Powers 3.1mm Smooth Bright Nails - Tucks Fasteners & Fixings
Powers 3.1mm Smooth Bright Nails - Tucks Fasteners & Fixings Powers 3.1mm Smooth Bright Nails - Tucks Fasteners & Fixings
DECLARATION OF PERFORMANCE DoP No. 497-10/3,1-S-BR 1. Product Type: Bright smooth shank nails 2. Identification: DH LL 1) x 31-S-BR and FRH LL 1) x 31-S-BR 3. Intended Use: For structural timber products 4. Manufacturer: Powers Fasteners Europe B.V., Westrak 208, 1771 SV Wieringerwerf, The Netherlands 5. Representative: n/a 6. Assessment of Verification of Constancy of Performance 3 7.,8. Technical Specifications & Notified Bodies: Task Performed Performed By NB # Initial Type Testing Factory Production Control 9. Declared Performance System of Assessment Report EN Standard VHT 1503 3 497-10/3,1-br-smooth EN 14592:2008+A1:2012 Powers Fasteners - 3 - - Dimensions: Diameter – d: 3.1 mm Profile Length – Lg: n/a Head Area – Ah: DH 30.2 mm² Point Length – Lp: 4.3 mm FRH 38.8 mm² Length – LL: 50-90 mm Durability: Material Low carbon steel EN 14592:2008+A1:2012 in accordance with EN 10016-2 2 Tensile Strength Minimum 700N/mm EN 14592:2008+A1:2012 in accordance with EN10218-1 Corrosion Protection Service Class1: bright EN 14592:2008+A1:2012 in accordance with EN1995-1 Mechanical Strength and Stiffness: Char. Yield Moment Char. Withdrawal Parameter in timber with char. density ρ k =350 kg/m³ Char. Head Pull Through Parameter in timber with char. density ρ k =350 kg/m³ M y,k = 3410 Nmm f ax,k = 2.45 N/mm² f head,k = 8.58 N/mm² EN 14592:2008+A1:2012 Tested to EN 409 EN 14592:2008+A1:2012 Tested to EN 1459-2 EN 14592:2008+A1:2012 Tested to EN 1459-2 Char. Tensile Capacity f tens,k = not determined n / a 10. The performance of the product identified in points 1 and 2 is in conformity with the declared performance in point 9. This declaration of performance is issued under the sole responsibility of the manufacturer identified in point 4. DoP No. 497-10/3,1- S-BR (R1) 1) LL=nail length
DECLARATION OF PERFORMANCE<br />
DoP No. 497-10/3,1-S-BR<br />
1. Product Type: <strong>Bright</strong> smooth shank nails<br />
2. Identification: DH LL 1) x 31-S-BR and FRH LL 1) x 31-S-BR<br />
3. Intended Use: For structural timber products<br />
4. Manufacturer: <strong>Powers</strong> <strong>Fasteners</strong> Europe B.V., Westrak 208, 1771 SV Wieringerwerf, The Netherlands<br />
5. Representative: n/a<br />
6. Assessment of Verification of Constancy of Performance 3<br />
7.,8. Technical Specifications & Notified Bodies:<br />
Task Performed Performed By NB #<br />
Initial Type<br />
Testing<br />
Factory<br />
Production Control<br />
9. Declared Performance<br />
System of<br />
Assessment<br />
Report<br />
EN Standard<br />
VHT 1503 3 497-10/3,1-br-smooth EN 14592:2008+A1:2012<br />
<strong>Powers</strong> <strong>Fasteners</strong> - 3 - -<br />
Dimensions:<br />
Diameter – d: 3.1 mm Profile Length – Lg: n/a<br />
Head Area – Ah: DH 30.2 mm² Point Length – Lp: 4.3 mm<br />
FRH 38.8 mm²<br />
Length – LL:<br />
50-90 mm<br />
Durability:<br />
Material<br />
Low carbon steel<br />
EN 14592:2008+A1:2012 in<br />
accordance with EN 10016-2<br />
2<br />
Tensile Strength Minimum 700N/mm<br />
EN 14592:2008+A1:2012 in<br />
accordance with EN10218-1<br />
Corrosion Protection<br />
Service Class1: bright<br />
EN 14592:2008+A1:2012 in<br />
accordance with EN1995-1<br />
Mechanical Strength and Stiffness:<br />
Char. Yield Moment<br />
Char. Withdrawal Parameter<br />
in timber with char. density ρ k =350 kg/m³<br />
Char. Head Pull Through Parameter<br />
in timber with char. density ρ k =350 kg/m³<br />
M y,k = 3410 Nmm<br />
f ax,k = 2.45 N/mm²<br />
f head,k = 8.58 N/mm²<br />
EN 14592:2008+A1:2012<br />
Tested to EN 409<br />
EN 14592:2008+A1:2012<br />
Tested to EN 1459-2<br />
EN 14592:2008+A1:2012<br />
Tested to EN 1459-2<br />
Char. Tensile Capacity f tens,k = not determined n / a<br />
10. The performance of the product identified in points 1 and 2 is in conformity with the declared performance in point 9.<br />
This declaration of performance is issued under the sole responsibility of the manufacturer identified in point 4.<br />
DoP No. 497-10/3,1- S-BR (R1)<br />
1)<br />
LL=nail length
Signed for and on behalf of the manufacturer by:<br />
_________________________<br />
Colin Earl<br />
VP HTF CDIY Europe<br />
___________________________<br />
Dr. Ing. Thilo Pregartner<br />
Senior Engineering Manager<br />
DoP No. 497-10/3,1- S-BR (R1)<br />
1)<br />
LL=nail length