LED Lighting - Thorn

LED Lighting 

A comprehensive LED range

Product Thumbnails 

Indoor lighting 

Base LED 9 Cruz LED 11 Axent Downlight LED 12 Axent Track LED 13 

Tidon 15 Prospector LED 17 

Outdoor lighting 

Contrast LED 21 QBA LED 23 Milo R/I 25 ADAN 26 

Cesar LED 27 Mica Slim LED 28 Intensive LED 29 

Adelie 31 

LED Promenade 33 

Street LED 34

3 

Better efficiency and 

a better environment 

LED lighting evokes the spirit of Thorn’s dynamic 

results-orientated PEC programme. 

PEC - Performance, Efficiency and Comfort - is the dynamic, results-orientated 

programme that underpins Thorn’s approach to lighting product and scheme design. 

By acting as an analytical design tool the PEC programme drives designs for efficient 

and sustainable solutions without sacrificing the quality of lighting. 

The programme is based on the principle that Performance, Efficiency and Comfort 

determine the effectiveness of lighting, its impact on the people using it and its impact 

on the natural environment. LED lighting delivers the right light in the right place at the 

right time with high quality solid state light. 

Performance 

The achievement of visual 

effectiveness, meeting 

requirements and targets. 

Efficiency 

Conserving energy and 

effort, reducing CO² 

emissions and waste, 

producing a system that is 

practical and efficient to 

install. 

Comfort 

A subconscious factor 

relating to the ability to give 

people satisfaction and 

stimulation because no two 

products or locations are 

the same, each requires a 

different balance between 

the three components.

LED Lighting 

The character of LED technology is quite unique, enabling it to achieve 

higher levels of performance, efficiency and comfort when combined 

with good luminaire design. 

Benefits of LED 

LED technology offers a number of 

benefits including: 

• Long operating life (up to 50,000hrs) 

• Reduced maintenance 

• High efficiency 

• Low wattage for energy savings 

• High optical performance 

• Precise beam control 

• Dynamic colour change (on request) 

• No UV or IR radiation 

• Eco friendly - no mercury 

• Instant 100% light output 

• 0 - 100% dimming 

• Choice of colours and colour temperatures 

• Compact light source for maximum 

design flexibility 

Why Thorn LED Lighting? 

As a leading international supplier of 

professional indoor and outdoor lighting 

Thorn has years of experience of Luminaire 

development. 

Taking advantage of the Zumtobel group’s 

research and development facilities and 

partnerships, Thorn are uniquely placed to 

combine the latest light source technology with 

their own expertise and facilities for optical and 

luminaire design. 

4

5 

LED Technology and Control 

Progress in LED Technology 

40 years on and the light-emitting diode 

(LED) remains a mystery to its millions 

of users – the majority of whom have 

long taken for granted these small light 

sources that seem to exist in almost every 

electronic device, from clock radios to 

traffic lights. 

How they work 

LED consists of a diode chip (or 

die) made of semiconducting 

material, encased within housing 

and attached to the electrical 

circuit. This housing may be in 

a variety of shapes and sizes 

and helps determine the optical 

characteristics of the LED. 

Generally a second optical control 

element is used in the form of 

a lens mounted on the epoxy 

housing. 

As well as the optical control 

of the system, designing using 

LEDs requires careful thermal 

management. Whilst the ratio 

of light to heat produced by 

LEDs is much higher than for an 

incandescent lamp they do still 

produce a significant amount of 

heat. As LEDs do not emit heat 

as infrared radiation (IR) – the 

light beam is cool - the heat must 

be removed from the device by 

conduction or convection. Without 

adequate heat sinking or active 

cooling, the junction temperature 

of the internal diode will rise, 

shortening lifetimes. 

Finally, LEDs require a regulated 

direct current supply, usually 

supplied by a self-contained 

“driver” which converts the AC 

mains electricity to the correct 

DC voltage. This driver must be 

correctly matched to the LED it 

is powering as incorrect voltage 

and current will at best provide 

poor light and may severely 

reduce the life of the LED or cause 

instantaneous failure of the system. 

The driver can provide a quite 

advanced level of control, allowing 

dimming down to 0%, and with a 

cluster of different coloured diodes 

and the use of technology such 

as DMX protocols linked to a light 

mixing console extremely complex 

lighting effects may be produced. 

Even those sufficiently informed to realise that an LED is 

a solid-state semiconductor device that emits light when 

an electric current passes through it probably only know 

a few of the attributes that contribute to one of most 

remarkable growth patterns the lighting world has ever 

known. Following the development of a new generation of 

materials, particularly over the last decade, and quite apart 

from continued improvements in brightness, life, colour 

quality and the range of shapes and sizes, the efficacy 

of current LEDs for general lighting are now above 100 

Lm/W compared to the limited red indicator of the late 

1960s and its useful life has been extended to around 

50,000 hours. In short, it is now considered a mainstream 

lighting technology. 

A typical LED light engine consists 

of single or multiple LEDs placed 

on a printed circuit board in a 

variety of shapes and sizes. Shown 

is a circular configuration. Photo 

courtesy: Ledon Lighting. 

Today, the most popular type of 

LED for professional lighting is the 

surface mounted device (SMD). 

SMD LEDs are individual surfacesoldered 

standard products, which 

are ready encapsulated. 

Photo courtesy: Cree, Inc.

How do LEDs produce 

white light? 

The light produced by an LED is 

monochromatic and the colour 

of the emitted light depends on 

the material used in making the 

LED and varies from red through 

orange, yellow, green and blue. 

To produce white light two 

methods are used. The best, in 

terms of quality of the spectrum of 

light, is produced using a blue or 

UV LED with a phosphor coating 

(typically yellow). This is termed a 

phosphor down conversion and in 

principal is similar to a fluorescent 

lamp. 

LED packages may also be 

configured to produce mixed or 

blended light, either through the 

use of three or more different 

coloured LEDs (i.e. red, green 

and blue) or through a multicolour 

LED that incorporates two or more 

different colour chips within the 

same epoxy package. 

What is the quality of 

the white light? 

The colour-rendering index (CRI) 

is a measure of the ability of the 

lighting source to reveal the colours 

of an object. Higher numbers are 

better, up to a maximum of 100. 

Current LEDs used for interior 

lighting have CRIs around 90+. 

What is binning? 

An additional consideration is that 

the process for producing LEDs 

cannot accurately reproduce LEDs 

with identical colour appearances, 

especially for white LEDs. To 

overcome this a process called 

binning is used, in which the LEDs 

are sorted into groups of similar 

colour appearance. 

The level of precision required 

depends upon the application. 

Basically, the shorter the throw 

of the light before illuminating a 

surface or where numerous light 

sources are in the field of view, 

the more critical the binning. 

Hence, for an application such as 

wallwashing, it’s essential for all 

the LEDs to match closely to give a 

consistent appearance. However, 

if floodlighting a statue with one 

or two projectors from an adjacent 

building the binning process is less 

important, as individual differences 

would be less obvious. 

What is the lifetime of 

a LED? 

A benefit of LED technology is the 

relatively long life of the systems, 

manufacturers quote upwards of 

50,000 hours life with 70-80% 

lumen maintenance, but other 

factors should be considered. 

Whilst an LED may produce light 

for a long period the amount 

produced will deteriorate over time 

rather than suddenly “burn out”. 

This is mainly due to discoloration 

of the epoxy housing of the LED 

over time. Lumen depreciation 

and LED life varies between 

manufacturers, depending on how 

the LED is integrated, its operating 

temperature and the drive current, 

therefore manufacturers data should 

be consulted. 

How is an LED 

luminaire used? 

Arrays of LEDs have proved ideal 

for signage, guidance and effects 

lighting and their recent use now 

extends from streets and building 

facades to offices. Additionally, 

as the light produced is “cold” 

it has major benefits in museums 

and retail outlets where heat and 

UV may damage displays. LEDs 

continue to build the future of light. 

High quality white light 

Phosphor 

coating 

6

Indoor Lighting

9 

Base LED 

Base LED is a stylish LED 

downlight that offers 

high colour rendering 

CRI (Ra) of 94 and 

is IP44 rated making 

it suitable for a wide 

range of applications, 

from corridor lighting to 

bathroom lighting. 

The product takes 

maximum advantage 

of high performance 

XLamp ® LEDs and 

pioneering colour-mixing 

technology. 

Key features include: 

• Energy efficient and long life – 

at 12W and with an output of 

650 lumens it matches the light 

of a traditional 18W compact 

fluorescent downlight, yet uses 

approximately 50% less energy 

and lasts over four times longer 

• Compared to a 50W Q-PAR 

16 halogen downlight, Base 

LED gives 20% more light for 

around 75% less energy and 

lasts 20 times longer. 

• Available in 2700K and 3500K 

colour temperature options 

• Offers excellent colour rendering 

CRI (Ra) of 94, significantly 

better than most compact 

fluorescent lamps (CFL) 

• Dimmable to 20% using 

conventional devices. 

• Colour consistency over the life 

of the product. 

• A shielding diffuser gives good 

glare control. 

• Base LED is designed to 

maximise heat-transfer. At the 

rear of the cast aluminium body 

is a linear arrangement of heat 

dissipation fins; these eliminate 

the need for a metal heat sink 

inside the luminaire and thus 

reduce the volume 

• Base LED is simple to install. 

Each downlight is supplied with 

two fixing springs to ensure 

correct alignment in the ceiling 

Description 

Ordering Base LED recessed Guide Supplied complete with LEDs 

Weight (kg) SAP Code 

BASELED 165 MRE 1X12W LED L927 (2700K) 1.3 96107294 

BASELED 165 MRE 1X12W LED L935 (3500K) 1.3 96107303 

Base LED surface mounting 

BASELED 165 MCE 1X12W LED L927 (2700K) 2.1 96107308 

BASELED 165 MCE 1X12W LED L935 (3500K) 2.1 96107310 

Attachments 

BASELED 165 WHI BEZEL RING WHI* 0.1 96107296 

BASELED 165 WHI BEZEL RING CU* 0.1 96107297 

BASELED 165 WHI BEZEL RING SSL* 0.1 96107298 

* Standard product comes complete with white bezel. Decorative inner ring may be used for enhanced appearance - select and order separately. 

WHI - matt white decorative inner ring, CU - matt copper decorative inner ring, SSL - satin silver decorative inner ring

11 

Cruz 160 LED 

Engineered to match 

expectations with reality. 

Cruz LED delivers a 

number of key features 

including an output of 

2000 lm, Dali dimming, 

the ability to achieve 

IP54 rating with a 

specific attachment and 

a unique active cooling 

system. 

The whole spectrum of 

interior applications, 

prestigious business 

facilities, offices, schools, 

banks, supermarkets 

and hospitals are now 

accessible to a viable 

alternative to the compact 

fluorescent downlight. 


• A wide range: available in 

3000K and 4000K colour 

appearance producing 2000 

lumens with 94% efficient light 

output, operating at 37W and 

34W with an efficacy of 51 

lm/W and 55 lm/W 

• Offers excellent colour rendering 

CRI (Ra) of 80 

• Light consistency: The white 

light source is generated by the 

light engine of multiple royal 

blue LEDs with a remote yellow 

phosphor lens housed at the top 

of the mixing chamber producing 

a stable and consistent colour 

performance 

• An equivalent substitute 

for common 2x26W CFL 

downlights 

• Cruz 160 LED utilises an active 

cooling technology to dissipate 

the heat generated by the 

high lumen output LED module. 

The unique patented vibrating 

membrane circulates air, and 

provides quiet operation 

• The luminaire is DALI dimmable 

with instant 100% light over a 

rated lifetime of 50,000 hours 

with 70% lumen maintenance 

• Easy to install. Cruz LED utilises 

Thorn’s patented ‘sec-lock’ 

system (refer to images) 

Ordering Guide Supplied complete with LEDs 

Description Weight (kg) SAP Code 

Cruz 160 LED body 

Cruz 160 LED 34W L840 HFX FP 1.8 96062480 

Cruz 160 LED 37W L830 HFX FP 1.8 96062481 

Attachments 


CRUZ 160 BEZEL WHI 0.1 96106926 

CRUZ 160 BEZEL CHR 0.1 96106927 

CRUZ 160 BEZEL GRY 0.1 96107041 

CRUZ 160 GLASS RING FR 0.7 96106928 

CRUZ 160 GLASS IP54 CL WHI 0.2 96107363 

CRUZ 160 GLASS IP54 CL CHR 0.2 96107364 

CRUZ 160 GLASS IP54 CL GRY 0.2 96107365 

CRUZ 160 ANTI HARM IP54 WHI 0.2 96106996 

CRUZ 160G WEIGHT DISTRIBUTION RING 0.1 96106986 

WHI - White, GRY - Grey, CHR - Chrome, FR - Frosted, CL - Clear, FP - Flex & Plug

Axent Downlight LED 

Axent Downlight LED is 

available in both square 

and round version; 

offering a stylish solution 

for a wide range of 

commercial application. 

The innovative design 

of Axent Downlight LED 

offers extremely long 

life, maintenance free 

reliability and significant 

energy saving. 


• Available in 2900K warmwhite 

or 5000K coolwhite 

• Offers an output of 1490lm 

(2900k) - 1597lm (5000k) 

and circuit Watt of 57lm/cW 

(2900k) – 61lm/cW (5000k) 

• Axent Downlight offers colour 

rendering index of over 80 CRI 

• The multichip technology 

incorporated in Axent Downlight 

(multiple LED’s in one package) 

provides increased light output 

in a smaller space and a wider 

spread of light 

• Over 70% of their initial light 

output is maintained after 

50,000 hours compared to 

typically 10,000 hours practical 

life offered by fluorescent 

sources 

• Shallow profile allows 

installation in ceiling voids as 

low as 110mm 

• Axent Downlight uses 

advanced heat pipe cooling 

technology. Heat pipes work 

on the principle that as a liquid 

evaporates, energy - in the form 

of heat - must be taken from 

the environment. Therefore, an 

evaporating liquid will cool the 

surrounding area 

• Prewired remote gearbox 

provides ease of positioning in 

restricted voids 

• Gearbox and luminaire fit 

through ceiling cut out 

• Luminaire is securely retained by 

2 tooless ratchet spring clips 

• Reflector simply clips in to place 



Axent Downlight LED round 

AXENT DL RND 25W LED WH 5000 F/P 1.6 96063599 

AXENT DL RND 25W LED WH 2900 F/P 1.6 96063600 

AXENT DL RND 25W LED SI 5000 F/P 1.6 96063601 

AXENT DL RND 25W LED SI 2900 F/P 1.6 96063602 

AXENT DL RND 25W LED CH 5000 F/P 1.6 96063603 

AXENT DL RND 25W LED CH 2900 F/P 1.6 96063604 

AXENT DL RND 25W LED TL 5000 F/P 1.6 96063605 

AXENT DL RND 25W LED TL 2900 F/P 1.6 96063606 

Axent Downlight LED square 

AXENT DL SQR 25W LED WH 5000 F/P 1.6 96063607 

AXENT DL SQR 25W LED WH 2900 F/P 1.6 96063608 

AXENT DL SQR 25W LED SI 5000 F/P 1.6 96063609 

AXENT DL SQR 25W LED SI 2900 F/P 1.6 96063610 

AXENT DL SQR 25W LED CH 5000 F/P 1.6 96063611 

AXENT DL SQR 25W LED CH 2900 F/P 1.6 96063612 

AXENT DL SQR 25W LED TL 5000 F/P 1.6 96063613 

AXENT DL SQR 25W LED TL 2900 F/P 1.6 96063614 

WH - White, SL - Silver, CH - Chrome, TL - Trimless, RND - Round, SQR - Square, F/P - Flex & Plug 

12

13 

Axent Track LED 

Axent Track LED 

incorporates the very 

latest in LED technology, 

multichip LED’s, which 

provides a new 

alternative to traditional 

sources in retail and 

display applications. 

Multichip technology 

incorporates multiple 

LED’s in one package 

providing increased light 

output in a smaller space 

and a wider spread of 

light. 


• 1 x 17W option offers an 

output of 627lm and 2 x 17W 

options offers an output of 

1254lm 

• Available in 2900K warmwhite 

or 5000K coolwhite 

• Axent Track LED offers colour 

rendering index of over 80 CRI 

(Ra) 

• Axent Track offers 360° rotation 

180° pivot 

• Axent Track comes in 16°, 24° 

or 36° beam angles 

• Combined rotation and pivot 

lock secures the required 

position 

• Removable optic cartridge 

houses filter accessories – no 

tools required 

• Available in silver and white 



Axent Track LED 1xLED WHITE 

AXENT TK 1X17W LED WH 5000 16DEG 5.0 96063354 






Axent Track LED 1xLED SILVER 

AXENT TK 1X17W LED SI 5000 16DEG 5.0 96063360 






Axent Track LED 1xLED BLACK 

AXENT TK 1X17W LED BL 5000 16DEG 5.0 96063366 





AXENT TK 1X17W LED BL 2900 36DEG 5.0 96063371


Axent Track LED 2xLED WHITE 







Axent Track LED 2xLED SILVER 







Axent Track LED 2xLED BLACK 







Attachments 

Description SAP Code 

AXENT TK FILTER RED 96063390 

AXENT TK FILTER BLUE 96063391 

AXENT TK FILTER GREEN 96063392 

AXENT TK FILTER YELLOW 96063393 

AXENT TK HONEYCOMB 45DEG 96063394 

AXENT TK HONEYCOMB 60DEG 96063395 

WH - White, SL - Silver, BL Black 

14

15 

Tidon LED - Available July 2010 

Tidon offers the flexibility 

to provide accent and 

general lighting from one 

luminaire. 


• With eight 2.4W Cree LEDs the 

gimbal is a real contender as a 

100W tungsten halogen lamp 

replacement.. It delivers a similar 

lumen package for 20% of the 

energy consumption 

• Available in superior white 

3000K and 4000K options 

• It has a maintenance free rated 

life of 50,000 hours and is 

dimmable 

• Offers outstanding colour 

stability and uniformity 

• The reflector optics have been 

designed to ensure that a higher 

proportion of the light output is 

directed to the objects surface, 

resulting in reduced spill light 

• Adjustable to 30-degrees in any 

direction from the vertical 

• There is a choice of spot or 

flood beams 

• Simple installation and easy 

maintenance. Tidon can be 

fixed without any tools into most 

suspended ceilings using the 

rubber sleeved spring clips and 

plug connectors to the electronic 

gear 

• Recess depth is just 150mm 

• The compact aperture(s) 

and sleek frame effortlessly 

complement the display space 

Ordering Guide Supplied complete with LEDs. Driver to be ordered separately 


TIDON-S1 1X20W LED SP L830 GRY 1.5 96107407 

TIDON-S1 1X20W LED FL L830 GRY 1.5 96107408 











Universal LED Driver, dimmable 

LED DRIVER 25W DIM 1-10V 0.2 96063453 

Accessories for all versions 

TIDON-S1 WEIGHT DISTRIBUTION PANEL 0.4 96107652 

TIDON-S2/S3 WEIGHT DISTRIBUTION PANEL 0.8 96107653 

SP - Spot beam, FL - Flood beam, GRY - Grey

17 

Prospector LED - Available July 2010 

Prospector LED combines 

the positive attributes 

of existing spotlight 

designs, but in addition 

it possesses novel 

characteristics which are 

not exhibited by any 

other well-established 

light source, thus opening 

up additional retail and 

display possibilities. 


• The spotlight’s specular facetted 

precision reflector features 

Cree’s 12W LED light engine 

and innovative ‘True White’ 

technology, a patented method 

of delivering warm-white light 

with superior colour rendering 

and efficiency. It delivers a 

2700K light with a CRI > 90 

• With these attributes, the LED 

spotlight achieves the lighting 

level, and quality, of a 35W 

low-voltage halogen reflector 

lamp for just a third of the 

energy consumption while 

only a fraction of the heat is 

produced 

• A 2 x 9.5° beam angle 

ensures precise, uniform, accent 

lighting for retail and display 

applications 

• The long service life 

(50,000 hours at 70% lumen 

maintenance) is supported by 

heat pipe cooling transmission, 

with the heat produced by the 

LED light engine dissipated from 

the body via integrated cooling 

fins. 

• Prospector LED is versatile 

and flexible in use. There are 

two mounting options: direct 

to 3-circuit track or cable 

suspended for use as a pendant 

• 3-circuit track option offers 365° 

rotation and up to 90° tilt, 

lockable via an Allen screw. 

• No IR or UV radiation 

• No mercury or no lead 

• Switches on and off 

instantaneously 

Ordering Guide Supplied with LEDs 


Prospector LED 3 circuit track mounted 

PROSPECTOR 1X12W LED L927 MT3 SP WHI 1.2 96107961 

PROSPECTOR 1X12W LED L927 MT3 SP GRY 1.2 96107962 

Prospector LED ceiling suspended 

PROSPECTOR 1X12W LED L927 SP WHI 1.2 96107963 

PROSPECTOR 1X12W LED L927 SP GRY 1.2 96107964 

SP - Spot beam, WHI - White, GRY - Grey

17 

Outdoor Lighting

21 

Contrast LED 

Contrast LED is ideal 

for use on architectural 

features and decorative 

areas. 

It produces exciting 

lighting and coloured 

effects without wasteful 

spillage onto surrounding 

details. 


• Intensive LED technology for 

efficient light beam (+/-4°) 

• 54 LEDs for monochromatic 

versions 

• 36 LEDs for RGB versions 

• Slim circular shape for easy 

integration 

• A Gore-Tex ® screw-in vent 

constantly allows the floodlight 

to breathe with changing 

environmental conditions, 

eliminating condensation and 

ensuring an IP65 seal 

• Distinctly styled, ultra-modern 

design with heat dissipation fins 

to maximise heat transfer and to 

ensure the life time of the LEDs 

• IP65/IK08 floodlight body 

• Pre-wired floodlight for easy 

installation 

• IP66/IK08 remote connection 

box with self retaining screws 

Ordering Guide One code includes the Contrast LED with its connection box including power supply for the 

monochromatic versions and power supply + DMX system for the RGB version 


Monochromatic versions 

CONTRAST LED 86.6W 54LED WHI/6000K 6.3 96254292 

CONTRAST LED 86.6W 54LED WHI/3000K 6.3 96254293 

CONTRAST LED 86.6W 54LED BLU 6.3 96254294 

CONTRAST LED 60W 54LED RED 6.3 96254267 

CONTRAST LED 86.6W 54LED GRN 6.3 96254268 

RGB version 

CONTRAST LED 51.6W 36LED RGB DMX 7.0 96254269 

Accessories Ordering Guide A wide selection of attachments can be fixed on the Contrast LED front. The 

accessories can be superimposed and used with prismatic glasses or refractors to offer a variety number of light 

effects. All adjustments can easily be made on site 


CONT R0 GL/FR S/S SINT (OMS) Semi-intensive symmetrical 1.0 96002503 

CONT R0 GL A/S SINT (OMP) Semi-extensive asymmetrical 1.0 96002504 

CONT R0 GL A/S EXT (OMW) Extensive asymmetrical 1.0 96002505 

CONT R0 GL S/S XEXT (OME) Super extensive symmetrical 1.0 96002506 

CONT R0 LR1 Medium wide refractor 1.0 96002500 

CONT R0 LR2 Wide refractor 1.0 96002501 

CONT R0 LR3 Narrow refractor 1.0 96002502 

CONTRAST R0 GL CHROMAT CORRECTION FILTER Warmer glass LEE filter 205 1.0 96254526 

CONT R0 WG Wire guard 1.0 96002511 

CONT R0 LV Fixed anti glare louvre 0.7 96002508 

CONT R0 LV/AJ Adjustable anti glare louvre 0.7 96005841 

CONT R0 AGF Spill light controller 1.0 96216220 

CONT R0 VS Visor 0.4 96002516 

CONTRAST C0/R0 AGS (x1) Barn door (x1) 1.0 96002507 

Accessories 

CONTRAST SPECTRA MEMORY BOX (FOR SOFT) 1.7 96253059 

CONTRAST SPECTRA SPECTRASOFT CD 0.1 96012345 

WHI - White, BLU - Blue, GRN - Green

23 

QBA LED 

Engineered for long 

life, and highly energy 

efficient, Qba LED offers 

a choice of colours and 

controls which enables 

creative lighting schemes 

to be implemented 

quickly and easily. 


• All Qba LED floodlights can 

easily be combined with other 

Qba products, allowing existing 

installations to be augmented 

with confidence. 

• 18 LEDs for monochromatic 

versions (from +/- 5.6° to 6.6° 

beam) 

• 8 multichip LEDs for the RGB 

version (12° beam) for better 

colour mixing 

• IP66/IK08 floodlight 

• Easy to combine with 

conventional Qba floodlights 

• DMX connection card integrated 

for the RGB version 

• Integral gear for all versions 

Ordering Guide One code includes the Qba LED with integral power supply for the monochromatic 

versions and power supply + DMX system for the RGB version 


Monochromatic versions 

QBA LED 24W 18LED WHI/6000K 6.0 96254271 

QBA LED 24W 18LED WHI/3000K 6.0 96254272 

QBA LED 24W 18LED BLU 6.0 96254273 

QBA LED 24W 18LED RED 6.0 96254274 

QBA LED 24W 18LED GRN 6.0 96254275 

QBA LED 24W 18LED AMB 6.0 96254276 

RGB version 

QBA LED 36W 8LED RGB DMX 5.8 96254277 

Accessories Ordering Guide 


QBA VS Visor 0.4 96012228 

QBA WG Wire guard 0.4 96012229 

QBA AGS (x4) Set of 4 barn doors 0.8 96012230 

QBA LV Louvre 0.8 96012231 

QBA FILTER REFR 555B V Vertical prism 0.6 96220097 

QBA FILTER REFR 555B H Horizontal prism 0.6 96220098 

QBA GL CHROMATIC CORRECTION FILTER Warmer glass LEE filter 205 0.4 96254527 

QBA SHORT STIRRUP Wall stirrup 0.4 96012236 

Accessories 



WHI -White, BLU - Blue, GRN - Green, AMB - Amber

25 

Milo R/I 

An innovative outdoor 

LED spotlights that offer 

easy beam adjustment 

and image projection 

with the use of the 

GABO attachment. 


• Superior optical system, similar 

to camera optics 

• Simple to use patented beam 

adjustment, which allows 

the beam to be altered after 

installation, simply by Allen key 

• LEDs combine reduced power 

consumption with lower 

maintenance costs 

• Range includes remote gear 

(ordered separately) and integral 

gear 

• Unique gobo support accessory 

available for outdoor image 

projection, has a fully 

weatherproofed IP65 compact 

body 

• All Milo models are cool touch 

for added safety 

• Durable aluminium construction 

offering longer luminaire life and 

UV resistance 

Milo I 

Gabo 

Ordering Guide Supplied complete with LED lamp. Milo R requires gear ordered separately 


Milo R 

Gears 

MILO R GT 17W 0.7A-24V 

Bodies 

2.0 96231579 

MILO R 1X2,4W 1LED YEL AMB 1.0 96256603 

MILO R 1X2,4W 1LED RED 1.0 96256600 

MILO R 1X2,4W 1LED GRN 1.0 96256599 

MILO R 1X2,4W 1LED BLU 1.0 96256598 

MILO R 1X2,4W 1LED WHI/3000K 1.0 96256602 

MILO R 1X2,4W 1LED WHI/6000K 

Milo I 

Bodies 

1.0 96256601 

MILO I 1X2,4W 1LED AMB 1.4 96256597 

MILO I 1X2,4W 1LED RED 1.4 96256594 

MILO I 1X2,4W 1LED GRN 1.4 96256593 

MILO I 1X2,4W 1LED BLU 1.4 96256592 

MILO I 1X2,4W 1LED WHI/3000K 1.4 96256596 

MILO I 1X2,4W 1LED WHI/6000K 

Attachments and Accessories 

1.4 96256595 

MILO GOBO SUPPORT 

WHI -White, BLU - Blue, GRN - Green, AMB - Amber 

0.6 96 231578

ADAN 

Adjustable 

single-colour LED unit 

for outdoor architectural 

lighting. 

Adan is ideal for 

all those spaces 

where lighting design 

contributes to optimal 

highlighting of features. 


• Adan offers low energy 

consumption and long service 

life (around 50,000 hours of 

use) 

• Available with single-colour light 

in various colours: red, green, 

blue, amber and warm or cold 

white (3000K or 5500K) 

• High precision tri-lens optics for 

lighting effects suited to every 

need 

• Compact size and minimalist 

style allow Adan to be installed 

in any area or setting 

• Locking screws enables for the 

tilt to be adjusted easily 

• IP66 rated 

• Integral gear 

• RGB version available on 

request 



ADAN 3X1.2W LED WHI (3000) 240V 0.6 96063311 

ADAN 3X1.2W LED WHI (5500) 240V 0.6 96063312 

ADAN 3X1.2W LED RED 240V 0.6 96063313 

ADAN 3X1.2W LED GRN 240V 0.6 96063314 

ADAN 3X1.2W LED BLU 240V 0.6 96063315 

ADAN 3X1.2W LED AMB 240V 0.6 96063316 

WHI -White, BLU - Blue, GRN - Green, AMB - Amber 

26

27 

Cesar LED 

Cesar’s simple, 

cylindrical style, offers a 

choice of monochromatic 

LED colours for superior 

highlighting solutions. 


• Stainless steel screws promote 

additional resistance and easy 

maintenance 

• IP65 protection 

• Delivered with integral gear 

• Safe and simple installation 

using a single tool 

• Automatic connection reduces 

installation time and cost 

• Adjustable lamp positioning 

enhances versatility 

• Strong die-cast aluminium 

construction combines elegance 

with high durability 



Size 1 LED versions - Up/Downlight 

CESAR 1 2X3W 3LED WHI 1.9 96231452 

CESAR 1 2X3W 3LED BLU 1.9 96231453 

CESAR 1 2X3W 3LED GRN 1.9 96231454 

CESAR 1 2X3W 3LED RED 1.9 96231455 

CESAR 1 2X3W 3LED YEL 1.9 96231456 

Size 1 LED versions - Downlight 

CESAR 1 1X3W 3LED WHI 1.7 96231435 

CESAR 1 1X3W 3LED BLU 1.7 96231436 

CESAR 1 1X3W 3LED GRN 1.7 96231437 

CESAR 1 1X3W 3LED RED 1.7 96231438 

CESAR 1 1X3W 3LED YEL 1.7 96231439 

WHI -White, BLU - Blue, GRN - Green, YEL - Yellow

Mica Slim LED 

Shallow, in-ground 

‘drive over’ luminaires 

for accent or guidance 

lighting. 

Mica Slim is remarkably 

flexible, in each size 

there is the option for 

the designer to achieve 

illumination/effect 

lighting or guidance/ 

marker lighting. 


• Shallow installation depth 

• Pre-wired for quick installation 

within the recessing box 

• Round stainless steel frame offers 

pleasing aesthetic 

• Clear or frosted glass 

• Sealed to IP67 with high 

mechanical resistance, IK10 

• Flat toughened front glass 

gives a static load capacity of 

5000kg. Car speed: 30km/h 

Ordering Guide Supplied complete with recessed housing, body and frame glass 


Small size - MICA SLIM SST Frosted Glass 

(2W 10 LEDs) 

Clear Glass 

(1.2W 1 LED 

MICA SLIM SST WHI EFL 1.7 96503752 96503614 

MICA SLIM SST BLU EFL 1.7 96503753 96503615 

MICA SLIM SST RED EFL 1.7 96503754 96503616 

MICA SLIM SST GRN EFL 1.7 96503755 96503617 

MICA SLIM SST YEL EFL 1.7 96503756 96503618 

Medium size - MICA SLIM ST Frosted Glass 

(4.5W 16 LEDs) 

Clear Glass 


MICA SLIM ST WHI EFL 2.9 96503641 96503636 

MICA SLIM ST BLU EFL 2.9 96503642 96503637 

MICA SLIM ST RED EFL 2.9 96503643 96503638 

MICA SLIM ST GRN EFL 2.9 96503644 96503639 

MICA SLIM ST YEL EFL 2.9 96503645 96503640 

Large size - MICA SLIM AT Frosted Glass 


Semi-frosted Glass 


MICA SLIM AT RGB EFL DMX 5.8 96503665 96503664 

Accessories 



WHI - White, BLU - Blue, GRN - Green, YEL - Yellow 

28

29 

Intensive LED 

Aesthetic, slim linear LED 

exterior luminaire with a 

concentrated and uniform 

beam. 

Intensive LED is a 

versatile fitting that utilises 

the latest LED technology 

to combine the uniform 

intensive illumination of 

columns and towers with 

low energy consumption. 


• Uniform broad band illumination 

even if multiple Intensive LED 

systems are combined side by 

side 

• High intensity of beam for up to 

10 metres 

• Slim linear style 

• Sealed to IP67 

• Choice of 5 colour outputs for 

monochromatic versions 

• RGB version available 

• Very low power consumption 

and long operating life 

• Low installation and 

maintenance costs 

• Wall mounting brackets offer 

angular adjustment for façade 

lighting 

• Integral gear 

• Polycarbonate enclosure 

• RDM compliant 



INTENSIVE LED 300 10W WHI (3000) 2.0 96063317 


INTENSIVE LED 300 10W RED 2.0 96063319 

INTENSIVE LED 300 10W GRN 2.0 96063320 

INTENSIVE LED 300 10W BLU 2.0 96063321 

INTENSIVE LED 300 10W AMB 2.0 96063322 

INTENSIVE LED 300 10W RGB 2.0 96063323 







INTENSIVE LED 600 20W RGB 3.0 96063330 







INTENSIVE LED 1200 45W RGB 

WHI - White, BLU - Blue, GRN - Green, AMB - Amber 

6.0 96063337

31 

Adelie 

Style, comfort and 

durability in a uniquely 

designed indirect LED 

lantern. 

Adelie incorporates 

durable design with LED 

technology to provide 

easy integration in both 

classic and modern 

environments. It offers 

comfortable lighting to 

create a soft ambience 

in parks and building 

surrounds. 


• Indirect light, elegant and simple 

design 

• Available in 3000K and 5300K 

colour 

• Cast aluminium ribbed base 

to optimise dissipation of heat 

for longer life of LEDs (up to 

50,000 hours) 

• Design of canopy, reflector 

and optics optimised for visual 

comfort and uniformity 

• Robust and durable aluminium 

construction, sealed to IP65 

• Easy installation and 

maintenance 

• Concealed screws, fixings and 

technical elements 

• Low cost of ownership 

Ordering Guide Supplied complete with LEDs. Order lantern and column for complete fitting 


Lantern (with driver) 

ADELIE 32W LED 5300K 7.5 96254108 

ADELIE 32W LED 3000K 7.5 96257121 

Dedicated aluminium column 

ADELIE COL 3M MPL GRY 10.2 96254572 

ADELIE COL 3M MGR GRY 10.5 96254574 

Pole Accessories 

FOUNDATION BOLTS - 96062227 

CAGE ASSEMBLY - 96062228 

GRY - grey, MGR - buried, MPL - base plate

33 

Promenade LED 

A solid and elegant 

range of bollard and 

parapet luminaires 

equipped with LED’s to 

light and create coloured 

ambiances for pathways, 

entrances, business 

centres and parks. 

Promenade’s new and 

unique optical system 

optimises the light output 

uniformity. High powered 

white LEDs enable this 

stylish bollard/parapet 

luminaire to efficiently 

light pedestrian areas. 


• Elegant design for easy 

integration in a variety of 

applications 

• Robust and vandal resistant 

die-cast aluminium (LM6) body 

• Options of Base plate, buried 

(via accessory) or parapet 

mounting 

• Expresses safety, strength and 

harmony in urban amenity 

lighting applications 

• Polycarbonate diffuser with sandblasted 

anti-glare band 

• Optimised output ensures no 

obtrusive light 

• Low voltage LEDs for energy 

savings, long life and reduced 

maintenance 

• A removable accessory allows 

either the whole upper part 

or just the top cone to be lit 

in colour depending on the 

required effect 

• RGB dynamic colour change 

version available on request 



Bollard, flange mounted 

PROMENADE BOL LED WHI/AMB 1150MM MPL ANT 12 96250884 

PROMENADE BOL LED WHI/RED 1150MM MPL ANT 12 96250885 

PROMENADE BOL LED WHI/GRN 1150MM MPL ANT 12 96250886 

PROMENADE BOL LED WHI/BLU 1150MM MPL ANT 12 96250887 

Buried mounted 

BOLLARD MGR SPIKE 2.0 96005367 

Parapet mounted 

PROMENADE BOL LED WHI/BLU 325MM MPL ANT 8 96231682 

PROMENADE BOL LED WHI/GRN 325MM MPL ANT 8 96231683 

PROMENADE BOL LED WHI/RED 325MM MPL ANT 8 96231684 

PROMENADE BOL LED WHI/AMB 325MM MPL ANT 8 96231685 

WHI - White, AMB - Amber, BLU - Blue, GRN - Green, MGR - buried, MPL - base plate

Street LED 

A cost-effective’ long 

life and environmentally 

friendly LED street lamp. 


• Revolutionary photometric 

design and spot rectangular 

beam pattern ensures uniform 

brightness and beam distribution 

• Unique integrated lens and 

lampshade design - lens 

array design avoids wasteful 

duplication and loss of light, 

and reduces overall weight 

• Innovative `slide shell’ 

construction allows for easy, low 

cost maintenance compared 

with conventional lighting 

• Attractive, slim line appearance 

also reduces wind resistance 

and weight efficiency 

• Low glare, strobe-free and 

controlled distribution reduces 

hazard risk to drivers 

• Low temperature, impact 

resistant, free from ultraviolet or 

infrared 

• High colour index provides true 

colouration 

• Considerable energy savings 

- in excess of 50% less than 

conventional sodium and 

mercury lamps 

• Long life - up to 50,000 

hours - around six times the life 

of conventional sodium and 

mercury lamps 



STREET LED 56W WHI (5500) 2 Module 7.0 96063548 



WHI - White 

34

Head Offices 

Australia 

Sydney 

Thorn Lighting Pty Limited 

43 Newton Road 

Wetherill Park NSW 2164 

Tel: (02) 8786 6000 

Fax: (02) 9612 2700 

e-mail: infoaustralia@thornlighting.com 

www.thornlighting.com.au 

Australian Branches 

New South Wales 

Sydney 

43 Newton Road 

Wetherill Park NSW 2164 

Tel: 1300 13 99 65 

Sales Fax: 1300 13 99 53 

Project Fax: 1300 13 99 57 

Northern Territory 

Darwin 

Unit 3/132 Coonawarra Road 

Winnellie N.T. 0820 

Tel: 1300 13 99 65 

Sales Fax: 1300 13 99 53 

Project Fax: 1300 13 99 57 

Western Australia 

Perth 

2/32 Sarich Court 

Osborne Park WA 6017 

Tel: 1300 13 99 65 

Sales Fax: 1300 13 99 53 

Project Fax: 1300 13 99 57 

Tasmania 

Hobart 

12 Fleet Street 

Moonah TAS 7009 

Tel: 1300 13 99 65 

Sales Fax: 1300 13 99 53 

Project Fax: 1300 13 99 57 

New Zealand Branches 

Wellington 

Unit 12, 4 Tyers Road, Ngauranga 

Wellington 6035 

P O Box 31281, Lower Hutt 

Wellington 5040 

Tel: +64 (4) 815 8010 

Fax: +64 (4) 499 6058 

New Zealand 

Auckland 

Thorn Lighting (NZ) Limited 

399 Rosebank Road, Avondale, 

Auckland 1026 

PO Box 71134, Rosebank 

Auckland 1348 

Tel: +64 (9) 828 7155 

Fax: +64 (9) 828 7591 

e-mail: info.NZ@thornlighting.com 

www.thornlighting.co.nz 

South Australia 

Adelaide 

22-32 Kinkaid Avenue 

North Plympton SA 5037 

Tel: 1300 13 99 65 

Sales Fax: 1300 13 99 53 

Project Fax: 1300 13 99 57 

Victoria 

Melbourne 

55 McGregors Drive 

Keilor Park VIC 3042 

Tel: 1300 13 99 65 

Sales Fax: 1300 13 99 53 

Project Fax: 1300 13 99 57 

Queensland 

Brisbane 

605 Zillmere Road 

Aspley QLD 4034 

Tel: 1300 13 99 65 

Sales Fax: 1300 13 99 53 

Project Fax: 1300 13 99 57 

Christchurch 

11 Lancaster Street, Waltham, 

Christchurch 8011 

P O Box 2076, CMC 

Christchurch 8140 

Tel: +64 (3) 366 2485 

Fax: +64 (3) 366 8905 

Thorn Lighting is constantly developing and improving its products. All descriptions, illustrations, drawings and specifications in this 

publication present only general particulars and shall not form part of any contract. The right is reserved to change specifications without 

prior notification or public announcement. All goods supplied by the company are supplied subject to the company’s General Conditions 

of Sale, a copy of which is available on request. All measurements are in millimetres and weights in kilograms unless otherwise stated. 

Publication Date: 03/10

LED Lighting - Thorn

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?