SAFETY DATA SHEET Sodium sulfate anhydrous, Extra ... - Labbox
SAFETY DATA SHEET Sodium sulfate anhydrous, Extra ... - Labbox SAFETY DATA SHEET Sodium sulfate anhydrous, Extra ... - Labbox
SAFETY DATA SHEET Sodium sulfate anhydrous, Extra Pure BP, USP 7. Handling and storage (continued) Specific end use(s) : None. 8. Exposure controls/personal protection 8.1. Exposure controls Personal protection • Respiratory protection • Hand protection • Eye protection • Others : Avoid all unnecessary exposure. : Wear approved mask. : Wear protective gloves. : Chemical goggles or safety glasses. : When using, do not eat, drink or smoke. 8.2. Control parameters Occupational Exposure Limits : No data available. 9. Physical and chemical properties 9.1. Information on basic physical and chemical properties Physical state at 20 °C : Solid. Colour : White. Odour : Odourless. Odour threshold : No data available. pH value : 4 - 7 (200 g/l, H2O, 20 °C) Melting point [°C] : 888 Decomposition point [°C] : No data available. Critical temperature [°C] : Not applicable. Auto-ignition temperature [°C] : No data available. Flammability (solid, gas) : No data available. Flash point [°C] : Not applicable. Initial boiling point [°C] : Not applicable. Final boiling point [°C] : Not applicable. Thermal decomposition [°C] : 890 Evaporation rate : Not applicable. Vapour pressure [20°C] : No data available. Vapour density : No data available. Density [g/cm3] : 2.7 (20 °C) Density [g/cm3] : No data available. Relative density, liquid (water=1) : Not applicable. Bulk density [kg/m3] : 1400 - 1600 Solubility in water : 200 g/l (20 °C) Log Pow octanol / water at 20°C : No data available. Viscosity at 40°C [mm2/s] : No data available. Revised edition no : 0 Page : 4 Date : 15/1/2013 Supersedes : 0/0/0
SAFETY DATA SHEET Sodium sulfate anhydrous, Extra Pure BP, USP 9. Physical and chemical properties (continued) 9.2. Other information Explosive properties Explosion limits - upper [%] Explosion limits - lower [%] Oxidising properties : No data available. : No data available. : No data available. : No data available. 10. Stability and reactivity 10.1. Reactivity Reactivity : Not established. 10.2. Chemical stability Chemical stability : Stable under recommended storage conditions. 10.3. Possibility of hazardous reactions Hazardous reactions : Not established. 10.4. Conditions to avoid Conditions to avoid : Direct sunlight. Extremely high or low temperatures. 10.5. Incompatible materials Materials to avoid : Strong acids. Strong bases. 10.6. Hazardous decomposition products Hazardous decomposition products : Fumes. Carbon monoxide. Carbon dioxide. 11. Toxicological information 11.1. Information on toxicological effects Acute toxicity • Inhalation • Dermal • Ingestion Corrosion Irritation Sensitization Mutagenicity Carcinogenicity Toxic for reproduction : Based on available data, the classification criteria are not met. : Based on available data, the classification criteria are not met. : Based on available data, the classification criteria are not met. : Based on available data, the classification criteria are not met. : Based on available data, the classification criteria are not met. : Based on available data, the classification criteria are not met. : Based on available data, the classification criteria are not met. : Based on available data, the classification criteria are not met. : Based on available data, the classification criteria are not met. Revised edition no : 0 Page : 5 Date : 15/1/2013 Supersedes : 0/0/0
- Page 1 and 2: SAFETY DATA SHEET Sodium sulfate an
- Page 3: SAFETY DATA SHEET Sodium sulfate an
- Page 7: SAFETY DATA SHEET Sodium sulfate an
<strong>SAFETY</strong> <strong>DATA</strong> <strong>SHEET</strong><br />
<strong>Sodium</strong> <strong>sulfate</strong> <strong>anhydrous</strong>, <strong>Extra</strong> Pure BP, USP<br />
7. Handling and storage (continued)<br />
Specific end use(s)<br />
: None.<br />
8. Exposure controls/personal protection<br />
8.1. Exposure controls<br />
Personal protection<br />
• Respiratory protection<br />
• Hand protection<br />
• Eye protection<br />
• Others<br />
: Avoid all unnecessary exposure.<br />
: Wear approved mask.<br />
: Wear protective gloves.<br />
: Chemical goggles or safety glasses.<br />
: When using, do not eat, drink or smoke.<br />
8.2. Control parameters<br />
Occupational Exposure Limits<br />
: No data available.<br />
9. Physical and chemical properties<br />
9.1. Information on basic physical and chemical properties<br />
Physical state at 20 °C<br />
: Solid.<br />
Colour<br />
: White.<br />
Odour<br />
: Odourless.<br />
Odour threshold<br />
: No data available.<br />
pH value<br />
: 4 - 7 (200 g/l, H2O, 20 °C)<br />
Melting point [°C] : 888<br />
Decomposition point [°C]<br />
: No data available.<br />
Critical temperature [°C]<br />
: Not applicable.<br />
Auto-ignition temperature [°C] : No data available.<br />
Flammability (solid, gas)<br />
: No data available.<br />
Flash point [°C]<br />
: Not applicable.<br />
Initial boiling point [°C]<br />
: Not applicable.<br />
Final boiling point [°C]<br />
: Not applicable.<br />
Thermal decomposition [°C] : 890<br />
Evaporation rate<br />
: Not applicable.<br />
Vapour pressure [20°C]<br />
: No data available.<br />
Vapour density<br />
: No data available.<br />
Density [g/cm3]<br />
: 2.7 (20 °C)<br />
Density [g/cm3]<br />
: No data available.<br />
Relative density, liquid (water=1) : Not applicable.<br />
Bulk density [kg/m3] : 1400 - 1600<br />
Solubility in water<br />
: 200 g/l (20 °C)<br />
Log Pow octanol / water at 20°C : No data available.<br />
Viscosity at 40°C [mm2/s]<br />
: No data available.<br />
Revised edition no : 0 Page : 4<br />
Date : 15/1/2013 Supersedes : 0/0/0