Wisconsin Department of Justice Identification Manual - Imprimus ...

Security
• Near your records management terminal used to create booking
records;
• Interview room;
• Defendant holding areas;
• Remote precincts;
• Intake
The Fast ID device is password protected. The default password will be set to
“12345” for each device. After 3 unsuccessful sign in attempts, access will be
restricted. Should this occur, call the Morpho help desk at (800) 526-2674.
Unit Dimensions
7.5" l x 3"w x 2.25"h, weighing under 3 pounds. The power supply is 3” x 2 1/2” x
2”, weighs approximately 1 pound, and should be supported on a flat surface.
No mounting devices are included. This is a stand-alone desktop unit.
It’s recommended they not be mounted flat on a wall, since it creates awkward finger
placement that may result in less identifications. We’re told a 30% angle works
well.
Power Specifications
• Input = 120 Volts, 60 Hertz, 25 Watts
• Output = DC 12 Volts, 1.2 amps
Using Fast ID
How to Use Fast ID
1. Press the upper left blue key under the word “LOGON”.
2. Enter the password: “12345” the press the green “OK” key.
3. Press the upper left blue key under the word “IDENT”.
4. Press any key to continue.
5. Place the person’s right index finger on the platen making certain
the fingertip touches the top of the finger guide directly below the
zero.
Wisconsin Department of Justice Identification Manual Fast ID • 631