NK Series Routing Switchers - Studio Hamburg

NK Series Routing Switchers 

www.codanbroadcast.com


Table of Contents 

NK Series System Overview 2 

Routers 5 

NK-MD SD/HD Multi-Definition Video Router Level 6 

NK-S SDI Video Router Level 8 

NK-V Analogue Video Router Level 10 

NK-D AES/EBU Digital Audio Router Level (75 Ω) 12 

NK-D AES/EBU Digital Audio Router Level (110 Ω) 14 

NK-A Stereo Analog Audio Router Level 16 

NK-M Machine Control/Data Router Level 18 

Kondor 2 Large Scale Router Levels 19 

Remote Control Panels 21 

NK Series Remote Control Panel Overview 22 

Remote Control Panel Selection Guide 23 

RCP-NKQ Remote Control Panel 24 

RCP-NKM Remote Control Panel 25 

RCP-NK1 Remote Control Panel 26 

Control Interface 27 

NK-IPS Network Bridge 28 

NK-VRC Virtual Routing Core 30 

NK-JBX Geneos RCP Interface 32 

NK-SCP/A ASCII/RS-232 Control Interface 34 

NK-SCP/K2 RS-485 Control Interface 35 

NK-GPI General Purpose Interface 36 

NK-RP1 Redundant Power Supply 37 

Phoenix Control Surface 39 

A Single Point Solution 40 

Locating Devices 41 

Intuitive Configuration 42 

Advanced Control 43 

Advanced Features 44 

Automatic Software Updates 45 

Ordering Information 46 


2

NK Series System Overview 

Key Features 

►► 

Distributed architecture, no single 

point of failure 

►► 

All signal types supported 

►► 

Up to 32 independent routing levels 

►► 

Intuitive extendable GUI—Phoenix 

Control Surface 

►► 

Up to 2 000 data labels using NK-VRC 

►► 

16 x 4/16 x 16 in 1 RU, 64 mm depth 

►► 

32 x 32/34 x 34 in 2 RU, 64 mm depth 

►► 

64 x 64/72 x 72 in 3 RU, 120 mm 

depth 

►► 

Configure using Phoenix or web 

browser using the NK-IPS network 

bridge 

►► 

Low jitter for digital routers 

►► 

Various configuration and control 

options including remote control 

panels, web browsers and Phoenix 


►► 

Expandable to 256 x 256 (SDI and 

HDTV) and 128 x 128 (AES/EBU, 

Analogue Audio and Analogue Video) 

using Kondor 2 router levels 

Family Overview 

Family Overview 

Codan Broadcast’s NK Series of routers offers a low cost, 

low risk transition path from simple routers to sophisticated 

Codan Broadcast’s NK Series of routers offers a low cost, 

routing systems. 

low risk transition path from simple routers to sophisticated 

The routing NK systems. Series is a family of routing products that caters for 

both basic and sophisticated applications. The NK Series 

The NK Series is a family of routing products that caters for 

supports video (SD/HD, SD and analogue), audio (AES/EBU 

both basic and sophisticated applications. The NK Series 

and analogue) and machine control (reciprocal RS-422). 

supports video (SD/HD, SD and analogue), audio (AES/EBU 

Additional and analogue) system and components machine control include (reciprocal the Phoenix RS-422). Control 

Surface, a broad range of fully programmable control panels, 

Additional system components include the Phoenix Control 

Surface, a broad range of fully programmable control panels, 

NK Series Router Levels 

1RU 2RU 3RU 

Levels 16 x 4 16 x 16 32 x 32 34 x 34 64 x 64 72 x 72 

MD (SD and HD) NK-MD164 NK-MD16 NK-MD34 NK-MD72* 

SD SDI NK-S164 NK-S16 NK-S34 NK-S72* 

Analogue Video NK-V164 NK-V16 NK-V32 

AES/EBU (75 Ω / 110 Ω) NK-D164 NK-D16 NK-D32 NK-D64* 

Stereo Analogue Audio NK-A164 NK-A16 NK-A32 NK-A64* 

Data (RS-422 Machine Control) NK-M16 NK-M32 

a virtual routing core, a network bridge, a GPI interface, 

automation interfaces and other protocol converters, plus 

a virtual routing core, a network bridge, a GPI interface, 

rack-mount redundant power supplies. 

automation interfaces and other protocol converters, plus 

Kondor rack-mount 2 router redundant frames power further supplies. expand system size and 

enhance functionality with no change in the control system. 

Kondor 2 router frames further expand system size and 

An enhance NK router functionality system, with whether no change consisting in the control of one system. level or 

many, is simple to configure and operate. 

An NK router system, whether consisting of one level or 

many, is simple to configure and operate. 

*Expandable from 8x8 in groups of 8 

3 Codan Broadcast

Configuration and Operation 

Configuration for all NK devices is via the Phoenix Control 

Surface or a web browser. Each router level may be divided 

into smaller partitions that may be assigned to a unique or 

common switching level. 

Operation is via any NK Series remote control panel, 

the Phoenix Control Surface or NK-VCP virtual control 

panel. Every key of each NK Series remote control panel 

is configurable to enable panels to be customised for the 

project or the operator. 

Phoenix is a simple-to-use, highly visual GUI. With Phoenix, 

the full capabilities of the NK system are available from your 

PC, including configuration of all router levels and remote 

control panels, monitoring and system control. 

The NK-VCP virtual control panel enables users to remotely 

control an entire NK system, making crosspoints as easy as 

a mouse click! 

Kondor 2 Router Levels 

1 x 6 RU Frame 2 x 6 RU Frame 4 x 6 RU Frame 

Levels 48 x 48 64 x 64 96 x 96 128 x 128 64 x 64 96 x 96 128 x 128 144 x 144 128 x 128 160 x 160 192 x 192 256 x 256 

MD (SD and HD) K2-MD144 K2-MD256 

SD SDI K2-S144 K2-S256 

Analogue Video K2-V64 K2-V128 

AES/EBU (75Ω / 110Ω) 

K2-D128 

Mono Analogue Audio 

K2-A128-M 

Stereo Analogue Audio 

K2-A128 


4

Product Range 

►► 

SD/HD Multi-Definition Router Level (NK-MD) 

►► 

SD/SDI Digital Video Router Level (NK-S) 

►► 

Analogue Video Router Level (NK-V) 

►► 

AES/EBU Digital Audio Router Level (NK-D) 

►► 

Stereo Analogue Audio Router Level (NK-A) 

►► 

Machine Control/Data Router Level (NK-M) 

►► 

Kondor 2 Router Levels (K2) 

►► 

Selection of fully programmable Remote 

Control Panels (RCP-NKQ, RCP-NKM and 

RCP-NK1, plus Geneos Control Panels via 

NK-JBX) 

►► 

Network Bridge(NK-IPS) 

►► 

Virtual Routing Core (NK-VRC) 

►► 

Serial Control Port—ASCII/RS-232 Interface 

(NK-SCP/A) 

►► 

Serial Control Port—RS-485 Interface 

(NK-SCP/K2) 

►► 

General Purpose Interface (NK-GPI) 

►► 

Redundant Power Supply (NK-RP1) 

►► 

Phoenix Control Surface (NK-PCS) 

The T-Bus Control System 

The NK-IPS Network Bridge is connected to other NK Series 

devices via the Codan Broadcast T-Bus control system, 

a multi-drop RS-485 control system supporting collision 

detection and half-duplex communication. The T-Bus control 

system minimises cable connections between devices, acting 

as both the communications line and a reliable means to 

phantom power NK Series devices, such as the RCP-NK1, the 

NK-SCP/A and the NK-GPI. 

The T-Bus control system’s collision detection support ensures 

that if two devices transmit messages at the same time they 

will not send incorrect data to other devices on the line. All 

components that utilise the T-Bus Control System are able 

to monitor communication on the line to ensure that no 

two devices are transmitting at the same time, maximising 

reliability and minimising the risk of communication errors. 

Router Flexibility 

The NK Series of routers may be configured with multiple 

partitions, effectively making two or more smaller routers from 

the one frame. Partitioning enables a flexible routing solution 

for applications where multiple switches must be activated 

on the one level. Partitions configured on the analogue 

video level enables users to configure single routers to switch 

independent YUV or RGB signals simultaneously. For the 

analogue and digital audio levels, users can partition routers 

to switch simultaneously when using multiple language 

streams. 

Sources 

32 24 16 8 1 

Sources 

32 24 16 8 1 

1 8 16 24 32 

Destinations 

1 8 16 24 32 

Destinations 

Legend 

Unused Crosspoints 

Sources 

32 24 16 8 1 

Sources 

32 24 16 8 1 

Router Partitioning 

1 8 16 24 32 

Destinations 

1 8 16 24 32 

Destinations 

The example above shows crosspoint assignments 

when a 32 x 32 router is partitioned. The image 

displays a 32 x 32 router with no partitions (top 

left); a 32 x 32 router partitioned as two 16 x 16 

routers (top right); a 32 x 32 router partitioned 

as three 10 x 10 routers (bottom left); and a 

32 x 32 router partitioned as four 8 x 8 routers 

(bottom right). 

5 Codan Broadcast

Routers

NK-MD 

SD/HD Multi-Definition Video Router Level 

Key Features 

►► 

Compact size 

►► 

Data rates 143 Mb/s to 1.485 Gb/s 

►► 

Cable equalising inputs 

►► 

Non-reclocking outputs 

►► 

NK-MD72 modular — expandable 

from 8 x 8 in groups of 8 

►► 

Supports SMPTE standards 259M, 

292M and 344M 

►► 

Excellent performance and 

specifications 

►► 

Low power consumption 

►► 

Fully integrated with other NK Series 

devices 

NK-MD164 



Ordering Information 

NK-MD164 16 x 4 SD/HD Video Router 




NK-MD-FRM 72 x 72 SD/HD Video Router Frame 

NK-IMD SD/HD Input Card (8 channel) 

NK-OMD SD SD/HD Output Card (8 channel) 

NK-ISD SD Input Card (8 channel) 

NK-OSD SD Output Card (8 channel) 


7 Codan Broadcast

Overview 

NK-MD router levels are available in three sizes: 

►► 

1 RU 16 x 4 and 16 x 16 (fixed capacity) 

►► 

2 RU 34 x 34 (fixed capacity) 

►► 

3 RU 72 x 72 (expandable from 8 x 8 in groups of 8) 

The operational capacity of the NK-MD72 router level is determined by the number of 

input and output cards inserted. The NK-MD72 can accept SD only or SD/HD multidefinition 

I/O cards. Adding new I/O cards is a simple operation taking just a few minutes. 

Ask your Codan Broadcast representative for more details. 

The NK-MD router levels are designed from the ground up to handle high-bandwidth, 

broadcast-quality, digital video signals. 

The multi-definition router level of the NK family is capable of handling SD and HD signal 

streams, as well as DVB-ASI and SDTI streams, supporting SMPTE standards 259M, 292M 

and 344M. 

NK-MD router levels may be divided into smaller partitions, which may be assigned to a 

unique or common switching level. 

Technical Specifications 

NK-MD164 NK-MD16 NK-MD34 NK-MD72 

INPUTS 

Connection 

75 Ω BNC 

Total # of Inputs 16 16 34 72 (max.) 

Return Loss 

>17 dB 

Level 

800 mV p–p 

Cable EQ Up to 100 m Belden 8281 

OUTPUTS 

Connection 

75 Ω BNC 

Total # of Outputs 4 16 34 72 (max.) 

Clocking 

Non-reclocking 

Level 

800 mV p–p 

Return Loss 

15 dB 

PERFORMANCE 

Jitter 

NK-S 

SDI Video Router Level 

Key Features 

►► 

Compact size 

►► 

Data rates 143 to 540 Mb/s 

►► 

Cable equalising inputs 

►► 

Non-reclocking outputs 

►► 

NK-S72 modular — expandable from 

8 x 8 in groups of 8 

►► 

Supports SMPTE standard 259M 

►► 



►► 


►► 


devices 

NK-S164 




NK-S164 16 x 4 SDI Video Router 




NK-MD-FRM 72 x 72 SD/HD Video Router Frame 

NK-ISD SD Input Card (8 channel) 

NK-OSD SD Output Card (8 channel) 


9 Codan Broadcast

Overview 

NK-S router levels are available in three sizes: 

►► 


►► 


►► 


The operational capacity of the NK-S72 is determined by the number of input and output 

cards inserted. Adding new I/O cards is a simple operation taking just a few minutes. 

The NK-S72 core can be upgraded to be SD/HD capable. Ask your Codan Broadcast 

representative for more details. 

The NK-S router levels are designed from the ground up to handle high-bandwidth, 

broadcast-quality, digital video signals. 

The SD router level of the NK family is capable of handling SD signal streams, as well as 

DVB-ASI and SDTI streams. 

NK-S router levels may be divided into smaller partitions, which may be assigned to a 



NK-S164 NK-S16 NK-S34 NK-S72 

INPUTS 

Connection 

75 Ω BNC 


Return Loss 

>22 dB 

Level 

800 mV p–p 

Cable EQ Up to 350 m Belden 8281 

OUTPUTS 

Connection 

75 Ω BNC 


Clocking 


Level 

800 mV p–p 

Return Loss 

15 dB 

PERFORMANCE 

Jitter 

NK-V 

Analogue Video Router Level 

Key Features 

►► 

Compact size 

►► 

Excellent frequency response 

characteristics 

►► 

Input return loss 44 dB 

►► 

Output return loss 30 dB 

►► 



►► 


►► 


devices 

NK-V164 



NK-V164 16 x 4 Analogue Video Router 




11 Codan Broadcast

Overview 

NK-V router levels are available in two sizes: 

►► 

1 RU 16 x 4 and 16 x 16 

►► 

2 RU 32 x 32 

The NK-V router levels are designed from the ground up with high-bandwidth and highperformance 

specifications, normally only found in large scale routers, and are capable 

of handling broadcast-quality analogue video signals. 

NK-V router levels may be divided into smaller partitions, which may be assigned to a 


NK Series analogue video routers may be configured to switch individual RGB or YUV 

channels simultaneously when the router is configured into multiple smaller partitions. 

The NK-V16 router may be configured as three 5 x 5 routers, and the NK-V32 may be 

configured as three 10 x 10 routers. For RGB or YUV router sizes larger than 10 x 10, 

multiple NK-V16 or NK-V32 routers may be used to switch RGB or YUV channels in 

specific user applications. Ask your Codan Broadcast representative for more details. 


INPUTS 

Connection 

NK-V164 NK-V16 NK-V32 

75 Ω BNC 

Total # of Inputs 16 16 32 

Nominal Input Level 

Maximum Input Level 

Clamping Method 

Clamping DC Adjustment 

Return Loss 

OUTPUTS 

Connection 

1 V p–p 

2 V p–p 

AC coupled with sync-tip clamping 

Between blanking = 0 V and sync-tip = 0 V 

44 dB 

75 Ω BNC 

Total # of Outputs 4 16 32 

Level 

Coupling 

1 V p–p 

DC coupled 

Return Loss 

30 dB 

PERFORMANCE 

Differential Gain 0.05% 

Differential Phase 0.05° 

Frequency Response 30 MHz, ±0.1 dB 

60 MHz, ±1 dB 

230 MHz, −3 dB 

Noise 

−76 dB peak 

Crosstalk 

−60 dB, 5 MHz 

Transmit Time 

2 ns 

Timing Scatter 

0.5° Fsc 


GENERAL 

Partitioning 

Up to 8 partitions with independent level assignment 

Configuration 

Web browser via NK-IPS 

Phoenix Control Surface via NK-IPS 

Dimensions 1 RU x 64 mm 1 RU x 64 mm 2 RU x 64 mm 

Power Consumption 12 W 12 W 26 W 

Power Supply 

±15 V DC 

Specifications subject to change without prior notice. 

12

NK-D 

AES/EBU Digital Audio Router Level (75 Ω) 

Key Features 

►► 

Compact size 

►► 

Data rates 32 to 192 kHz 

►► 

Available in 75 Ω unbalanced and 

110 Ω balanced versions 

►► 

NK-D64 modular — expandable from 


►► 



►► 


►► 


devices 

NK-D164/75 




NK-D164/75 16 x 4 AES/EBU Digital Audio 

Router (75 Ω) 




Router (75 Ω)) 



NK-D-FRM-75 64 x 64 AES/EBU Compact Router 

Frame 

NK-IDE-75 AES/EBU Input Card (8 channel) 

NK-ODE-75 AES/EBU Output Card (8 channel) 


13 Codan Broadcast

Overview 

NK-D router levels are available in three sizes: 

►► 

1 RU 16 x 4 or 16 x 16 (fixed capacity) 

►► 


►► 


The NK-D AES/EBU router level of the NK family is capable of handling AES/EBU signal 

streams, as well as other compressed digital audio streams that are within the router’s 

clocking rate. 

The operational capacity of the NK-D64 is determined by the number of input and output 


The NK-D router levels are designed from the ground up to handle high-bandwidth, 

broadcast-quality, digital audio signals. 

NK-D router levels may be divided into smaller partitions, which may be assigned to a 



NK-D164/75 NK-D16/75 NK-D32/75 NK-D64/75 

INPUTS 

Connection 

75 Ω unbalanced BNC 


Level 

1 V p–p 

Cable EQ 

Up to 300 m RG59/U 

OUTPUTS 

Connection 

75 Ω unbalanced BNC 


Clocking 


Level 

1 V p–p 

PERFORMANCE 

Jitter 

NK-D 

AES/EBU Digital Audio Router Level (110 Ω) 

Key Features 

►► 

Compact size 

►► 

Data rates 32 to 192 kHz 

►► 

Available in 75 Ω unbalanced and 

110 Ω balanced versions 

►► 

NK-D64 modular — expandable from 


►► 



►► 


►► 

Fully integrated with other NK Series devices 

devices 





NK-D164/110 16 x 4 AES/EBU Audio Router (110 Ω) 




NK-D-FRM-110 64 x 64 AES/EBU Compact Router Frame 

NK-IDE-110 AES/EBU Input Card (8 channel) 

NK-ODE-110 AES/EBU Output Card (8 channel) 


15 Codan Broadcast

Overview 

NK-D router levels are available in three sizes: 

►► 

1 RU 16 x 4 or 16 x 16 (fixed capacity) 

►► 


►► 


The NK-D AES/EBU router level of the NK family is capable of handling AES/EBU signal 

streams, as well as other compressed digital audio streams that are within the router’s 

clocking rate. 

The operational capacity of the NK-D64 is determined by the number of input and output 


The NK-D router levels are designed from the ground up to handle high-bandwidth, 

broadcast-quality, digital audio signals. 

NK-D router levels may be divided into smaller partitions, which may be assigned to a 



NK-D164/110 NK-D16/110 NK-D32/110 NK-D64/110 

INPUTS 

Connection 

110 Ω balanced DB-25 connectors 


Level 

1 – 7 V p–p 

Cable EQ 

Up to 100 m Belden B1800B 

OUTPUTS 

Connection 

110 Ω balanced DB-25 connectors 


Clocking 


Level 

2 – 4 V p–p 

PERFORMANCE 

Jitter 

Data Rates 

GENERAL 

Partitioning 

Configuration 

NK-A 

Stereo Analogue Audio Router Level 

Key Features 

►► 

Compact size 

►► 

Balanced inputs (can be wired as 

unbalanced) 

►► 

Excellent frequency response 

characteristics 

►► 

Common mode rejection ratio 60 dB 

►► 

Output impedance 50 Ω 

►► 

NK-A64 modular — expandable from 

8x8 in groups of 8 

►► 



►► 


►► 


devices 

NK-A164 








NK-A-FRM 

NK-IA 

NK-OA 

16 x 4 Stereo An. Audio Router 




64 x 64 Stereo An. Audio Router Frame 

Stereo An. Audio Input Card (8 channel) 

Stereo An. Audio Output Card 

(8 channel) 


17 Codan Broadcast

Overview 

NK-A router levels are available in three sizes: 

►► 


►► 


►► 


The NK-A router levels are designed from the ground up with high-bandwidth and highperformance 

specifications, normally only found in large scale routers, and are capable 

of handling broadcast-quality, analogue audio signals. 

NK-A router levels may be divided into smaller partitions, which may be assigned to a 


The operational capacity of the NK-A64 is determined by the number of input and output 


The NK-A analogue audio level of NK-A64 routers offers unparalleled configuration 

and audio processing, enabling users to mix left and right audio channels to suit their 

broadcast requirements. Channels may be swapped, phase inverted or converted to mono 

(both channels left, both channels right, both channels average, sum and difference). 


NK-A164 NK-A16 NK-A32 NK-A64 

INPUTS 

Connection 

Balanced active differential DB-25 


Input Z 

24 kΩ 

Nominal Input Level +4 dBu or −10 dBu (selectable via solder links per input) 

Maximum Input Level +24 dBu 

CMRR 

60 dB 

OUTPUTS 

Connection 

Balanced active differential DB-25 


Output Z 

50 Ω 

Nominal Input Level +4 dBu or −10 dBu (selectable via solder links per output) 

Maximum Input Level +24 dBu 

PERFORMANCE 

Frequency Response ±0.1 dB, 20 Hz to 20 kHz 

−3 dB, 100 kHz 

Distortion 0.005% 

Noise 

−90 dB below +4 dBu 

Crosstalk 

Below noise 


GENERAL 

Number of Levels Dual independent matrix layers 

Control Level No Yes 

Partitioning 

Up to 8 partitions per layer with independent level assignment 

Configuration Web browser via NK-IPS 


Dimensions 1 RU x 64 mm 1 RU x 64 mm 2 RU x 64 mm 3 RU x 120 mm 

Power Consumption 19 W 19 W 38 W 75 W 

Power Supply ±15 V DC +15 V 


18

NK-M 

Machine Control/Data Router Level 

Key Features 

►► 

Compact size 

►► 

True reciprocal switching 

►► 

Allows one master to multiple slaves 

►► 

Auto port direction switching 

►► 



►► 


►► 


devices 


NK-M16 


16 Port Machine Control (RS-422) 

Router 

32 Port Machine Control (RS-422) 

Router 



Overview 


NK-M router levels are available in two sizes: 



►► 

1 RU 16 port 

INPUTS 

Connection 

DB-9 female on chassis 

►► 

2 RU 32 port 

Electrical Standard 

RS-422 

The NK-M machine control level of the NK family is designed 

from the ground up to route RS-422 signals for reciprocal 

switches. 

Direction 

PERFORMANCE 

Data Rate 

Auto port direction switching 

Up to 115.2 kBd 

NK-M routers are available as either a 16 port version 

GENERAL 

(NK-M16) or 32 port version (NK-M32), both able to switch 

Configuration 


data rates up to 115.2 kBd. 


Dimensions 1 RU x 64 mm 2 RU x 64 mm 

Power Consumption 9 W 15 W 

Power Supply 

+15 V DC 


19 Codan Broadcast

Kondor 2 

Large Scale Router Levels 

Overview 

Codan Broadcast’s NK Series of routers extend to sizes up to 

256 x 256 through the use of Kondor 2 router levels. 

The Kondor 2 provides a trusted and proven routing 

switcher capability in its own right. Many hundreds of 

Kondor 2 systems have been used worldwide in outside 

broadcast vans, production, post-production and studio 

environments, encompassing the most sophisticated and 

demanding applications. The Kondor 2 is engineered with 

no active components fixed inside the frame. The flexibility 

of the Kondor 2 is the uniquely engineered architecture of 

the 8-channel and 16-channel I/O cards and the innovative 

free-form backplane. 

The Kondor 2 offers users the ability to mix and match video, 

SDI, HDTV (SD/HD multi-definition), audio and AES/EBU 

signals —all in the same high-density rack frame. 

A 5 RU frame houses 25 modules. Multiple frames may be 

joined together for large configurations. Each frame slot can 

house input or output cards, a matrix switching core or a 

power supply, giving maximum flexibility to customers. 

All devices in a Kondor 2 frame (I/O cards, matrix switching 

cores and power supplies) are hot swappable without taking 

the router off-line and without removing any signal cable. 

In addition, users can move from SDI to HDTV eight inputs/ 

outputs at a time—all at nominal cost. 

Key Features 

►► 

Every module hot swappable 

►► 

Fully expandable 

►► 

Mix and match video, SDI, HDTV, audio 

and AES/EBU in the same frame 

►► 

Supports SMPTE standards 259M, 

292M and 344M 

►► 

Performance remains constant with 

size 

►► 

Status LEDs for alarms 

►► 

Very efficient 1000 W power supplies 

►► 

Redundancy options for power supplies 

and matrix switching cores 

►► 

Signal presence indicators for each 

input and output 

►► 

Universal 5 RU frame 

►► 

Short signal path 


20

A 1 RU fan system with front removable fan tray is located on top or bottom depending 

on cooling needs. The fan trays slide out for service and replacement while the system is 

operational. Three high efficiency fans draw air in through the filtered front door, through 

the power supplies, up through the cards, and exhaust via the back and sides. Other 

cooling options are available for systems made up with multiple frames. 

With the Kondor 2 router levels, the NK Series of routers now provides capacity from 

the smallest applications through to the very large; all in a modular fashion. The full 

capabilities of the NK Series systems are available when using Kondor 2 router levels, 

including the Phoenix Control Surface, NK-IPS network bridge, NK-VRC virtual routing 

core and NK-GPI interface. Naturally, all NK Series remote control panels may be used as 

well as Geneos control panels via the NK-JBX interface. 

Phoenix Control 

Surface 

NK-IPS - Network Bridge 

RCP-NKM - Remote Control Panel 

NK-VRC - Virtual Routing Core 


Available on request. 


K2-RFA-15 

Kondor 2 ‘15’ Rack Frame Kit 

K2-RFA-1551 Kondor 2 ‘1551’ Rack Frame Kit 

PSU-55PP 

PSU-55PP 1000 W Power Supply 

PSU-55PN 

PSU-55PN 500 W/500 W +/- Power Supply 

K2-144XH 

144 x 144 SD/HD (Multi-Definition) Matrix Board 

K2-IMD/OMD SD/HD (Multi-Definition) Input (EQ)/Output 8 Ch 

K2-ISE/OSN SDI Input (EQ)/Output 8 ch 

K2-64XV 

64 x 64 Analogue Video Matrix Board 

K2-IV/OV 

Analogue Video Input/Output 8 Ch 

K2-64XD 

64 x 64 AES Matrix Board 

K2-IDE/ODE AES Input/Output 16 ch 

K2-64XA 

64 x 64 x 1 Analogue Audio Matrix Board 

K2-IA/OA 

Analogue Audio Input/Output 16 ch 

NK-K2 

Kondor 2 Interface 


Legend 

T-Bus 

Serial 

Ethernet 

NK-M32 - Router Level 

Kondor 2 - Router Levels 

21 Codan Broadcast

Remote Control Panels

NK Series Remote Control Panel Overview 

The NK Series offers users complete system control with its native selection of remote 

control panels. Simple system control may be achieved with the use of the RCP-NK1 

or RCP-NKM. The NK Series RCP-NKM and RCP-NKQ also offer users more advanced 

functions including multiple-page menus and panel displays. 

In addition to the native NK Series remote control panels, the NK-JBX gives users the ability 

to integrate Geneos control panels into an NK Series system, substantially increasing 

control options for users who own or wish to use Geneos control panels. 

All NK Series remote control panels feature panel link functionality, allowing panels to be 

joined to act as one larger panel. 

T-Bus (RS-485) 

Address 

21 

22 

NK Series Remote Control Panels 

14 


Panel Link Function 

In the diagram above, the RCP-NKQ and RCP-NKM remote control 

panels are operating individually. 

In the diagram below, the RCP-NKQ and RCP-NKM have been linked, 

effectively operating as one 80-key remote control panel. 

The NK-VCP 

In addition to hardware remote control panels, users may also use software control 

panels including the NK-VCP virtual control panel available on the installation CD-ROM 

accompanying the NK-IPS, or the NK Switchboard (see page 43) from the Phoenix Control 

Surface. 

Please refer to the Remote Control Panel Selection Guide on the following page for an 

overview of remote control panel features. 

T-Bus (RS-485) 

Address 

21 

21 

NK Series Remote Control Panels 

14 

Panel Link 

Address 

3 

4 


23 Codan Broadcast

Remote Control Panel Selection Guide 

NK Series Panels 

Rack 

Units 

RCP-NK1 1 

RCP-NKM 1 

RCP-NKQ 1 

Power 

Supply 

Phantom 

(via T-Bus) 

5 V @ 

2A Power 

Supply 

5 V @ 

2A Power 

Supply 

Comms. 

Connector 

Assignable 

Keys 

RJ-45 40 Backlit LED 

RJ-45 40 Backlit LED 

RJ-45 17 

Key Type Functionality Display 

Graphic LCD 

(32x16 pix.) 

Cutbus 

Mode 

XY 

Mode 

Levels I/O Labels 

Virtual 

Routing Macros Panel 

Linking 

Phoenix 

Custom 

Module 

Userprogrammable 

P P 8 255 P P P P 



Backlit LCD 

(16 x 2 char.) P P 32 2000 Up to 

4000 P P P P 

17 LCD 

buttons P P 32 2000 Up to 

4000 P P P P 

Automation 

NK-GPI 

NK-SCP/A 

Box 

Box 

Phantom 

(via T-Bus) 

Phantom 

(via T-Bus) 

DB-37 

16 GPI Ins 

Contact 

Closure 

Return/Latch 16 GPI Outs 8 255 

P P 

DB-9 RS-232 ASCII Protocol 8 255 

P 

Kameleon 

(RCP-K)* 

1 

Internal 

IEC 

DB-9 48 LED 


LED 

(8 x 2 char.) P P 8 255 255 P 

NK-JBX Supported Panels 

RCP-251* 1 

RCP-SN 2 

RCP-SK1 2 

RCP-SK4 2 

Internal 

IEC 

Internal 

IEC 

Internal 

IEC 

Internal 

IEC 

DB-9 

DB-9 

20 

(+ 10 set 

function keys) 

12 

(+ 8 set 

function keys) 

LED 

LED function 

DB-9 84 LED 

DB-9 48 LED 

Dedicated 

function keys 




LED 

(16 x 2 char.) P P 8 255 255 P 

12 keys + 

status info. 

(240 x 64 pix.) 

P P 8 255 255 P P 

4 LED displays 

(8 char.) P P 8 255 255 P 

12 LED 

displays 

(8 char.) 

P P 8 255 255 P 

Virtual Panels 

NK-VCP User-defined GUI 8 255 255 

P 

N/A 

NK 

Switchboard 

(via Phoenix) 

User-defined Phoenix 32 1 000 1 000 

P P 


*Please note that while still supported by the NK-JBX, manufacture of this panel has been discontinued. 

24

RCP-NKQ 

Remote Control Panel 

Key Features 

►► 

17 backlit graphic LCD keys 

►► 

Menu driven and single key 

configurations 

►► 

Fast and simple to change 


►► 

8 backlight colours 

►► 

Individual 5 V, 2 A power supply 

►► 

Compact 1 RU design 

CPU Upgrade for RCP-KQ1 

A simple, user-upgradeable controller board 

(NKQ-CPU) is available for users who already 

own a Geneos Q Panel (RCP-KQ1), providing 

a cost-effective solution for migrating devices 

to an NK Series routing switcher system. Ask 

your Codan Broadcast representative for more 

details. 


RCP-NKQ 

NKQ-CPU 


Controller board for upgrading 

existing Geneos RCP-KQ1 panels 

Overview 

The RCP-NKQ remote control panel offers 17 coloured 

backlit graphic LCD keys with multiple menus, enabling users 

to instantly navigate through the system with few key presses. 

The press of a menu key in the main menu opens a submenu, 

which refreshes the panel keys with new functions and 

labels. 

Assignment of navigation keys enables quick access to menus. 

Custom key labels (up to 10 characters across 2 lines), icons 

and colours can also be defined by the user for instant 

recognition of any key function. The colours and functions 

of the keys are set up using the Phoenix Control Surface, 

then this configuration document is sent to the panel. This 

eliminates unauthorised or accidental reprogramming. 

The RCP-NKQ is ideal for use on Outside Broadcast vans 

or in production houses where configurations change 

regularly. It is equally as useful in studios where the unlimited 

configurations enable fast and simple customised setups of 

each panel. 


PANEL 

Number of Keys 

Display 

CONNECTIONS 

T-Bus 

GENERAL 

Configuration 

17 x graphic LCD keys 

17 x LCD (32 x 16 pix.) 

2 x RJ-45 (female, looping) 


Phoenix Control Surface via 

NK-IPS 

1 RU x 44 mm deep 

External power pack 5 V @ 2 A 

11 W max. inc. plug pack 

Dimensions 

Power Supply 

Power Consumption 


25 Codan Broadcast

RCP-NKM 


Overview 

Each of the 40 keys of the RCP-NKM remote control panel 

can be assigned from a range of switch functions in the 

Phoenix Control Surface. The back-lit 16 x 2 LCD provides 

a large source and destination status display. The fully 

illuminated keys also have removable clear polycarbonate 

caps to enable labelling. Backlighting enables the labels to 

be viewed in low-lit control rooms making the panel perfect 

for almost any application. The panel can be used with any 

size router as XY, cutbus or multi-cutbus. The panel may also 

control multiple router levels, either tied or as breakaways. 

The flexibility of the RCP-NKM means that even after major 

system changes, it can be fully reprogrammed without the 

limitations of fixed function panels. Each panel can be 

assigned to any portion of the router with an individual set of 

labels and panel layout. 


PANEL 


Display 

CONNECTIONS 

T-Bus 

GENERAL 

Configuration 

40 x backlit LED 

16 x 2 character LCD 






External power pack 5 V @ 2 A 

10 W max. inc. plug pack 

Dimensions 

Power Supply 



Key Features 

►► 

40 fully illuminated keys 

►► 

Backlit 16 x 2 LCD display 

►► 

Fast and simple to change 


►► 

Super slim 

►► 

Individual 5 V power supply 

►► 


CPU Upgrade for RCP-KM1 

A simple, user-upgradeable controller board 

(NKM-CPU) is available for users who already 

own RCP-KM1 Geneos control panel, providing 

a cost-effective solution for migrating devices 

to an NK Series routing switcher system. Ask 

your Codan Broadcast representative for more 

details. 


RCP-NKM 

NKM-CPU 


Controller board for upgrading 

existing Geneos RCP-KM1 remote 

control panels 


26

RCP-NK1 


Key Features 

►► 

40 fully illuminated keys 

►► 

Super slim 

►► 

Key panel can be localised to front of 

NK-16 routers 

►► 

Low cost 

►► 

Phantom powered via the T-Bus 

►► 



RCP-NK1 Remote Control Panel 

Overview 

The RCP-NK1 features 40 soft, fully programmable backlit 

keys arranged in a 32 + 8 configuration for convenient 

function key layout. The RCP-NK1 remote control panel can 

be used with any size router as XY, cutbus or multi-cutbus. 

The RCP-NK1 panel may also control multiple router levels, 

either tied or as breakaways. 

Connected via the T-Bus control system, the RCP-NK1 is 

phantom-powered by the router to which it is connected. 

Multiple control panels can be linked together and powered 

from the one router. 

One of the most useful and flexible features of the RCP-NK1 

remote control panel is the ability to install the front key panel 

locally to NK-16 routers. Localising RCP-NK1 remote control 

panels ensures that rack space is maximised and cable 

connections are minimised. Alternatively, installing panels 

remotely means that panels do not necessarily have to be 

installed in the immediate vicinity of the routers, and can be 

connected and installed in other rooms if required. 


PANEL 


CONNECTIONS 

T-Bus 

GENERAL 

Configuration 

40 x backlit LED 





Panel Program Mode 


Phantom Power via T-Bus 

Dimensions 

Power Supply 


27 Codan Broadcast

Control Interface


Network Bridge 

Key Features 

►► 

Interface from any computer on 

a network to configure, upgrade, 

monitor or remotely control NK Series 

devices 

►► 

Increases flexibility of installation and 

fault tolerance of system 

►► 

8 port hub for T-Bus compliant 

devices 

►► 

Compact size (1 RU, 24 mm depth) 

►► 

Internal web server 

►► 

Can be password protected to 

prevent unauthorised changes 

►► 

Front panel indication of 

communications status and activity 

►► 

Network monitoring of connected 

NK Series devices 

►► 

DHCP and TCP/IP compatible 

►► 

Easy to install 


NK-IPS Network Bridge 

Overview 

The NK-IPS network bridge is the external gateway to all 

NK Series devices for configuration, firmware upgrades, 

monitoring and remote control. 

The full capabilities of the Phoenix Control Surface, a web 

browser or the NK-VCP virtual control panel are available 

from any computer when connected locally or through a 

network to the NK-IPS network bridge. 

The 8-port hub on the rear of the NK-IPS enables flexibility 

of installation and isolating groups of devices. In the event 

of a critical error, the 8 port hub and connection of devices 

in a star layout means that individual device failure does not 

affect the entire system. 

Alarm status and monitoring is displayed on the NK-IPS On 

line Devices web page enabling users to locate errors and 

troubleshoot problems. 

Applications 

The NK-IPS network bridge is suited to environments where 

systems and devices must periodically be reconfigured, for 

remote control, or within environments where devices need 

to be locked to prevent changes in configuration. 

When coupled with the Phoenix Control Surface, a web 

browser or the NK-VCP virtual control panel, users have 

unparalleled versatility for device customisation, firmware 

upgrades, alarm display and system operation. At the same 

time, the NK-IPS can limit access through password control. 

The alarm status, visible from the Phoenix Control Surface 

or a web browser, shows warnings, and errors. Users can 

select the device to display information and a brief alarm 

description. 

29 Codan Broadcast

NK-IPS System Diagram 

Phoenix 


Web Browser 

Legend 

T-Bus 

Serial 

Ethernet 

London 

Sydney 


Network/ 

Ethernet Hub 

Internet/LAN/VPN 



RCP-NKQ - Remote Control Panel 

NK-S34 - SDI Video Router 

NK-MD72 - SD/HD Video Router 

NK-JBX - Geneos RCP Interface 


Geneos Control Panels 


30

NK-VRC 

Virtual Routing Core 

Key Features 

►► 

Provides virtual routing for 

an NK Series routing switcher 

system 

►► 

1 000 virtual input mappings and 

1 000 virtual output mappings 

►► 

Four status LEDs for visual 

error checking 

►► 



NK-VRC Virtual Routing Core 

Overview 

The NK-VRC offers a virtual routing solution to any NK routing 

swicther system. The NK-VRC offers up to 2 000 virtual source 

and destination assignments for the routing system, making 

it ideal for environments where resources may be added in 

the future. 

Virtual routing enables grouping of several physical inputs 

and outputs for a switch. The virtual routing capability of the 

NK-VRC allows the creation of virtual I/O assignments for up 

to 1 000 sources and 1 000 destinations. 

Users can configure the NK-VRC so that the NK Series routing 

switcher system knows which physical input socket to use for 

each of the 32 levels and each virtual I/O assignment. 

Physical inputs and outputs may be assigned to more than 

one virtual label, resulting in a virtual routing table (physical 

source/destination and level combinations) larger than the 

actual system size. 


VIRTUAL I/O 

Sources 

Up to 1000 (per NK-VRC) 

Destinations Up to 1000 (per NK-VRC) 

Levels 32 

CONNECTIONS 

T-Bus 


GENERAL 

Configuration 





+15 V DC 

3 W 

Dimensions 

Power Supply 



31 Codan Broadcast

NK-VRC System Diagram 

Phoenix 


Web Browser 

Network / 

Ethernet Hub 

RCP-NK1 - Remote Control Panel 

(Must be enabled for Virtual Routing) 


NK- IPS - Network Bridge 

The NK-VRC receives virtual data from a remote 

control panel 

The NK-VRC then sends the physical data to the router 

Legend 

T-Bus 

Ethernet 

Upon activation, a switch completion message is 

returned to the NK-VRC 

The NK-VRC converts the physical data to virtual data 

and returns it to the panel 

Router Levels 

NK-D16, NK-S34 


32

NK-JBX 

Geneos RCP Interface 

Key Features 

►► 

Enables existing Geneos panels to 

control an NK Series routing switcher 

system 

►► 

Connects up to 252 panels 

►► 

Enables multiple NK-JBX units to be 

connected 

►► 

Compact 1RU design 

Supported Panels 

► 

► 

RCU-251/RCP-251* 

Compact Controller 

► 

► 

RCU-252/RCP-SN 

SpinKnob Controller 

► 

► 

RCU-348/RCP-K* 

Kameleon Controller 

► 

► 

SK-x/RCP-SKx 

SK Series Kameleon Controllers 1–4 

*Please note that while still supported by the NK-JBX, 

manufacture of this panel has been discontinued 


NK-JBX 

Geneos RCP Interface 

Overview 

The NK-JBX is an expansion module giving users the ability 

to integrate Geneos control panels into an NK Series routing 

switcher system. The NK-JBX connects directly to the T-Bus 

and may connect up to 252 panels. Each panel can then be 

easily configured via a web browser or the Phoenix Control 

Surface. The NK-JBX supports bi-directional communication 

with each panel. 

Each NK-JBX can control a subset of 255 inputs, 255 outputs 

and 8 levels from the total of 65 535 inputs, 65 535 outputs 

and 32 levels available within the NK Series routing switcher 

system. 

The NK-JBX substantially increases the control options for 

users of an NK Series routing switcher who own or wish to 

use Geneos control panels. 


CONNECTIONS 

RCP Connections 

RCP Communication 

T-Bus 

GENERAL 

Configuration 

4 x DB-9 (female) 

RS-422 






+15 V DC 

3 W 

Dimensions 

Power Supply 



33 Codan Broadcast

NK-JBX System Diagram 

Legend 

T-Bus 

Serial 

Ethernet 

Phoenix 


Web Browser 

Network / 

Ethernet Hub 

NK-JBX - Geneos RCP Interface 


Geneos Control Panels 

Router Levels 

NK- D16, NK-S34 


34


ASCII/RS-232 Control Interface 

Key Features 

►► 

Allows NK Series routers to be 

controlled from an automation 

system or other device (via the ASCII 

protocol) 

►► 

Easy to install and operate 

►► 

Phantom-powered via the T-Bus 

►► 

Stand-alone module 

Actual Size of NK-SCP/A Size 

Overview 

The NK-SCP/A model enables an RS-232 

device, such as an automation system or 

computer terminal, to control NK Series routers 

using the ASCII protocol. Any combination of 

NK Series routers can be controlled with a 

maximum size of 255 inputs and 255 outputs 

with up to 8 levels. The bi-directional protocol 

includes crosspoint status monitoring and 

crosspoint switching. Crosspoint switching 

can be performed using individual levels or 

through user-defined breakaway mapping. 

NK-SCP/A System Diagram 

Bi-directional communications 



Computer or 

Automation system 


ASCII/RS232 Control Interface 


ASCII/RS-232 Control Interface 

Legend 

T-Bus 

Router Levels 

NK-S16, NK-D32 

Serial 


35 Codan Broadcast

NK-SCP/K2 

RS-485 Control Interface 

Overview 

The NK-SCP/K2 allows Kondor 2 routers to 

be extended by utilising NK Series routers. 

Any combination of NK Series routers can be 

added to a Kondor 2 system with a maximum 

size of 255 inputs and 255 outputs with up to 

8 levels. Kondor 2 inputs, outputs and levels 

are directly mapped to NK Series inputs, 

outputs and levels, meaning that no user 

mapping is required. 

Actual Size of NK-SCP/K2 

Key Features 

►► 

Allows NK routers to operate as a 

Kondor 2/Geneos level 

►► 


►► 

Phantom powered via the T-Bus 

►► 

Stand-alone box 

NK-SCP/K2 System Diagram 

Uni-directional communications 

K2/Geneos RCP 

RCP-SN 

Geneos CPU 

NK-SCP/K2 


Router Levels 

NK-S16, NK-D32 


NK-SCP/K2 RS-485 Control Interface 

PC operating Geneos 

software 

Kondor 2 - Router Levels 

Legend 

T-Bus 

Serial 

Ethernet 


36


General Purpose Interface 

Key Features 

►► 

16 GPI inputs and outputs 

►► 

Return/Latch mode 

►► 


►► 

No DIP switches for configuration 

►► 

Phantom-powered via the T-Bus 

►► 

Stand-alone module 

Overview 

The NK-GPI is a stand-alone, universal 

general purpose interface for the Codan 

Broadcast NK Series family of routers. 

Providing both GPI inputs and outputs, 

the NK-GPI enables flexible GPI control, 

configured from a web browser or the 

Phoenix Control Surface, via the NK-IPS. The 

NK-GPI also supports both GPI input return 

and latch modes. 

NK-GPI System Diagram 

16 GPI Inputs 


16 GPI Outputs 


T-Bus 

RS-485 



General Purpose Interface 


CCUs 1-16 

1 16 

GPI Tallies 


37 Codan Broadcast

NK-RP1 

Redundant Power Supply 

Overview 

The NK-RP1 offers a reliable, fault tolerant and fail-safe option 

for NK Series routers and peripheral devices. The NK-RP1 

supplies redundant power to up to four routers and devices, to 

a total power consumption of 100 watts. The NK-RP1 provides 

GPI outputs to indicate alarms, in the event that one power 

supply has failed. The heartbeat LED on the front of the unit 

also blinks if one PSU has failed. 

During normal operation, the design of the NK-RP1 enables 

balancing of the power load, delivering high reliability to all 

connected routers and devices. When configured as a dualredundant 

positive and negative power supply, the NK-RP1 

has greater than 80% efficiency as a negative power source, 

providing both efficient and low-temperature operation. 

The NK-RP1 comes standard as a positive power rail supply. 

A negative power rail option may be installed as an upgrade 

by simply removing the front panel and inserting the NK-RP1- 

NEG option card (required for NK-A16/32 and NK-V16/32 

router levels). 



PERFORMANCE 

Input 

100 to 240 V @ 1.5 A (47 to 63 Hz) 

Positive Output +15 V @ 6.67 A (100 W) 

Negative Output –15 V @ 3.33 A (Optional) 

Maximum Total Output 100 W 

Relative +/– Output See table below 

GENERAL 

On-board Cooling 

Dimensions 

2 x 40 mm fans 



Relative Positive/Negative Power Output 

POWER DISTRIBUTION (Watts) 

POSITIVE POWER 100 90 80 70 60 50 40 

NEGATIVE POWER 0 8.4 16.8 25.2 33.6 42 50 

Key Features 

►► 

Fault tolerant power supply option 

for NK Series routers 

►► 

Supplies redundant power to up to 

four routers 

►► 

GPI alarms for status output 

►► 

Available in positive rail and 

positive/negative rail models 

►► 

Front access enables easy 

replacement of power supply 

modules and negative option card 

►► 

Inexpensive power source for 

multiple NK Series devices 


NK-RP1/P 

NK-RP1/PN 

NK-RP1-NEG 

NK-D12/PN 

NK-S12/P 

Positive rail only model 

Positive/Negative rail model 

Negative option card (field retrofit 

to NK-RP1/P) 

1.2 m PSU cable for NK Series 

devices with DB-9 power connector 

1.2 m PSU cable for NK Series 

devices with Neutrik ® Speakon ® 

power connector 

38


NK-RP1 System Diagram 

Supported Devices: 

►► 

All NK Series routers 

Power 


Dual Redundant PSU 

Power 

►► 

NK-IPS network bridge 

►► 

NK-VRC virtual routing core 

►► 

NK-JBX Geneos RCP interface 

Device Connectors 


DB-9: 

►► 

All NK-164 router levels 

►► 


►► 


►► 

NK-IPS network bridge 

►► 

NK-VRC virtual routing core 

►► 

NK-JBX Geneos RCP interface 

Neutrik ® Speakon ® : 

►► 



NK-V16 - Analogue Video Router 


NK-D64 - AES/EBU Digital Audio Router 


Legend 

T-Bus 

Distributed Power 

39 Codan Broadcast

Phoenix Control Surface

A Single Point Solution 

Key Features 

►► 

Provides a graphical user 

interface for configuration of 

NK Series devices 

►► 

Save and restore functionality 

IPS Explorer 

Lists all connected devices. 

Document Tabs 

Tabbed view enables multiple devices 

to be viewed and edited quickly. 

Device Configuration 

Graphically displays configuration 

options for all devices on T-Bus. 

Properties Pane 

Enables quick editing of 

device properties. 

►► 

Future-proof design 

►► 

Allows off-line editing of 

devices 

►► 

Secure access via USB 

hardware key 

►► 

Automatic or manual software 

updates from the Codan 

Broadcast website 

►► 

Java-based software 

File Explorer 

Displays saved templates 

and firmware files. 

Online Help 

Direct online help for 

selected configuration field. 

Details Pane 

Shows brief description of 

selected configuration field. 

Main View 

View can be customised to suit 

any requirement. 

Automatic Updates 

Update icon shows when 

new or updated modules are 

available for installation. 

Overview 

Surface. Some devices have a custom module, or plug-in, 

with a more intuitive configuration interface (for example, NK 

The Overview Phoenix Control Surface provides an enhanced graphical Surface. Some devices have a custom module, or plug-in, 

Series remote control panels). Custom modules also enable 

user interface (GUI) solution for locating, configuring and with a more intuitive configuration interface (for example, NK 

The Phoenix Control Surface provides an enhanced graphical users to only install the modules that they require. 

controlling NK Series devices. 

Series remote control panels). Custom modules also enable 

user interface (GUI) solution for locating, configuring and The users Phoenix to only USB install Security the modules Key allows that they secure require. access to device 


Phoenix controlling unlocks NK Series the devices. potential for system growth through 

configuration and control. To restrict program access when 

NK-PCS Phoenix Control Surface 

the off-line editing feature, enabling users to configure new The Phoenix USB Security Key allows secure access to device 

Phoenix unlocks the potential for system growth through users are not at their workstation, the Security Key may be 

devices before they’ve even been installed and connected to configuration and control. To restrict program access when 

the off-line editing feature, enabling users to configure new removed without having to exit the program. 

the system. 

users are not at their workstation, the Security Key may be 

devices before they’ve even been installed and connected to 

removed without having to exit the program. 

Any the system. device that can be configured by the NK-IPS network 

bridge may also be configured by the Phoenix Control 

Any device that can be configured by the NK-IPS network 

bridge may also be configured by the Phoenix Control 

41 Codan Broadcast

Locating Devices 

Network / 

Ethernet Hub 



Surface 



NK-A32 - Stereo Analogue Audio Router 

NK-V32 - Analogue Video Router 

Whether your system is spread over different rooms, different 

cities or even different countries, Phoenix can locate and 

display devices over LAN, VPN or the Internet. 

Upon start-up, Phoenix broadcasts a search command over 

the T-Bus control system via any connected NK-IPS network 

bridges. All compatible and connected devices return their 

status, and Phoenix displays the relevant status information. 

Any alarms are indicated by coloured labels on the device in 

the IPS Explorer window. 

Legend 

T-Bus 

Ethernet 

The IPS Explorer displays all connected devices, and 

also becomes the central point for configuration and 

system management. The IPS Explorer allows users to 

save device configuration, load new firmware and send 

new configurations to devices without opening the device 

configuration. 

Router Alarms 

The IPS Explorer enables users to 

visually monitor the health of their 

routing system. 

There are four degrees of alarm 

urgency: green (normal operation), 

yellow (warning), orange (error) 

and red (critical error). 


42

Intuitive Configuration 

Router Interface 

The default configuration screen for 

NK Series routers provides simple and 

efficient configuration for all NK Series 

router levels. 

The RCP-NKM Custom Module 

The custom module for the RCP-NKM 

remote control panel provides simple 

and intuitive graphical editing of key 

layout and key definitions. 

The RCP-NKQ Custom Module 

The custom module for the RCP-NKQ 

remote control panel provides simple 

and intuitive graphical editing of keys, 

LCD displays and menus. 

Phoenix provides simple, intuitive configuration for all NK Series devices. 

Any new NK Series devices may be configured immediately, without 

having to upgrade the program or install new modules. Some devices 

have their own custom module design, providing user-friendly features. 

Custom modules provide a natural and interactive interface for 

configuration. The custom modules for remote control panels display a 

visual representation of the panel, allowing users to edit buttons easily 

with the mouse. 

When used with the off-line editing feature, custom modules enable 

users to get a feel for devices before they are connected to the system. 

43 Codan Broadcast

Advanced Control 

London 

Sydney 

Network / 

Ethernet Hub 



Surface 

Internet/LAN/VPN 

RCP-NKQ - Remote Control Panel 



NK-MD72 - SD/HD Video Router 


Legend 

T-Bus 

NK-A64 - Analogue Audio Router 

NK-D32 - AES/EBU Audio Router 

Ethernet 

In this distributed NK Series routing switcher system, 

the Phoenix Control Surface in London can control 

or configure equipment located in Sydney. 

The NK Switchboard enables users to locally 

or remotely control an entire NK Series routing 

switcher system. If required, it is also possible 

to control multiple systems, alternating between 

each as needed. Each system may be configured 

by the NK-IPS independently of other systems on 

the network. 

The NK Switchboard also allows users to protect 

outputs as well as providing machine control 

functionality. Each system may be configured 

on-the-fly to display and control almost any 

amount of inputs, outputs and levels. 

Any protected outputs are displayed on the 

NK Switchboard, including protects activated 

from control panels or other Phoenix users. 

The NK Switchboard 

The NK Switchboard provides users with a simple interface 

for crosspoint switching and router status display. 


44

Advanced Features 

The advanced features of the Phoenix Control Surface provide users with unique options for system 

management and control. The USB key provides secure access for engineers and system integrators. 

The save and restore function is especially useful for applications where devices need to be reconfigured 

regularly and quickly. Off-line editing allows users to edit device configurations while the system itself is 

on line or on air. Another significant feature of Phoenix is the ability to send one configuration to multiple 

devices, making it perfect for redundant applications. 

The File Explorer 

The File Explorer provides users with quick and easy access 

to saved device configurations and firmware files. 

Save and Restore 

The Phoenix Control Surface can save any number of system 

configurations to disk, making the NK Series ideal for applications 

such as OB vans where significant and rapid configuration 

changes are required. Configurations may each be saved to a 

separate folder and recalled when required. 

Off-line Editing 

The off-line editing feature of Phoenix makes it the ideal solution 

when planning for growth of an NK Series routing switcher system. 

Default device configurations may be accessed from the Phoenix 

Installation CD and edited before the device has been physically 

installed into the existing system. 

Secure Access 

The Phoenix USB key provides secure access for device configuration and system control. The USB key 

may be removed when users leave their workstation, without having to exit the program itself. This ensures 

that Phoenix can stay on line 24 hours a day if required, and the ability to change system configuration 

can be restricted to selected engineers. 

Upgrading Device Firmware 

The Phoenix USB Key 

Support for New NK Series Devices 

Newly released and future products in the NK Series family can be edited straight away, but many new 

devices will have a custom module for easier configuration. Simply download the custom module for the 

newly purchased hardware module for an immediate start! 

The Phoenix Control Surface allows easy uploading of firmware to devices. New firmware may be 

downloaded from the Codan Broadcast website and displayed in the File Explorer in Phoenix. 

45 Codan Broadcast

Automatic Software Updates 

Phoenix is composed of a series of independent modules, allowing each module to be updated without 

the need to update the program core itself. If a specific device module does require a core update for 

functionality, the dependency is resolved automatically when installing updates from the Update Centre. 

The Update Centre may be used to update the Phoenix Control Surface core modules, library modules, 

existing device modules as well as install new custom modules. 

Updates may also be installed manually if the updates have been downloaded directly from the Codan 

Broadcast website. 

The Automatic Update Check can be enabled to search the Update Centre for module updates, 

enhancements and additions, keeping Phoenix up-to-date when features are implemented. 

System Requirements for Phoenix Control Surface 

CPU 

RAM 

Intel Pentium 600 MHz CPU or equivalent (Recommended: 1 GHz or greater) 

128 MB RAM (Recommended: 256 MB RAM or greater) 

Display 1024 x 768 

Operating System 

Hard Disk Space 

USB 

Other 

Microsoft Windows® XP Professional or Home Edition 

Up to 40 MB of available hard disk space 

1 x USB port for hardware key 

Java Runtime Environment 1.5 (available on Phoenix Installation CD) 

NK-IPS (with firmware 2.0 or greater) 

NK Series routing switcher system operating with either v1.x or v2.x firmware 

The Update Centre 

An example of how the Update Centre displays new or 

upgradeable modules for installation. In this example, 

the NK-VRC editor is a new module that may be installed; 

other modules have upgrades available. 

Package Contents 

1 x Installation CD-ROM 

1 x Hardware Key 

1 x Quick Start Guide 



46



CAT. CODE SIZE ROUTER FORMAT PSU MODEL 

NK-A164 16 x 4 Stereo Analogue Audio Router NK-PN1 



NK-A64 64 x 64 Stereo Analogue Audio Router NK-P3 

NK-D164/75 16 x 4 AES/EBU Digital Audio Router (75 Ω) NK-P1 








NK-M16 16 Port Machine Control (RS-422) Router NK-P1 

NK-M32 32 Port Machine Control (RS-422) Router NK-P1 

NK-MD164 16 x 4 SD/HD Video Router NK-P1 




NK-S164 16 x 4 SDI Video Router NK-P1 




NK-V164 16 x 4 Analogue Video Router NK-PN1 



NK Series Router Levels Power Supplies 

CAT. CODE 

NK-RP1/P 

NK-RP1/PN 

NK-RP1-NEG 

NK-P1 




NK-PN1 

PRODUCT DESCRIPTION 

Redundant Power Supply (Positive rail only model) 

Redundant Power Supply (Positive/Negative rail model) 

Negative option card (for existing NK-RP1 Positive models) 

Stand-alone Positive PSU (50 W) for selected NK-16/NK-32 routers 

Stand-alone Positive PSU (72 W) for selected NK-64 routers 



Stand-alone Positive/Negative PSU (42 W) for selected NK-16/ 

NK-32 routers 

47 Codan Broadcast

Kondor 2 Router Levels 

CAT. CODE PRODUCT DESCRIPTION PSU MODEL 

K2-RFA-15 

K2-RFA-1551 

Kondor 2 Router Levels Power Supplies 

CAT. CODE 

PSU-55PP 

PSU-55PN 



K2-144XH 144 x 144 SD / HD (Multi-Definition) Matrix Board PSU-55PP 

K2-IMD/OMD 

K2-ISE/OSN 

SD/HD (Multi-Definition) Input (EQ)/Output 8 Ch 

SDI Input (EQ)/Output 8 ch 

K2-64XV 64 x 64 Analogue Video Matrix Board PSU-55PN 

K2-IV/OV 

Analogue Video Input/Output 8 Ch 

K2-64XD 64 x 64 AES Matrix Board PSU-55PP 

K2-IDE/ODE 

AES Input/Output 16 ch 

K2-64XA 64 x 64 x 1 Analogue Audio Matrix Board PSU-55PN 

K2-IA/OA 


Analogue Audio Input/Output 16 ch 

Kondor 2 Interface 

PRODUCT DESCRIPTION 

PSU-55PP 1000 W Power Supply for SD, HD and AES 

PSU-55PN 500 W/500 W +/- Power Supply for Video and An. 

Audio 

Remote Control Panels 

CAT. CODE PRODUCT DESCRIPTION 

RCP-NK1 Remote Control Panel 

RCP-NKM Remote Control Panel comes with 5 V PSU 

RCP-NKQ Remote Control Panel comes with 5 V PSU 

Control Interface and Software 

CAT. CODE PRODUCT DESCRIPTION PSU MODEL 

NK-IPS Network Bridge NK-P1 

NK-GPI General Purpose Interface N/A (Phantom) 

NK-JBX Geneos RCP Interface NK-P1 

NK-SCP/A ASCII/RS-232 Control Interface N/A (Phantom) 

NK-SCP/K2 RS-485 Control Interface N/A (Phantom) 

NK-VRC Virtual Routing Core NK-P1 

NK-PCS Phoenix Control Surface N/A 


48

With over 20 years experience, Codan Broadcast delivers you the best 

in leading edge broadcast equipment through innovation, experience 

and unsurpassed service and support. Our wide range of signal 

management products offers extraordinary reliability and value to suit 

TV broadcasters, pre- and post-production houses, and government and 

news facilities. 

We design and manufacture routers and switchers, interface products 

and signal converters and audio monitoring bridges that operate 

seamlessly with your broadcast operations. Our commitments include 

product designs that meet the highest specifications and industry 

standards, backed by a 3 year parts and labour warranty. We provide the 

best available service and support as well as fast, on time deliveries. 

Head Office (Australia): T: +61 (0)8 8336 0600 E: broadcast@codan.com.au 

Europe/Middle East (Germany): T: +49 (0)40 60 95 10 20 

Americas (USA): T: +1 703 361 2721 www.codanbroadcast.com 

Copyright © 2008, Codan Broadcast Products Pty Ltd

NK Series Routing Switchers - Studio Hamburg

Create successful ePaper yourself

Delete template?

Save as template?