produce custom reports on location and movement of all
persons for security purposes.
Synel Industries Ltd.
Yokneam Industrial Park, POB 142, Yokneam 20692, Israel
Tel: +972-4-9596760 Fax: +972-4-9590729
e-mail: info@synel.co.il site: www.synel-ind.com
* Specifications subject to change without notice
Integrated T&A Solutions
SY-780
The ultimate biometric data collection terminal
A state-of-the-art terminal combining the latest data collection
and biometric verification technologies. Ideal for applications
where personal identification is essential.
Up to 4,000 finger print templates per terminal
Communications built-in: TCP/IP, RS-232, SR-485,
and optional internal modem
Readers: available with magnetic, barcode and proximity
Template verification in less than one second
Built-in backup battery
Memory up to 512 KB
Easy programming for collection, storage and data
forwarding
Operation online/offline
Large display: Backlit LCD, 2 rows of 16 characters
TimeLOG PRO Software
The advanced attendance managing software
A comprehensive access control and time & attendance
software, enabling easy control and management of
attendance, payroll and individual employee work rules.
This software’s powerful reports generator and overall easeof-use
enables fast implementation.
Unlimited amount of employees
Multi-user access to program
TCP/IP communications
Windows-based 95/98/NT/2000
Compatible with standard payroll programs
Top of the line modules for:
Project costing
Access control
Choice of terminals SY-715/SY-755/SY-777/SY-780/SY400/A
Pictures in this brochure are for illustration purposes
only. The technical data sheet packed with the product
is the only obligatory source of technical information.
Cat. No. 990090 (SAC-111-02) Original 5/01 Update 03/02
All rights reserved to Synel Industries Ltd. 2002
Synel Access Control
A Complete Solution for Monitoring and
Controlling Physical Access
Keypad
From the simple stand-alone reader for a single door, to the most
complex access control system managed by Falcon, Synel provides
a hardware and software data collection comprehensive solution for
all physical access control needs.
Whether you are a small organization, requiring a small scale security
solution, or whether a large organization is what you seek to protect
- you will find Synel’s Falcon-based hardware and software to be a
high-quality, cost-effective solution.
SYNEL INDUSTRIES LTD
Access Control Systems
ACCESS CONTROL
Access Security Solutions

Cameras
Falcon PRO
Software
* Time LOG
Software
SY-11
Stand-alone
Alarm
Falcon i
Master
Converter
* SY-780
Management
Computer
Room
Reception
Main Entrance
Office
Office
Access III
PRX-30
Meeting
Room
PC with
Falcon &
TimeLOG
Software
SY-400/A
PRintX PRX-30
Converter
SY-780
Access IV
Falcon i
Master
Access III
Camera
Camera
PRX-60
Parking Area
Access III
PRX-30
Access III
PRX-60
Access IV
PRX-30 PRX-30
CCTV Control, Monitoring and Digital Recording
Falcon i
The new Falcon i is a stand-alone CCTV server. This cost-effective system provides full digital Triplex - recording, real-time
viewing and reconstructing. Falcon i brings high performance remote video surveillance for your security organizational needs.
Operated by Falcon PRO software, or own built-in software for stand-alone operation.
The system may record from 48 hours up to 4 weeks of continuous, 8 cameras, 12 frame recording.
Assignment of a camera to an access control
reader or event source
Choice of outlook areas
Popup of an employee’s picture from archive vs.
a live picture during swiping a card
Automatic recording of pre and post event and
its attachment for reconstruction purposes
Falcon i Features
n
Stand-alone server box with 8 cameras plus 8
inputs and outputs (upgradeable)
n
Plug-n-Play: just plug in the box to electricity
and connect the cameras and devices
n
Operates with all standard fixed cameras and
most dome cameras (PTZF and presets)
n
Communication media: PSTN, ISDN, TCP/IP,
GSM, Satellite, Wireless, Optics
n
Remote monitoring, controlling, digital recording
of video and audio (pre & post alarm)
n
Standard Windows environment
n
“Click on Map” to open live video windows
n
Features and options such as:
“one-touch” freeze frame, snap pictures,
printing, recording and more
n
High performance video quality
(1:200 compression rates)
n
Ability to dial up to 5 different locations
n
Options of backup modems for crash protection
n
Optional unlimited archiving capabilities
n
Single line-in and line-out audio channel
Door Sensors
1 to 8
Integrated CCTV screen
Cameras 1 to 8
Falcon i
Active map
Falcon PRO Software
SY-400/A
Access Control Software
Archive
Falcon PRO
PRintX
PRX-30
* Illustrated incorporation of a Time & Attendance terminal
with the Access Control system
The SY-780 is not an Access Control terminal.
TimeLOG software operates in parallel to the Falcon on the
same PC, but is not a part of the Access Control system.
PRX-40
Stand-alone
To Parking
PRX-4
Stand-alone
PRX-30 PRX-30
Visible side of wall
Other side of wall
Concealed installation
Data
RS-485
CCTV
TCP/IP
A comprehensive access control management software, includes CCTV monitoring, personalized card printing and synchronized active maps
This access control software is a powerful tool, enabling complete control over both your employees and workplace.
It enables you to limit access to any specified area; to see - in real time - the exact location of any individual; and
to produce custom reports on location and movement of all persons for security purposes.
Reports all transactions online
Operates under standard Windows environment
Multi-user/Multi-tasking
Unlimited access security groups and time zones
Generates complete user-defined reports
Relates pre-stored personal photo to card holder
Combines CCTV management and operation (Falcon i)
Includes basic personalized ID card printing module (optional)
Card and card printing
Indicates events on a graphic map of any secured area