CCS C Compiler Manual PCB / PCM / PCH

Availability:
Requires:
Examples:
All devices
#USE DELAY
#use delay (clock=20000000)
delay_ms( 2 );
void delay_seconds(int n) {
for (;n!=0; n- -)
delay_ms( 1000 );
}
Example Files:
Also See:
ex_sqw.c
delay_us(), delay_cycles(), #USE DELAY
delay_us( )
Syntax:
delay_us (time)
Parameters: time - a variable 0-65535(int16) or a constant 0-65535
Note: Previous compiler versions ignored the upper byte of an int16, now the
upper byte affects the time.
Returns:
Function:
undefined
Creates code to perform a delay of the specified length. Time is specified in
microseconds. Shorter delays will be INLINE code and longer delays and
variable delays are calls to a function. This function works by executing a
precise number of instructions to cause the requested delay. It does not use
any timers. If interrupts are enabled the time spent in an interrupt routine is
not counted toward the time.
The delay time may be longer than requested if an interrupt is serviced during
the delay. The time spent in the ISR does not count toward the delay time.
Availability:
Requires:
Examples:
All devices
#USE DELAY
#use delay(clock=20000000)
do {
output_high(PIN_B0);
delay_us(duty);
172