EMB-500 - Embraer
EMB-500 - Embraer
EMB-500 - Embraer
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
GROUND HANDLING AND<br />
SERVICING HANDBOOK<br />
BEADS TO PREVENT DAMAGE.<br />
CAUTION: • DO NOT PUT CLEANING CLOTHS, BRUSHES, OR<br />
SPONGES IN A SOLVENT CONTAINER. THIS TO<br />
PREVENT SOLVENT CONTAMINATION.<br />
• CONTAMINATED SOLVENT CAN DAMAGE THE<br />
EQUIPMENT.<br />
CAUTION: DO NOT LET CLEANING PRODUCTS (SOLVENTS) TOUCH<br />
SEALANT BEADS, LENSES, POLYCARBONATE WIN-<br />
DOWS, WINDSHIELDS, PAINTED SURFACES, AND<br />
ACRYLIC PARTS. SOLVENTS CAN CAUSE DAMAGE TO<br />
THESE SURFACES.<br />
CAUTION: DO NOT PUT ON WATCHES, BRACELETS, RINGS, OR<br />
CLOTHES WITH ZIP FASTENERS WHEN YOU CLEAN WIN-<br />
DOWS. DO NOT USE METAL TOOLS TO CLEAN WIN-<br />
DOWS. METAL OBJECTS CAN SCRATCH THE<br />
TRANSPARENCY AND CAUSE OPTICAL DISTORTION.<br />
CAUTION: DO NOT USE ABRASIVE MATERIALS TO CLEAN WIN-<br />
DOWS. ABRASIVE MATERIALS CAN SCRATCH THE<br />
TRANSPARENCY AND CAUSE OPTICAL DISTORTION.<br />
(1) Remove all excess amounts of dirt and other foreign matter from the<br />
acrylic surface with clean water. Preferred initial application is by spraying<br />
or flooding the surface to wash away any abrasive materials. If spraying or<br />
flooding is impractical, a clean sponge or wipe cloth should be used.<br />
NOTE: Remove or cover/protect watches, rings, and other metal<br />
object on person (belt buckle, rivets on jeans, tools in pockets)<br />
that may cause scratches before any windshield maintenance.<br />
(2) Wash gently with 50/50 water-to-TT-I-735 alcohol solution containing a mild<br />
liquid soap in a 2% to 5% concentration.<br />
NOTE: The mild liquid soap can be detergents formulated for washing<br />
dishes by hand. Dawn, Joy, Palmolive or Ivory are recommended.<br />
(3) Rinse thoroughly with clean water and dry with a damp chamois, sponge,<br />
or wipe cloth.<br />
S. Job Close-Up<br />
CAUTION: TO PREVENT DAMAGE, EXAMINE ALL THE WORK AREAS<br />
TO MAKE SURE THAT YOU REMOVED ALL TOOLS AND<br />
EQUIPMENT AFTER YOU COMPLETED THE WORK.<br />
(1) Remove from the work area all tools, equipment and materials that you<br />
used.<br />
HARD COPY IS UNCONTROLLED. ONCE PRINTED, THIS PAGE MUST NOT BE RETAINED FOR FUTURE REFERENCE.<br />
BEFORE USING, MAKE SURE THIS HARD COPY IS THE LATEST ISSUE.<br />
EFFECTIVITY: ALL<br />
12-23-00-100-802-A/300<br />
Page 319/320<br />
Rev.06 - OCT 09/09<br />
Copyright © by <strong>EMB</strong>RAER S.A. - All rights reserved - See title page for details.