14.11.2012 Views

Natural Deo Cream

Natural Deo Cream

Natural Deo Cream

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Dear Customer,<br />

Welcome to our new natural cosmetic formulary!<br />

<strong>Natural</strong> and organic cosmetic persists to be a strong trend. More and more suppliers discover their<br />

green conscience, and the number of available sustainable raw materials is constantly increasing.<br />

We are happy to see this positive development as an example where consumer needs are driving<br />

the industry to innovate towards ecologically friendly products.<br />

When I first visited the “Bio-Fach” exhibition twelve years ago the market for natural and organic<br />

cosmetics was a small niche, and I do not remember seeing anybody wearing a tie. In those days<br />

this market segment was not in the focus and the selection of suitable raw materials was much<br />

more limited. Consequently it was harder for formulators to develop attractive cosmetic products.<br />

The consumer on the other hand has been much more tolerant to accept the limitations of natural<br />

cosmetic products in terms of performance and cosmetic attributes.<br />

Since then we have continuously put our effort into pushing the limits of what modern natural<br />

cosmetics can be. Ten years ago many problems have been unsolved. Today we are able to<br />

present concepts like natural bath oil, shower gel, shower oil, night creams, sprayable emulsions<br />

and oil gels. These are only a few examples of product concepts which were unimaginable when<br />

we started our work in this field.<br />

This formulation booklet is a showcase of where natural cosmetic stands today with modern and<br />

attractive products. We are highly motivated to continue our efforts to push the limits for more<br />

exciting new product and raw material concepts in the future. There is still enough space for further<br />

improvement. To be continued in 2010……<br />

Kind regards<br />

Wilfried Petersen<br />

General Manager Hamburg, January 2009


O/W-Emulsions Skin Care <strong>Natural</strong> O/W Emulsion 6<br />

<strong>Natural</strong> Rich Face <strong>Cream</strong> 7<br />

<strong>Natural</strong> Caring <strong>Cream</strong> 8<br />

<strong>Natural</strong> Skin Serum 9<br />

<strong>Natural</strong> Body <strong>Cream</strong> 10<br />

<strong>Natural</strong> Body Spray 11<br />

<strong>Natural</strong> Moisture <strong>Cream</strong> 12<br />

Regenerating Hand <strong>Cream</strong> ECO 13<br />

Energizing Soft Serum ECO 14<br />

Sublim Mango <strong>Cream</strong> ECO 15<br />

<strong>Natural</strong> Skin Fluid 16<br />

Pre Tan Body Lotion ECO 17<br />

<strong>Natural</strong> Moisture Balm New 18<br />

<strong>Natural</strong> <strong>Deo</strong> <strong>Cream</strong> New 19<br />

<strong>Natural</strong> Firming Body Lotion New 20<br />

Anti-Stress Eco <strong>Cream</strong> New 21<br />

<strong>Natural</strong> Sport Aqua Body Lotion New 22<br />

W/O-Emulsions <strong>Natural</strong> Sun W/O 23<br />

<strong>Natural</strong> W/O Basic <strong>Cream</strong> 24<br />

<strong>Natural</strong> W/O Lotion 25<br />

Rinse-Off Skin Care <strong>Natural</strong> Cleansing Foam 26<br />

<strong>Natural</strong> Facial Cleansing Gel 27<br />

<strong>Natural</strong> Soothing Bath Oil 28<br />

Soft Cleansing Milk ECO 29<br />

<strong>Natural</strong> Sugar Scrub 30<br />

<strong>Natural</strong> Shower Gel Sensitive New 31<br />

<strong>Natural</strong> Shower Oil New 32<br />

Rinse-Off Hair Care <strong>Natural</strong> Clear Shampoo New 33<br />

<strong>Natural</strong> Shampoo Sensitive New 34<br />

Other Formulations <strong>Natural</strong> Clear Skin Tonic 35<br />

<strong>Natural</strong> Hydrating Skin Fluid 36<br />

<strong>Natural</strong> Regenerating Skin Fluid 37<br />

<strong>Natural</strong> Microemulsion 38<br />

<strong>Natural</strong> Make Up Liquid Foundation New 39<br />

<strong>Natural</strong> <strong>Deo</strong> Roll On Clear New 40<br />

<strong>Natural</strong> <strong>Deo</strong> Roll On Milk New<br />

41<br />

<strong>Natural</strong> Microemulsion Basic 42<br />

<strong>Natural</strong> Microemulsion Bath Oil 43<br />

Information on Products <strong>Natural</strong> Product List 44<br />

Dermosoft Performance Overview 46<br />

Dr. Straetmans Chemische Produkte GmbH, Merkurring 60-62, D-22143 Hamburg, Germany<br />

T +49 (0)40-66 93 56-0, F +49 (0)40-66 93 56-310, info@dr-straetmans.de<br />

http://www.dr-straetmans.de


dermosoft ® 688 ECO 7, 8, 10, 12, 15, 17, 19, 20, 24, 25, 29, 39<br />

dermosoft ® 700 B 8, 10, 15, 17, 20, 26<br />

Additives dermosoft ® 747 13, 26<br />

dermosoft ® 1388 ECO 9, 11, 18, 21, 22, 31, 33, 34, 36, 37<br />

dermosoft ® GMCY 6, 7, 8, 9, 10, 12, 13, 14, 16, 17, 18, 19, 24, 25, 28,<br />

29, 32, 35, 36, 37, 38, 39, 40, 41, 42, 43<br />

dermosoft ® GMC 23<br />

dermosoft ® SLL 20, 26, 32<br />

dermofeel ® TC-7 10, 17, 18, 29<br />

dermofeel ® MCT 6, 9, 11, 16, 23, 25, 32<br />

Oil Components dermofeel ® sensolv 19, 20, 21, 22, 23, 39<br />

dermofeel ® Ascorbyl Palmitate 6<br />

dermofeel ® E 74 A 7, 9, 16, 17, 20, 21, 22<br />

Antioxidants dermofeel ® PA-3 6, 7, 8, 10, 12, 13, 15, 18, 20, 21, 22, 26, 29, 31, 33,<br />

34, 35, 36, 37<br />

dermofeel ® Toco 70 6, 7, 8, 10, 11, 12, 13, 14, 15, 17, 18, 20, 21, 22, 23,<br />

24, 25, 27, 28, 29, 30, 32, 39<br />

dermofeel ® G 5 DO 38, 42, 43<br />

dermofeel ® G 10 DI 38, 42, 43<br />

Surfactants dermofeel ® G 5 O 27, 30, 40<br />

Hair Care<br />

dermofeel ® G 10 L 35<br />

dermofeel ® G 10 LW 26, 29, 36, 37, 39, 40<br />

dermofeel ® GSC 6, 9, 11, 12, 15, 16, 17, 19, 20, 39<br />

dermofeel ® PO 23, 31<br />

dermofeel ® PP 28<br />

dermofeel ® PR 23, 24, 25<br />

dermofeel ® PS 7, 10,18<br />

dermofeel ® SL 6, 7, 10, 18<br />

symbio ® muls GC 21, 22<br />

dermofeel ® P-30 26, 33, 34<br />

Dr. Straetmans Chemische Produkte GmbH, Merkurring 60-62, D-22143 Hamburg, Germany<br />

T +49 (0)40-66 93 56-0, F +49 (0)40-66 93 56-310, info@dr-straetmans.de<br />

http://www.dr-straetmans.de 2009-2


Claims: Preservative free<br />

Fragrance free<br />

<strong>Natural</strong> O/W Emulsion<br />

L016-17-307<br />

Phase Ingredient INCI Supplier %<br />

A Deionised Water Aqua 68.60<br />

dermofeel ® PA-3 Sodium Phytate, Aqua Dr. Straetmans 0.10<br />

Glycerol Glycerin 2.50<br />

Sodium Lactate (sol. 50%) Sodium Lactate Merck 1.00<br />

dermosoft ® GMCY Glyceryl Caprylate Dr. Straetmans 1.00<br />

Keltrol RD Xanthan Gum CP Kelco 0.50<br />

B dermofeel ® SL Sodium Stearoyl Lactylate Dr. Straetmans 1.00<br />

dermofeel ® GSC Glyceryl Stearate Citrate Dr. Straetmans 2.00<br />

Lanette O Cetearyl Alcohol Cognis 4.00<br />

Cutina GMS Glyceryl Stearate Cognis 3.00<br />

Olive Oil Olea Europaea (Olive) Fruit<br />

Oil<br />

Sunflower Seed Oil Helianthus Annuus<br />

(Sunflower) Seed Oil<br />

dermofeel ® Toco 70<br />

non-GMO<br />

Tocopherol, Helianthus<br />

Annuus (Sunflower) Seed<br />

Oil<br />

Disclaimer:<br />

The information contained herein is meant to demonstrate how our products can be used. The given data are suggestions without any<br />

guarantee aimed to support customers’ development. As production conditions at our customers’ facilities are beyond our control we<br />

refuse to accept any liability involved in the use of our products. Please observe possible third party patent rights.<br />

Page 6 O/W-Emulsions Skin Care<br />

2.00<br />

5.00<br />

Dr. Straetmans 0.20<br />

dermofeel ® Ascorbyl Palmitate Ascorbyl Palmitate Dr. Straetmans 0.10<br />

dermofeel ® MCT Tricaprylin Dr. Straetmans 4.00<br />

Phytosqualan Squalane Sophim 3.00<br />

C Ethanol Alcohol 2.00<br />

Manufacturing Procedure:<br />

1. Heat phase A up to 78°C. Disperse Keltrol.<br />

2. Heat phase B to 78°C. Emulsify phase B to phase A under stirring.<br />

3. Homogenize for 1-2 min. using an Ultra Turrax.<br />

4. Start to cool down to 32°C under stirring. Add Ethanol.<br />

Specification Values:<br />

Appearance: White emulsion.<br />

pH: 5.5 – 6.0.<br />

Viscosity (Brookfield: Helipath TE; Speed 10): Approx. 10 000 mPa . s.<br />

Centrifugation (4000 rpm, 15 min.): No separation.<br />

Stability: More than 3 months stable at 20°C, 40°C and 4°C.<br />

Microbiological Stability: Proven.<br />

100.00


Claims: Preservative free<br />

Anti Aging<br />

Rich skin feel<br />

<strong>Natural</strong> Rich Face <strong>Cream</strong><br />

L016-05-1007<br />

Phase Ingredient INCI Supplier %<br />

A Deionised Water Aqua 66.50<br />

dermofeel ® PA-3 Sodium Phytate, Aqua Dr. Straetmans 0.10<br />

Glycerol Glycerin 3.00<br />

dermosoft ® 688 ECO Parfum Dr. Straetmans 0.20<br />

dermosoft ® GMCY Glyceryl Caprylate Dr. Straetmans 0.70<br />

B Keltrol RD Xanthan Gum CP Kelco 0.25<br />

Veegum Ultra Magnesium Aluminium Silicate R.T. Vanderbilt 0.50<br />

C dermofeel ® SL Sodium Stearoyl Lactylate Dr. Straetmans 2.00<br />

dermofeel ® PS Polyglyceryl-3-Stearate Dr. Straetmans 3.00<br />

Cegesoft SBE Butyrospermum Parkii (Shea Butter) Cognis 2.00<br />

Cutina GMS Glyceryl Stearate Cognis 3.00<br />

Lanette 16 Cetyl Alcohol Cognis 2.00<br />

Tegesoft DC Decyl Cocoate<br />

Evonik<br />

Goldschmidt<br />

6.00<br />

Miglyol 812 Caprylic/Capric Triglyceride Sasol 5.00<br />

Phytosqualan Squalane NRC/Sophim 3.00<br />

D<br />

dermofeel ® E 74 A<br />

non-GMO<br />

dermofeel ® Toco 70<br />

non-GMO<br />

Parf.Fraicheur Naturelle<br />

(SCCNFP-sensitizer<br />

free up to 1% use-level)<br />

Vitaderm<br />

Tocopheryl Acetate, Helianthus<br />

Annuus (Sunflower) Seed Oil<br />

Tocopherol, Helianthus Annuus<br />

(Sunflower) Seed Oil<br />

Dr. Straetmans 1.00<br />

Dr. Straetmans 0.05<br />

Parfum Symrise 0.20<br />

Alcohol, Aqua, Glycerin, Hydrolyzed<br />

Wheat Protein, Ilex Aquifolium,<br />

Sodium Ursolate, Sodium Oleanoate<br />

Rahn AG 1.50<br />

Citric Acid (sol 20%) Citric Acid q. s.<br />

Manufacturing Procedure:<br />

1. Heat phase A up to 78°C under stirring. Make sure that all components are completely dissolved.<br />

2. Disperse Keltrol and Veegum.<br />

3. Heat phase C to 78°C. Emulsify phase C to phase A/B under stirring.<br />

4. Homogenize for 1-2 min. using an Ultra Turrax. Start to cool down to 32°C under stirring.<br />

5. Add ingredients of phase D and adjust pH if necessary.<br />

Specification Values:<br />

Appearance: White viscous cream.<br />

pH: 5.2 – 5.4.<br />

Viscosity (Brookfield: Helipath TF; Speed 10): Approx. 35.000 mPa . s.<br />

Centrifugation (4.000 rpm, 15 min.): No separation.<br />

Stability: More than 3 months stable at 40°C, 20°C and 4°C.<br />

Microbiological Stability: Proven.<br />

100.00<br />

Disclaimer:<br />

The information contained herein is meant to demonstrate how our products can be used. The given data are suggestions without any<br />

guarantee aimed to support customers’ development. As production conditions at our customers’ facilities are beyond our control we<br />

refuse to accept any liability involved in the use of our products. Please observe possible third party patent rights.<br />

O/W-Emulsions Skin Care Page 7


Claims: Preservative free<br />

<strong>Natural</strong> Caring <strong>Cream</strong><br />

L014-11-1007<br />

Phase Ingredient INCI Supplier %<br />

A Deionised Water Aqua 70.02<br />

Glycerol Glycerin 3.00<br />

dermofeel ® PA-3 Sodium Phytate, Aqua Dr. Straetmans 0.10<br />

dermosoft ® 688 ECO Parfum Dr. Straetmans 0.20<br />

dermosoft ® 700 B Parfum Dr. Straetmans 0.50<br />

A1 Keltrol RD Xanthan Gum CP Kelco 0.10<br />

B Phytocream 2000<br />

C<br />

Potassium Palmitoyl Hydrolyzed<br />

Wheat Protein, Glyceryl<br />

Stearate, Cetearyl Alcohol<br />

Biesterfeld /<br />

Sinerga<br />

dermosoft ® GMCY Glyceryl Caprylate Dr. Straetmans 0.30<br />

Tegosoft DC Decyl Cocoate<br />

Sunflower Seed Oil<br />

Helianthus Annuus (Sunflower)<br />

Seed Oil<br />

Evonik<br />

Goldschmidt<br />

Disclaimer:<br />

The information contained herein is meant to demonstrate how our products can be used. The given data are suggestions without any<br />

guarantee aimed to support customers’ development. As production conditions at our customers’ facilities are beyond our control we<br />

refuse to accept any liability involved in the use of our products. Please observe possible third party patent rights.<br />

Page 8 O/W-Emulsions Skin Care<br />

7.50<br />

2.00<br />

4.00<br />

Lanette O Cetearyl Alcohol Cognis 1.00<br />

Miglyol 812 Caprylic/Capric Triglyceride Sasol 10.00<br />

Aroleat Samphira<br />

dermofeel ® Toco 70<br />

non-GMO<br />

Parf.Rosebud 466721<br />

(SCCNFP-sensitizer free<br />

up to 9% use-level)<br />

Caprylic/Capric Triglyceride,<br />

Hydrogenated Vegetable Oil,<br />

Crithmum Maritimum<br />

Tocopherol, Helianthus Annuus<br />

(Sunflower) Seed Oil<br />

Codif R & N 1.00<br />

Dr. Straetmans 0.05<br />

Parfum Symrise 0.05<br />

100.00<br />

Manufacturing Procedure:<br />

1. Heat phase A up to 78°C under stirring. Make sure that all components are completely dissolved.<br />

Disperse Keltrol.<br />

2. Heat phase B to 78°C. Emulsify phase B to phase A under stirring.<br />

Homogenize for 1-2 min. using an Ultra Turrax.<br />

3. Start to cool down to 32°C under stirring. Add perfume oil and adjust pH if necessary.<br />

Specification Values:<br />

Appearance: White viscous emulsion.<br />

pH: 5.2 – 5.4.<br />

Viscosity (Brookfield: Helipath TF; Speed 10): Approx. 30.000 mPa . s.<br />

Centrifugation (4.000 rpm, 15 min.): No separation.<br />

Stability: Stable for more than 3 months at 20°, 40°and 4°C.<br />

Microbiological stability: Proven.


Claims: Refreshing<br />

Smooth and gentle skin feel<br />

<strong>Natural</strong> Skin Serum<br />

L018-76B-108<br />

Phase Ingredient INCI Supplier %<br />

A Deionised Water Aqua 80.10<br />

Hydrolat Hamamelis Hamamelis Virginiana Flower<br />

Water<br />

Sanoflore 3.00<br />

Glycerol Glycerin 3.00<br />

dermosoft ® GMCY Glyceryl Caprylate Dr. Straetmans 0.50<br />

A1 Amigum Sclerotium Gum Alban Muller 0.20<br />

A2 Amisol Soft Behenyl Alcohol, Glyceryl<br />

Stearate, Lecithin, Glycine<br />

Soja (Soybean) Sterols<br />

B dermofeel ® E 74 A<br />

non-GMO<br />

Tocopheryl Acetate,<br />

Helianthus Annuus (Sunflower)<br />

Seed Oil<br />

Lucas Meyer* 3.00<br />

Dr. Straetmans 0.50<br />

dermofeel ® GSC Glyceryl Stearate Citrate Dr. Straetmans 0.50<br />

Apricot Kernel Oil Prunus Armeniaca Kernel Oil Henry Lamotte 1.00<br />

dermofeel ® MCT Tricaprylin Dr. Straetmans 4.00<br />

C Parfum Baby Cotton 449264<br />

(free of SCCNFP sensitizer)<br />

Parfum Symrise 0.20<br />

D dermosoft ® 1388 ECO Parfum Dr. Straetmans 3.00<br />

E dermofeel ® G 10 LW Polyglyceryl-10 Laurate, Aqua Dr. Straetmans 1.00<br />

Manufacturing Procedure:<br />

1. Heat phase A up to 75 – 80°C under stirring. Disperse Amigel.<br />

2. Add Amisol Soft and keep at 75 – 80°C under stirring for approx. 20 min. (hydration step).<br />

3. Heat phase B up to 75°C and add to batch under stirring. Mix slowly during 5 min.<br />

(emulsification step).<br />

4. Homogenize for approx. 2 min. using an Ultra-Turrax (homogenization step).<br />

5. Cool down under medium stirring and add C, D and E below 40°C. Adjust pH if necessary.<br />

Specification Values:<br />

Appearance: Soft sprayable lotion.<br />

pH: 5.2 – 5.4 .<br />

Viscosity (Brookfield: LV 4; 10 rpm): Approx. 4.000 – 6.000 mPa . s.<br />

Centrifugation (4.000 rpm, 20 min.): No separation.<br />

Stability: Stable for more than 3 months at 40°C, 20°C and 4°C.<br />

Microbiological stability: Proven.<br />

100.00<br />

* distributed<br />

in Germany by<br />

Dr. Straetmans GmbH<br />

Disclaimer:<br />

The information contained herein is meant to demonstrate how our products can be used. The given data are suggestions without any<br />

guarantee aimed to support customers’ development. As production conditions at our customers’ facilities are beyond our control we<br />

refuse to accept any liability involved in the use of our products. Please observe possible third party patent rights.<br />

O/W-Emulsions Skin Care Page 9


Claims: Preservative free<br />

Smooth skin feel<br />

<strong>Natural</strong> Body <strong>Cream</strong><br />

L016-44-1007<br />

Phase Ingredient INCI Supplier %<br />

A Deionised Water Aqua 69.50<br />

dermofeel ® PA-3 Sodium Phytate, Aqua Dr. Straetmans 0.20<br />

Glycerol Glycerin 7.00<br />

dermosoft ® GMCY Glyceryl Caprylate Dr. Straetmans 0.50<br />

dermosoft ® 700 B Parfum Dr. Straetmans 0.30<br />

dermosoft ® 688 ECO Parfum Dr. Straetmans 0.20<br />

A1 Keltrol RD Xanthan Gum CP Kelco 0.25<br />

B dermofeel ® SL Sodium Stearoyl Lactylate Dr. Straetmans 1.00<br />

dermofeel ® PS Polyglyceryl-3 Stearate Dr. Straetmans 3.00<br />

Cutina FS 45 Stearic Acid, Palmitic Acid Cognis 3.00<br />

Lanette O Cetearyl Alcohol Cognis 2.00<br />

Sun Flower Seed Oil<br />

dermofeel ® Toco 70<br />

non-GMO<br />

Helianthus Annuus (Sunflower)<br />

Seed Oil<br />

Tocopherol, Helianthus Annuus<br />

(Sunflower) Seed Oil<br />

Dr. Straetmans<br />

dermofeel ® TC-7 Triheptanoin Dr. Straetmans 6.00<br />

C Citric Acid (sol 20%) Citric Acid Merck q. s.<br />

Manufacturing Procedure:<br />

1. Heat phase A up to 78°C under stirring until dermosoft ® 688 ECO is<br />

completely dissolved. Disperse Keltrol.<br />

2. Heat phase B to 78°C. Emulsify phase B into phase A under stirring.<br />

3. Homogenize for 1-2 min. using an Ultra Turrax.<br />

4. Start to cool down to 30°C under stirring. Adjust pH value.<br />

Specification Values:<br />

Appearance: White cream.<br />

pH: 5.2 – 5.4.<br />

Viscosity (Brookfield: Helipath TF; Speed 10, 23°C): Approx. 30.000 mPas.<br />

Centrifugation (4.000 rpm, 15 min): No separation.<br />

Stability: More than 3 months stable at 20°C, 40°C and 4°C.<br />

Microbiological Stability: Proven.<br />

Disclaimer:<br />

The information contained herein is meant to demonstrate how our products can be used. The given data are suggestions without any<br />

guarantee aimed to support customers’ development. As production conditions at our customers’ facilities are beyond our control we<br />

refuse to accept any liability involved in the use of our products. Please observe possible third party patent rights.<br />

Page 10 O/W-Emulsions Skin Care<br />

7.00<br />

0.05<br />

100.00


Claims: Milky sprayable liquid<br />

Preservative free<br />

<strong>Natural</strong> Body Spray<br />

L018-66-1107<br />

Phase Ingredient INCI Supplier %<br />

A Deionised Water Aqua 70.90<br />

Glycerol Glycerin 5.00<br />

dermosoft ® 1388 ECO Parfum Dr. Straetmans 3.50<br />

dermofeel ® G 10 LW<br />

Polyglyceryl-10 Laurate,<br />

Aqua<br />

Dr. Straetmans 2.00<br />

A1 Amaze XT Dehydroxanthan Gum National Starch 0.20<br />

B dermofeel ® GSC Glyceryl Stearate Citrate Dr. Straetmans 2.00<br />

C<br />

dermofeel ® MCT Tricaprylin Dr. Straetmans 8.00<br />

Sunflower Seed Oil<br />

dermofeel ® Toco 70<br />

non-GMO<br />

Parf. Baby Cotton<br />

449264 (free of SCCNFP<br />

sensitizer)<br />

Helianthus Annuus<br />

(Sunflower) Seed Oil<br />

Tocopherol, Helianthus<br />

Annuus (Sunflower) Seed Oil<br />

Disclaimer:<br />

The information contained herein is meant to demonstrate how our products can be used. The given data are suggestions without any<br />

guarantee aimed to support customers’ development. As production conditions at our customers’ facilities are beyond our control we<br />

refuse to accept any liability involved in the use of our products. Please observe possible third party patent rights.<br />

O/W-Emulsions Skin Care Page 11<br />

8.00<br />

Dr. Straetmans 0.10<br />

Parfum Symrise 0.30<br />

Manufacturing Procedure:<br />

1. Heat phase A up to 78°C under stirring. Disperse Amaze XT.<br />

2. Heat phase B up to 78°C. Emulsify phase B into phase A under stirring.<br />

3. Homogenize for 1 – 2 min. using an Ultra Turrax.<br />

4. Start to cool down under medium stirring.<br />

5. Add perfume below 40°C and adjust pH to 5.2 – 5.4.<br />

Specification Values:<br />

Appearance: Thin, white lotion.<br />

pH: 5.2 – 5.4.<br />

Viscosity (Brookfield: LV 4; 10 rpm): Approx. 1000 mPa . s.<br />

Centrifugation (5000upm, 2900RZB, 10min.): No separation.<br />

Stability: More than 3 months stable at 20°C, 40 °C and 4°C.<br />

Microbiological stability: Proven.<br />

100.00<br />

* distributed<br />

in Germany by<br />

Dr. Straetmans GmbH


Claims: Preservative free<br />

Light skin feel<br />

<strong>Natural</strong> Moisture <strong>Cream</strong><br />

D009-03-707<br />

Phase Ingredient INCI Supplier %<br />

A Deionised Water Aqua 74.15<br />

dermofeel ® PA-3 Sodium Phytate, Aqua Dr .Straetmans 0.10<br />

Glycerol Glycerin 3.00<br />

dermosoft ® GMCY Glyceryl Caprylate Dr. Straetmans 0.70<br />

dermosoft ® 688 ECO Parfum Dr. Straetmans 0.20<br />

A1 Keltrol RD Xanthan Gum CP Kelco 0.20<br />

LaraCare A-200 Galactoarabinan Larex 0.50<br />

B dermofeel ® GSC Glyceryl Stearate Citrate Dr. Straetmans 3.50<br />

C<br />

Tegosoft DC Decyl Cocoate<br />

Evonik<br />

Goldschmidt<br />

Disclaimer:<br />

The information contained herein is meant to demonstrate how our products can be used. The given data are suggestions without any<br />

guarantee aimed to support customers’ development. As production conditions at our customers’ facilities are beyond our control we<br />

refuse to accept any liability involved in the use of our products. Please observe possible third party patent rights.<br />

Page 12 O/W-Emulsions Skin Care<br />

3.00<br />

Olive Oil Olea Europaea (Olive) Fruit Oil 2.00<br />

Phytosqualan Squalane NRC / Sophim 6.00<br />

Lanette O Cetearyl Alcohol Cognis 2.00<br />

Miglyol 812 Caprylic/Capric Triglyceride Sasol 4.00<br />

dermofeel ® Toco 70<br />

non-GMO<br />

Tocopherol, Helianthus Annuus<br />

(Sunflower) Seed Oil<br />

Frag. Highlight Natura Öko Parfum, Coumarin, Geraniol,<br />

Linalool, Citronellol, Limonen<br />

Dr. Straetmans<br />

Düllberg<br />

Konzentra<br />

Sodium Hydroxide (sol. 10%) Sodium Hydroxide q.s.<br />

Manufacturing Procedure:<br />

1. Heat phase A up to 78°C under stirring until dermosoft ® 688 ECO<br />

is completely dissolved. Disperse Keltrol and LaraCare.<br />

2. Heat phase B up to 78°C. Emulsify phase B in phase A under stirring.<br />

3. Homogenize for 1-2 min. using an Ultra Turrax.<br />

4. Start to cool down to 30°C under stirring.<br />

5. Add Parfum below 40°C and adjust pH value to 5.2 – 5.4.<br />

Specification Values:<br />

Appearance: Soft off-white emulsion.<br />

pH: 5.2 – 5.4.<br />

Viscosity (Brookfield: Helipath TF; Speed 10): Approx. 20.000 mPas.<br />

Centrifugation (15 min., 4.000 rpm): No separation.<br />

Stability: More than 3 months stable at 20°C, 40°C and 4°C.<br />

Microbiological Stability: Proven.<br />

0.15<br />

0.50<br />

100.00


Claims: Anti aging<br />

Preservative free<br />

Regenerating Hand <strong>Cream</strong> ECO<br />

6.013.01<br />

Phase Ingredient INCI Supplier %<br />

A Deionised Water Aqua 54.65<br />

dermofeel ® PA-3 Sodium Phytate, Aqua Dr. Straetmans 0.10<br />

Satiaxane CX 91 Xanthan Gum Evonik<br />

Goldschmidt<br />

Disclaimer:<br />

The information contained herein is meant to demonstrate how our products can be used. The given data are suggestions without any<br />

guarantee aimed to support customers’ development. As production conditions at our customers’ facilities are beyond our control we<br />

refuse to accept any liability involved in the use of our products. Please observe possible third party patent rights.<br />

O/W-Emulsions Skin Care Page 13<br />

0.30<br />

Glycerol Glycerin 8.00<br />

dermosoft ® 747 Parfum Dr. Straetmans 0.20<br />

dermosoft ® GMCY Glyceryl Caprylate Dr. Straetmans 0.70<br />

Biophilic H Hydrogenated Lecithin, C12–16<br />

Alcohols, Palmitic Acid<br />

Lucas Meyer* 5.00<br />

B Cera Alba Cera Alba Bärlocher 2.00<br />

Shea Butter Butyrospermum Parkii (Shea<br />

Butter)<br />

Gustav Heess 6.00<br />

Sweet Almond Oil Prunus Amygdalus Dulcis<br />

(Sweet Almond) Oil<br />

Goerlich 5.00<br />

Oil Rose Tree Muskatel Rosa Canina Fruit Oil Goerlich 5.00<br />

dermofeel ® Toco 70 Tocopherol, Helianthus Annuus Dr. Straetmans 0.30<br />

non-GMO<br />

(Sunflower) Seed Oil<br />

C Deionised Water Aqua 2.50<br />

Mamaku VE Nature See TDS Lucas Meyer* 2.00<br />

Riboxyl Ribose Lucas Meyer* 1.00<br />

D Kaolin Kaolin 5.00<br />

E Alcohol Alcohol 2.00<br />

F Frag. Reves Exotiques 3946/3 Parfum Vanessence 0.25<br />

Sodium Hydroxide (sol 10%) Sodium Hydroxide Merck q. s.<br />

100.00<br />

Manufacturing Procedure:<br />

1. Heat separately A and B up to 75 – 80°C under slow mixing.<br />

2. Keep A at 75 – 80°C under slow mixing during approx. 20 min (Hydration Step!)<br />

3. Add B in A and mix slowly during 5 min (Emulsification step!).<br />

4. Homogenize for 2 min. using an Ultra-Turrax.<br />

5. Cool down under medium stirring. Add premix of phase C, and components D, E, and F below 40°C.<br />

Adjust pH if necessary.<br />

Specification Values:<br />

Appearance: Thick and bright emulsion.<br />

pH: 5.0 – 5.5.<br />

Viscosity (Brookfield: LV6; Speed 10): Approx. 30.000 mPa . s.<br />

Centrifugation (4.000upm, 20min.): No separation.<br />

* distributed<br />

in Germany by<br />

Dr. Straetmans GmbH


Claims: Soft skin feel<br />

Anti-aging effect<br />

Energizing Soft Serum ECO<br />

6.123.02<br />

Phase Ingredient INCI Supplier %<br />

A Deionised Water Aqua 75.25<br />

Orange Blossom Water Citrus Aurantium Amara Flower<br />

Distillate<br />

Sanoflore 15.00<br />

dermofeel ® PA-3 Sodium Phytate, Aqua Dr. Straetmans 0.05<br />

dermosoft ® GMCY Glyceryl Caprylate Dr. Straetmans 0.70<br />

Glycerol Glycerin 3.00<br />

A1 Satiaxane CX 91 Xanthan Gum Evonik<br />

Goldschmidt<br />

A2 Amisol Soft Behenyl Alcohol, Glyceryl<br />

Stearate, Lecithin, Glycine Soja<br />

(Soybean) Sterols<br />

B Liftessence Nature Water, Glycerin, Cyathea<br />

Cumingii Leaf Extract<br />

Disclaimer:<br />

The information contained herein is meant to demonstrate how our products can be used. The given data are suggestions without any<br />

guarantee aimed to support customers’ development. As production conditions at our customers’ facilities are beyond our control we<br />

refuse to accept any liability involved in the use of our products. Please observe possible third party patent rights.<br />

Page 14 O/W-Emulsions Skin Care<br />

0.20<br />

Lucas Meyer* 3.00<br />

Lucas Meyer* 2.00<br />

C Riboxyl Ribose Lucas Meyer* 0.50<br />

D Potassium Sorbate Potassium Sorbate Merck 0.30<br />

Manufacturing Procedure:<br />

1. Heat phase A up to 75 °C and disperse Satiaxane CX 91 under stirring.<br />

2. Add Amisol Soft and maintain temperature at 75°C for approx. 20 min.<br />

3. Homogenize for approx. 3 min. using an Ultra-Turrax.<br />

4. Cool down under medium stirring.<br />

5. Add phase B, C and D below 40°C.<br />

6. Adjust pH if necessary.<br />

Specification Values:<br />

Appearance: Off-white lotion.<br />

pH: 5.5 – 6.0.<br />

Viscosity (Brookfield: LV 4; 10 rpm): Approx. 2.500 – 5.000 mPa . s.<br />

Centrifugation (4.000 rpm, 20 min.): No separation.<br />

100.00<br />

* distributed<br />

in Germany by<br />

Dr. Straetmans GmbH


Claims: Velvety rich skin feel<br />

Sublim Mango <strong>Cream</strong> ECO<br />

6.135.01<br />

Phase Ingredient INCI Supplier %<br />

A Orange Blossom Water<br />

Citrus Aurantium Amara<br />

Flower Distillate<br />

Sanoflore 15.00<br />

Deionised Water Aqua 44.25<br />

dermofeel ® PA-3 Sodium Phytate, Aqua Dr. Straetmans 0.05<br />

Glycerol Glycerin 3.00<br />

dermosoft ® 700 B Parfum Dr. Straetmans 0.75<br />

dermosoft ® 688 ECO Parfum Dr. Straetmans 0.15<br />

A1 Satiaxane CX 91 Xanthan Gum<br />

Evonik<br />

Goldschmidt<br />

A2 Biophilic H<br />

Hydrogenated Lecithin, C12–<br />

16 Alcohols, Palmitic Acid<br />

Lucas Meyer* 4.00<br />

B Cocoa Butter<br />

Theobroma Cacao (Cocoa)<br />

Seed Butter<br />

Gustav Heess 15.00<br />

dermofeel ® GSC Glyceryl Stearate Citrate Dr. Straetmans 1.00<br />

dermofeel ® Toco 70<br />

non-GMO<br />

Tocopherol, Helianthus<br />

Annuus (Sunflower) Seed Oil<br />

Disclaimer:<br />

The information contained herein is meant to demonstrate how our products can be used. The given data are suggestions without any<br />

guarantee aimed to support customers’ development. As production conditions at our customers’ facilities are beyond our control we<br />

refuse to accept any liability involved in the use of our products. Please observe possible third party patent rights.<br />

O/W-Emulsions Skin Care Page 15<br />

0.30<br />

Dr. Straetmans 0.50<br />

Annato Oil Bixa Orellana Seed Oil Rain Forest 2.00<br />

Safflower Oil<br />

Carthamus Tinctorius<br />

(Safflower) Seed Oil<br />

Henry Lamotte 4.00<br />

Lanette 22 Behenyl Alcohol Cognis 4.00<br />

C Suprem Mangue Nature See TDS<br />

Betaine, Aqua, Glycerin,<br />

Lucas Meyer* 2.00<br />

Hydraporine Nature Hydrogenated Lecithin,<br />

Honey, Pectin<br />

Lucas Meyer* 4.00<br />

100.00<br />

Manufacturing Procedure:<br />

1. Heat separately A and B up to 75 – 80°C under slow mixing. Disperse Satiaxane CX 91.<br />

2. Add Biophilic. Keep A at 75 – 80°C under slow mixing during approx. 20 min (hydration step!)<br />

3. Add phase B to phase A under slow mixing. Mix slowly during 5 min (emulsification step!)<br />

4. Homogenize for 2 min. using an Ultra-Turrax.<br />

5. Cool down under medium stirring. Add components of phase C below 40°C.<br />

6. Adjust pH if necessary.<br />

Specification Values:<br />

Appearance: Thick, bright yellow cream.<br />

pH: 5.0 – 5.5.<br />

Viscosity (Brookfield: LV 6; Speed 10): > 60.000 mPa . s.<br />

Centrifugation (4.000 rpm, 20 min.): No separation.<br />

Stability: Stable for more than 3 months at 40°C, 20°C and 4°C.<br />

* distributed<br />

in Germany by<br />

Dr. Straetmans GmbH


Claims: Refreshing<br />

Rich afterfeel<br />

<strong>Natural</strong> Skin Fluid<br />

19-32-02-307<br />

Phase Ingredient INCI Supplier %<br />

A Deionised Water Aqua 83.45<br />

Rose Flower Water Rosa Centifolia Flower Water Sanoflore 3.00<br />

Potassium Sorbate Potassium Sorbate 0.15<br />

Glycerol Glycerin 3.00<br />

dermosoft ® GMCY Glyceryl Caprylate Dr. Straetmans 1.00<br />

A1 Amigum Sclerotium Gum Alban Muller 0.20<br />

A2 Biophilic H Hydrogenated Lecithin, C12-16<br />

Alcohols, Palmitic Acid<br />

Lucas Meyer* 3.00<br />

B dermofeel ® GSC Glyceryl Stearate Citrate Dr. Straetmans 0.50<br />

dermofeel ® E 74 A<br />

non-GMO<br />

Tocopheryl Acetate, Helianthus<br />

Annuus (Sunflower) Seed Oil<br />

Dr. Straetmans 0.50<br />

Apricot Kernel Oil Prunus Armeniaca Kernel Oil Henry Lamotte 1.00<br />

dermofeel ® MCT Tricaprylin Dr. Straetmans 4.00<br />

C Parfum Baby Cotton<br />

449264 (free of SCCNFP<br />

sensitizer)<br />

Parfum Symrise 0.20<br />

100.00<br />

Manufacturing Procedure:<br />

1. Heat phase A up to 75 °C under stirring and disperse Amigum.<br />

2. Add Biophilic and keep phase A at 75°C – 80°C under slow stirring during 20 min. (hydration step).<br />

3. Heat phase B up to 75°C and add to the batch. Stir slowly during 5 min. (emulsification step).<br />

4. Homogenize for approx. 2 min. using an Ultra-Turrax.<br />

5.. Cool down under medium stirring. Add perfume below 40°C.<br />

4. Adjust pH if necessary.<br />

Specification Values:<br />

Appearance: White Lotion.<br />

pH: 5.4 – 5.6.<br />

Viscosity (Brookfield: LV 4; 10 rpm): Approx. 4.000 – 6.000 mPa . s.<br />

Centrifugation (4.000 rpm, 20 min.): No separation.<br />

Stability: Stable for more than 3 months at 40°C, 20°C and 4°C.<br />

Microbiological Stability: Proven.<br />

* distributed<br />

in Germany by<br />

Dr. Straetmans GmbH<br />

Disclaimer:<br />

The information contained herein is meant to demonstrate how our products can be used. The given data are suggestions without any<br />

guarantee aimed to support customers’ development. As production conditions at our customers’ facilities are beyond our control we<br />

refuse to accept any liability involved in the use of our products. Please observe possible third party patent rights.<br />

Page 16 O/W-Emulsions Skin Care


Claims: Preservative free<br />

Light skin feel<br />

With natural tan activator<br />

Pre Tan Body Lotion Eco<br />

L008-62-1107<br />

Phase Ingredient INCI Supplier %<br />

A Deionised Water Aqua 53.55<br />

Rose Flower Water Rosa Centifolia Flower Water Sanoflore 15.00<br />

Glycerol Glycerin 5.00<br />

dermosoft ® GMCY Glyceryl Caprylate Dr. Straetmans 0.30<br />

dermosoft ® 700 B Parfum Dr. Straetmans 0.70<br />

dermosoft ® 688 ECO Parfum Dr. Straetmans 0.20<br />

A1 Keltrol RD Xanthan Gum Kelco 0.25<br />

B dermofeel ® GSC Glyceryl Stearate Citrate Dr. Straetmans 2.50<br />

Cocoa Butter Theobroma Cacao ( Cocoa) Seed Butter Gustav Heess 3.00<br />

dermofeel ® TC-7 Triheptanoin Dr. Straetmans 6.00<br />

Phytosqualan Squalane NRC / Sophim 3.00<br />

Lanette O Cetearyl Alcohol Cognis 1.50<br />

dermofeel ® E 74 A<br />

dermofeel ® Toco 70<br />

non-GMO<br />

Tocopheryl Acetate, Helianthus Annuus<br />

(Sunflower) Seed Oil<br />

Tocopherol, Helianthus Annuus<br />

(Sunflower) Seed Oil<br />

Dr. Straetmans 1.00<br />

Dr. Straetmans 0.20<br />

C Suprem Active Cocoa See TDS Lucas Meyer* 2.00<br />

D Deionised Water Aqua 5.00<br />

Melactiva<br />

Mucuna Pruriens Seed Extract,<br />

Maltodextrin<br />

Lucas Meyer* 0.50<br />

Ascorbic Acid Ascorbic Acid 0.10<br />

E Frag. Vanille 3043/35 Parfum Vanessence 0.30<br />

Manufacturing Procedure:<br />

1. Heat phase A up to 78°C until dermosoft ® 688 ECO is completely dissolved. Disperse Keltrol.<br />

2. Heat phase B up to 78°C.<br />

3. Emulsify phase B into phase A under stirring. Homogenize for 1-2 min. using an Ultra Turrax.<br />

4. Start to cool down under medium stirring.<br />

5. Add C, pre-solution of phase D and E below 40°C and cool down to 30°C under stirring.<br />

Adjust pH value if necessary.<br />

Specification Values:<br />

Appearance: Soft light brown emulsion.<br />

pH: 5.2 – 5.4.<br />

Viscosity (Brookfield: Helipath TF; Speed 10): 10.000 - 20.000 mPas.<br />

Centrifugation (15 min., 4.000 rpm): No separation.<br />

Stability: More than 3 months stable at 20°C, 40°C and 4°C.<br />

Microbiological Stability: Proven.<br />

100.00<br />

* distributed<br />

in Germany by<br />

Dr. Straetmans GmbH<br />

Disclaimer:<br />

The information contained herein is meant to demonstrate how our products can be used. The given data are suggestions without any<br />

guarantee aimed to support customers’ development. As production conditions at our customers’ facilities are beyond our control we<br />

refuse to accept any liability involved in the use of our products. Please observe possible third party patent rights.<br />

O/W-Emulsions Skin Care Page 17


Claims: Preservative free<br />

<strong>Natural</strong> Moisture Balm<br />

51-09-1208<br />

Phase Ingredient INCI Supplier %<br />

A Deionised Water Aqua 71.45<br />

A1 Glycerol Glycerin 2.50<br />

LaraCare A200 Galactoarabinan Larex 1.00<br />

Keltrol SFT Xanthan Gum CP Kelco 0.30<br />

dermofeel ® PA-3 Sodium Phytate, Aqua Dr. Straetmans 0.10<br />

A2 dermosoft ® 1388 ECO Parfum Dr. Straetmans 3.00<br />

dermosoft ® GMCY Glyceryl Caprylate Dr. Straetmans 0.30<br />

B dermofeel ® PS Polyglyceryl-3 Stearate Dr. Straetmans 2.00<br />

dermofeel ® SL Sodium Stearoyl Lactylate Dr. Straetmans 2.00<br />

dermofeel ® TC-7 Triheptanoin Dr. Straetmans 7.00<br />

Jojoba Oil<br />

dermofeel ® Toco 70<br />

C Mandarin Oil<br />

Simmondsia Chinensis (Jojoba)<br />

Seed Oil<br />

Tocopherol, Helianthus Annuus<br />

(Sunflower) Seed Oil<br />

Henry Lamotte 6.00<br />

Dr. Straetmans 0.05<br />

Tegosoft DC Decyl Cocoate Evonik 4.00<br />

Citrus Nobilis (Mandarin Orange)<br />

Peel Oil<br />

Primavera 0.30<br />

D Citric Acid (sol 20%) Citric Acid Merck q. s.<br />

Manufacturing Procedure:<br />

1. Dissolve premix of A1 in water and heat up to 75°C. Dissolve ingredients of A2.<br />

2. Heat phase B up to 75°C.<br />

3. Emulsify phase B to phase A under stirring and homogenizing.<br />

4. Cool down below 40°C and add phase C.<br />

5. Adjust pH-value to 5.0 -5.5. Cool further down to room-temperature.<br />

Specification Values:<br />

Appearance: White emulsion.<br />

pH: 5.0 – 5.5.<br />

Viscosity (Brookfield: Spindle 6; Speed 10): Approx. 10.000 mPa . s.<br />

Centrifugation (5.000 rpm, 2.900 RZB, 10 min.): No separation.<br />

Stability: More than 3 months stable at 20°C, 40°C and 4°C.<br />

Microbiological Stability: Proven.<br />

100.00<br />

Disclaimer:<br />

The information contained herein is meant to demonstrate how our products can be used. The given data are suggestions without any<br />

guarantee aimed to support customers’ development. As production conditions at our customers’ facilities are beyond our control we<br />

refuse to accept any liability involved in the use of our products. Please observe possible third party patent rights.<br />

Page 18 O/W-Emulsions Skin Care


<strong>Natural</strong> <strong>Deo</strong> <strong>Cream</strong><br />

98-11-309<br />

Claims: Soft and elegant skin feel with quick absorption<br />

Preservative free<br />

dermosoft soft ® GMCY as deo active<br />

Phase Ingredient INCI Supplier %<br />

A Deionised Water Aqua 72.05<br />

A1 Naviance Instant Maize Zea Mays (Corn) Starch National Starch 2.00<br />

A2 Keltrol CG-SFT Xanthan Gum CP Kelco 0.30<br />

A3 dermosoft ® 688 ECO Parfum Dr. Straetmans 0.15<br />

dermosoft ® GMCY Glyceryl Caprylate Dr. Straetmans 0.80<br />

B dermofeel ® GSC Glyceryl Stearate Citrate Dr. Straetmans 3.00<br />

Tego <strong>Deo</strong> PY 88 Pellets Zinc Ricinoleate Evonik 2.00<br />

dermofeel ® sensolv Isoamyl Laurate Dr. Straetmans 6.00<br />

Lanette O Cetearyl Alcohol Cognis 4.00<br />

Hydagen CAT Triethyl Citrate Cognis 2.00<br />

C Glycerin Glycerin 3.00<br />

Talc Talc<br />

Creations<br />

Couleur<br />

Disclaimer:<br />

The information contained herein is meant to demonstrate how our products can be used. The given data are suggestions without any<br />

guarantee aimed to support customers’ development. As production conditions at our customers’ facilities are beyond our control we<br />

refuse to accept any liability involved in the use of our products. Please observe possible third party patent rights.<br />

O/W-Emulsions Skin Care Page 19<br />

2.00<br />

Deionised Water Aqua 1.00<br />

D Parf. Highlight Natura Öko Parfum Düllberg 0.20<br />

E Citric Acid (sol.20%) Citric Acid 1.50<br />

100.00<br />

Manufacturing Procedure :<br />

1. Dissolve A1 in water under stirring and heat up to 80°C.<br />

2. Add and dissolve A2 while stirring. In a separate beaker melt dermosoft ® GMCY at 40° and add<br />

dermosoft ® 688 ECO to prepare a pre-slurry.<br />

3. Add and dissolve A3 to A while stirring.<br />

4. Heat phase B up to 85°C. Emulsify phase B to phase A while stirring. Homogenize for 1-2 min. using<br />

an Ultra Turrax.<br />

5. Cool down to 40°C and add C and D.<br />

6. Cool further down to room-temperature and adjust pH if necessary.<br />

Specification Values:<br />

Appearance: White emulsion.<br />

pH-value: 4.0 – 5.0.<br />

Viscosity (Brookfield: Spindle 6; Speed 10): Approx. 25000 mPa . s.<br />

Stability: More than 3 months stable at 20°C, 40°C and 4°C.<br />

Microbiological Stability: Proven.


<strong>Natural</strong> Firming Body Lotion<br />

L008-67-109<br />

Claims: Preservative free<br />

Light and elegant skin feel<br />

With natural remodelling agent from linseeds<br />

Phase Ingredient INCI Supplier %<br />

A Deionised Water Aqua 70.95<br />

Glycerol Glycerin 5.00<br />

dermofeel ® PA-3 Sodium Phytate Dr. Straetmans 0.10<br />

dermosoft ® SLL Sodium Lauroyl Lactylate Dr. Straetmans 0.30<br />

dermosoft ® 700 B Parfum Dr. Straetmans 0.70<br />

dermosoft ® 688 ECO Parfum Dr. Straetmans 0.20<br />

A1 Keltrol RD Xanthan Gum CP Kelco 0.25<br />

B dermofeel ® GSC Glyceryl Stearate Citrate Dr. Straetmans 2.50<br />

Cegesoft SBE Butyrospermum Parkii (Shea Butter) Cognis 3.00<br />

dermofeel ® sensolv Isoamyl Laurate Dr. Straetmans 6.00<br />

Phytosqualan Squalane Sophim 3.00<br />

Lanette O Cetearyl Alcohol Cognis 1.50<br />

dermofeel ® E 74 A<br />

non-GMO<br />

dermofeel ® Toco 70<br />

non-GMO<br />

C Mamaku Vital Nature PF<br />

D Sculptessence<br />

E<br />

Frag. Vanilla/Lavend/Ylang<br />

P0126087<br />

Tocopherol Acetate, Helianthus<br />

Annuus (Sunflower) Seed Oil<br />

Tocopherol, Helianthus Annuus<br />

(Sunflower) Seed Oil<br />

Aqua, Cyathea Medullaris Leaf<br />

Extract<br />

Aqua, Glycerin, Linum Usitatissimum<br />

Extract<br />

Dr. Straetmans 1,00<br />

Dr. Straetmans 0.20<br />

Lucas Meyer* 2.00<br />

Lucas Meyer* 3.00<br />

Parfum Frey&Lau 0.50<br />

Citrric Acid (sol 20%) Citric Acid q.s.<br />

100.00<br />

Manufacturing Procedure:<br />

1. Heat phase A up to 78°C until dermosoft ® 688 ECO is completely dissolved. Disperse Keltrol.<br />

2. Heat phase B up to 78°C.<br />

3. Emulsify phase B into phase A under stirring. Homogenize for 1-2 min. using an Ultra Turrax.<br />

4. Start to cool down under medium stirring.<br />

5. Add C, D and E below 40°C and cool down to 30°C under stirring. Adjust pH value if necessary.<br />

Specification Values:<br />

Appearance: Soft white emulsion. pH: 5.2 – 5.4.<br />

Viscosity (Brookfield: Helipath TF; Speed 10): 10.000 - 20.000 mPas.<br />

Centrifugation (15 min., 4.000 rpm): No separation.<br />

Stability: More than 3 months stable at 20°C, 40°C and 4°C.<br />

Microbiological Stability: Proven.<br />

* distributed<br />

in Germany by<br />

Dr. Straetmans GmbH<br />

Disclaimer:<br />

The information contained herein is meant to demonstrate how our products can be used. The given data are suggestions without any<br />

guarantee aimed to support customers’ development. As production conditions at our customers’ facilities are beyond our control we<br />

refuse to accept any liability involved in the use of our products. Please observe possible third party patent rights.<br />

Page 20 O/W-Emulsions Skin Care


Claims: Preservative free<br />

Anti-stress and anti-aging effect<br />

Anti-Stress Eco <strong>Cream</strong><br />

L035-16.1F-209<br />

Phase Ingredient INCI Supplier %<br />

A Deionised Water Aqua 61.45<br />

Glycerol Glycerin 3.00<br />

dermofeel ® PA-3 Sodium Phytate, Aqua Dr. Straetmans 0.10<br />

dermosoft ® 1388 ECO Parfum Dr. Straetmans 3.00<br />

A1 LaraCare A200 Glactorrabinan Larex 0.50<br />

Keltrol RD Xanthan Gum CP Kelco 0.30<br />

B symbio ® muls GC<br />

Glyceryl Stearate Citrate, Cetearyl<br />

Alcohol, Glyceryl Caprylate<br />

Dr. Straetmans 5.00<br />

Cetiol SB 45 Butyrospermum Parkii (Shea Butter) Cognis 2.00<br />

Cocoa Butter Theobroma Cocao(Cocoa) Seed Butter Gustav Heess 1.00<br />

dermofeel ® sensolv Isoamyl Laurate Dr. Straetmans 3.00<br />

Tegosoft DC Decyl Cocoate Evonik 4.00<br />

Phytosqualan Squalane Sophim 5.00<br />

Olive Oil extra virgin Olea Europaea (Olive) Fruit Oil Rovi 2.00<br />

dermofeel ® E 74 A<br />

dermofeel ® Toco 70<br />

non-GMO<br />

Tocopheryl Acetate, Helianthus<br />

Annuus (Sunflower) Seed Oil<br />

Tocopherol, Helianthus Annuus<br />

(Sunflower) Seed Oil<br />

Dr. Straetmans 1.00<br />

Dr. Straetmans 0.15<br />

C Suprem Nature Grenade See TDS Lucas Meyer* 2.00<br />

Liftessence Nature PF See TDS Lucas Meyer* 2.00<br />

D Ryboxyl Ribose Lucas Meyer* 1.00<br />

Deionised Water Aqua 3.00<br />

E Nature Parf. Soft Flower Parfum Frey&Lau 0.50<br />

Citric Acid (20%ig) Citric Acid Merck q.s.<br />

Manufacturing Procedure:<br />

1. Heat Phase A up to 78°C and disperse Keltrol and LaraCare. Heat phase B up to 78°C.<br />

2. Emulsify phase B into phase A under stirring. Homogenize for 1-2 min. using an Ultra Turrax.<br />

3. Start to cool down under medium stirring.<br />

4. Add C, D and E below 40°C and cool down to 30°C under stirring. Adjust pH value if necessary.<br />

Specification Values:<br />

Appearance: Soft light brown emulsion.<br />

pH: 5.2 – 5.5.<br />

Viscosity (Brookfield: Helipath TF; Speed 10): 20.000 - 30.000 mPas.<br />

Centrifugation (15 min., 4.000 rpm): No separation.<br />

Stability: More than 3 months stable at 20°C, 40°C and 4°C.<br />

100.00<br />

* distributed<br />

in Germany by<br />

Dr. Straetmans GmbH<br />

Disclaimer:<br />

The information contained herein is meant to demonstrate how our products can be used. The given data are suggestions without any<br />

guarantee aimed to support customers’ development. As production conditions at our customers’ facilities are beyond our control we<br />

refuse to accept any liability involved in the use of our products. Please observe possible third party patent rights.<br />

O/W-Emulsions Skin Care Page 21


<strong>Natural</strong> Sport Aqua Body Lotion<br />

L035-16.2D1-209<br />

Claims: Preservative free<br />

Light skin feel<br />

Emulsify at low temperature<br />

Phase Ingredient INCI Supplier %<br />

A Deionised Water Aqua 61.25<br />

Glycerol Glycerin 5.00<br />

dermofeel ® PA-3 Sodium Phytate, Aqua Dr. Straetmans 0.10<br />

dermosoft ® 1388 ECO Parfum Dr. Straetmans 3.00<br />

A1 Keltrol RD Xanthan Gum CP Kelco 0.20<br />

B symbio ® muls GC<br />

Glyceryl Stearate Citrate, Cetearyl<br />

Alcohol, Glyceryl Caprylate<br />

Dr. Straetmans 4.00<br />

B1 Apricot Kernel Oil Prunus Armeniaca (Apricot) Kernel Oil Gustav Heess 2.00<br />

Jojoba Oil<br />

Simmondsia Chinensis (Jojoba) Seed<br />

Oil<br />

Gustav Heess 1.00<br />

dermofeel ® sensolv Isoamyl Laurate Dr. Straetmans 4.00<br />

Phytosqualan Squalane Sophim 3.00<br />

dermofeel ® E 74 A<br />

dermofeel ® Toco 70<br />

non-GMO<br />

C Hydraporine Nature<br />

Tocopheryl Acetate, Helianthus<br />

Annuus (Sunflower) Seed Oil<br />

Tocopherol, Helianthus Annuus<br />

(Sunflower) Seed Oil<br />

Betaine, Water, Glycerin,<br />

Hydrogenated Lecithin, Honey, Pectin<br />

Dr. Straetmans 1.00<br />

Dr. Straetmans 0.15<br />

Lucas Meyer* 5.00<br />

Deionised Water Aqua 10.00<br />

D Parfum Variety Eco 613871 Parfum Kurt Kizing 0.30<br />

Citric Acid (sol 20%ig) Citric Acid q.s.<br />

Manufacturing Procedure:<br />

1. Heat Phase A up to 40°C and disperse Keltrol. Heat phase B1 up to 40°C.<br />

2. Emulsify phase B1 into phase A under stirring. Add phase B under strong stirring.<br />

3. Mix for 10 minutes. Homogenize for 3-5 min using Ultra Turrax.<br />

4. Add C and D below 30°C and cool down under stirring. Adjust pH value if necessary.<br />

Specification Values:<br />

Appearance: Soft and light white emulsion.<br />

pH: 5.2 – 5.5.<br />

Viscosity (Brookfield: Helipath TF; Speed 10): 4.000 - 10.000 mPas.<br />

Centrifugation (15 min., 4.000 rpm): No separation.<br />

Stability: More than 3 months stable at 20°C, 40°C and 4°C.<br />

Microbiological Stability: Proven.<br />

100.00<br />

* distributed<br />

in Germany by<br />

Dr. Straetmans GmbH<br />

Disclaimer:<br />

The information contained herein is meant to demonstrate how our products can be used. The given data are suggestions without any<br />

guarantee aimed to support customers’ development. As production conditions at our customers’ facilities are beyond our control we<br />

refuse to accept any liability involved in the use of our products. Please observe possible third party patent rights.<br />

Page 22 O/W-Emulsions Skin Care


<strong>Natural</strong> Sun W/O<br />

L038-2.1-0209<br />

Claims: Preservative free<br />

Estimated SPF*: 12; UVA/UVB Ratio*: 0,75<br />

Phase Ingredient INCI Supplier %<br />

A Deionised Water Aqua 48.45<br />

Glycerol Glycerin 7.00<br />

Zinksulfat Heptahydrat Zinc Sulfate Merck 1.00<br />

Citric Acid (sol 20%) Citric Acid Merck 0.05<br />

B dermofeel ® PR Polyglyceryl-3-Polyricinoleate Dr. Straetmans 5.00<br />

dermosoft ® GMC Glyceryl Caprate Dr. Straetmans 0.50<br />

dermofeel ® PO Glyceryl Oleate Dr. Straetmans 1.00<br />

dermofeel ® sensolv Isoamyl Laurate Dr. Straetmans 10.00<br />

dermofeel ® MCT Tricaprylin Dr. Straetmans 15.00<br />

Cutina HR Hydrogenated Castor Oil Cognis 0.25<br />

Bienenwachs 8104, weiß, rein Cera Alba Kahl & Co 0.25<br />

Zincum N 29 veg. Grade Zinc Stearate Wiga Pharma 0.50<br />

alpha Bisabolol, nat. Bisabolol GfN 0.10<br />

dermofeel ® Toco 70<br />

non-GMO<br />

B1 UV_Titan M160<br />

Tocopherol, Helianthus Annuus<br />

(Sunflower) Seed Oil<br />

Titanium Dioxide, Aluminia,<br />

Stearic Acid<br />

Dr. Straetmans 0.20<br />

Sachtleben 5.50<br />

Zinc Oxide Neutral Zinc Oxide Symrise 5.00<br />

C Parf. Unique Po250080 Parfum Frey & Lau 0.30<br />

Manufacturing Procedure:<br />

1. Heat phase A up to 80°C.<br />

2. Heat phase B up to 80°C. Add B1 and verify the complete dispersion of pigments.<br />

3. Emulsify phase A slowly to phase B under stirring.<br />

4. Homogenize for 2 – 5 min. using an Ultra Turrax.<br />

5. Cool down to 32°C and add C under stirring.<br />

Specification Values:<br />

Appearance: White soft cream.<br />

Viscosity (Brookfield: Spin 6; Speed 10): Approx. 30.000 mPas.<br />

Centrifugation (10 min., 5.000 rpm): No separation.<br />

Microbiological stability: Proven.<br />

*calculated with the Ciba Sunscreen Simulator<br />

100.00<br />

Disclaimer:<br />

The information contained herein is meant to demonstrate how our products can be used. The given data are suggestions without any<br />

guarantee aimed to support customers’ development. As production conditions at our customers’ facilities are beyond our control we<br />

refuse to accept any liability involved in the use of our products. Please observe possible third party patent rights.<br />

W/O-Emulsions Page 23


Claims: Preservative free<br />

Rich skin feeling<br />

<strong>Natural</strong> W/O Basic <strong>Cream</strong><br />

L019-30B-108<br />

Phase Ingredient INCI Supplier %<br />

A Deionised Water Aqua 55.25<br />

Glycerol Glycerin Merck 7.00<br />

Zn-Sulfate Zinc Sulfate Merck 1.00<br />

dermosoft ® 688 ECO Parfum Dr. Straetmans 0.20<br />

dermosoft ® GMCY Glycreryl Caprylate Dr. Straetmans 0.70<br />

Citric Acid (sol 20%) Citric Acid Merck q. s.<br />

B dermofeel ® PR Polyglyceryl-3-Polyricinoleate Dr. Straetmans 5.00<br />

Beeswax, white 8104 Cera Alba Kahl & Co 4.00<br />

Sunflower Seed Oil Helianthus Annuus (Sunflower)<br />

Seed Oil<br />

dermofeel ® Toco 70<br />

non-GMO<br />

Tocopherol, Helianthus Annuus<br />

(Sunflower) Seed Oil<br />

16.00<br />

Dr. Straetmans 0.20<br />

B1 Mg-Stearate Magnesium Stearate Merck 0.50<br />

C<br />

Miglyol 812 Caprylic/Capric Triglyceride Sasol 10.00<br />

Parfum Bambini Natura Öko<br />

Parfum<br />

Düllberg<br />

Konzentra<br />

Manufacturing Procedure:<br />

1. Heat phase A up to 80°C. Make sure that dermosoft ® 688 ECO is completely<br />

dissolved. Adjust pH-value to 5.1 – 5.3 with Citric Acid. Maintain temperature to 78°C.<br />

2. Heat phase B1 up to 115°C until clear solution obtains.<br />

3. Add rest of phase B and heat up to 78°C<br />

4. Emulsify phase A slowly, stepwise to phase B under stirring.<br />

5. Homogenize for 1 – 2 min. using an Ultra Turrax.<br />

6. Cool down to 32°C and add C under stirring.<br />

Specification Values:<br />

Appearance: Thick white cream.<br />

Viscosity (Brookfield: Helipath TF; Speed 10): 60.000 – 100.000 mPas.<br />

Centrifugation (10 min., 5.000 rpm): No separation.<br />

Stability: More than 3 months stable at 20°C, 40°C and 4°C.<br />

Microbiological Stability: Proven.<br />

Disclaimer:<br />

The information contained herein is meant to demonstrate how our products can be used. The given data are suggestions without any<br />

guarantee aimed to support customers’ development. As production conditions at our customers’ facilities are beyond our control we<br />

refuse to accept any liability involved in the use of our products. Please observe possible third party patent rights.<br />

Page 24 W/O-Emulsions<br />

0.15<br />

100.00


Claims: preservative free<br />

Light skin feeling<br />

<strong>Natural</strong> W/O Lotion<br />

L019-70-807<br />

Phase Ingredient INCI Supplier %<br />

A Deionised Water Aqua 64.10<br />

dermosoft ® GMCY Glyceryl Caprylate Dr. Straetmans 0.70<br />

dermosoft ® 688 ECO Parfum Dr. Straetmans 0.20<br />

Glycerol Glycerin 7.00<br />

Sodium Chloride Sodium Chloride 1.00<br />

B dermofeel ® PR Polyglyceryl-3<br />

Polyglycerinoleate<br />

Dr. Straetmans 3.00<br />

Lameform TGI Polyglyceryl-3 Diisostearate Cognis 2.00<br />

Sunflower Seed Oil Helianthus Annuus<br />

(Sunflower) Seed Oil<br />

Disclaimer:<br />

The information contained herein is meant to demonstrate how our products can be used. The given data are suggestions without any<br />

guarantee aimed to support customers’ development. As production conditions at our customers’ facilities are beyond our control we<br />

refuse to accept any liability involved in the use of our products. Please observe possible third party patent rights.<br />

W/O-Emulsions Page 25<br />

7.00<br />

Phytosqualan Squalane NRC / Sophim 6.00<br />

dermofeel ® Toco 70<br />

non-GMO<br />

Tocopherol, Helianthus<br />

Annuus (Sunflower) Seed Oil<br />

Dr. Straetmans<br />

0.20<br />

B1 dermofeel ® MCT Tricaprylin Dr. Straetmans 8.00<br />

Mg-Stearate Magnesium Stearate Merck 0.50<br />

C Frag. Aprikose Mandel<br />

Natura Öko 215-530<br />

Parfum, Geraniol, Linalool,<br />

Limonen<br />

Düllberg<br />

Konzentrat<br />

Manufacturing Procedure:<br />

1. Heat phase A up to 78°C. Adjust pH-value to pH 5.1 – 5.3 with Citric Acid.<br />

2. Maintain temperature at 78°C.<br />

3. Heat phase B1 up to 115°C until a clear solution is obtained.<br />

Add rest of phase B and heat up to 78°C.<br />

4. Emulsify phase A slowly, stepwise, into phase B under stirring.<br />

5. Homogenize for 1 – 2 min. using an Ultra Turrax.<br />

6. Cool down to 32°C under stirring. Add perfume oil.<br />

Specification Values:<br />

Appearance: Soft, white Lotion.<br />

Viscosity (Brookfield: LV 6; 10 rpm): Approx. 10.000 mPa . s.<br />

Centrifugation (5.000 rpm, 29.00 RZB, 10 min.): No separation.<br />

Stability: More than 3 months stable at 40°C, 20°C and 4°C.<br />

Microbiological Stability: Proven.<br />

0.30<br />

100.00<br />

* distributed<br />

in Germany by<br />

Dr. Straetmans GmbH


Claims: PEG-free<br />

Conditioning<br />

Preservative free<br />

<strong>Natural</strong> Cleansing Foam<br />

L014.-1.04-1207<br />

Phase Ingredient INCI Supplier %<br />

A Deionised Water Aqua 50.20<br />

dermofeel ® PA-3 Sodium Phytate, Aqua Dr. Straetmans 0.10<br />

Orange Flower Water<br />

B Amisoft CS 22 (25%)<br />

Rewoteric AMC<br />

Citrus Aurantium Dulis<br />

(orange) Flower Water<br />

Sodium Cocoyl<br />

Glutamate,<br />

Disodium Cocoyl<br />

Glutamate<br />

Sodium<br />

Cocoamphoacetate<br />

15.00<br />

NRC / Ajinomoto 8.00<br />

Evonik<br />

Goldschmidt<br />

15.00<br />

Plantacare 818 (50% AS) Coco Glucoside Cognis 6.00<br />

dermofeel ® G 10 LW<br />

Polyglyceryl-10 Laurate,<br />

Aqua<br />

Dr. Straetmans 4.00<br />

dermosoft ® 747 Parfum Dr. Straetmans 0.20<br />

dermosoft ® 700 B Parfum Dr. Straetmans 0.70<br />

dermofeel ® P-30 PCA Glyceryl Oleate Dr. Straetmans 0.50<br />

dermosoft ® SLL<br />

Sodium Lauroyl<br />

Lactylate<br />

Dr. Straetmans 0.30<br />

C Citric Acid (sol. 20%) Citric Acid Merck q.s.<br />

Manufacturing Procedure:<br />

1. Premix phase B. Make sure all components are completely dissolved.<br />

2. Adjust pH-value with part C to pH 5.0 – 5.5.<br />

3. Add phase A.<br />

4. Fill in Airfoam-containers (www.airsprayintl.com).<br />

Specification Values:<br />

Appearance: Clear liquid.<br />

pH: 5.0 – 5.5.<br />

Stability:<br />

Stable for more than 3 months at 20°C, 40°C and 4°C.<br />

Mircobiological Stability: Proven.<br />

100.00<br />

Disclaimer:<br />

The information contained herein is meant to demonstrate how our products can be used. The given data are suggestions without any<br />

guarantee aimed to support customers’ development. As production conditions at our customers’ facilities are beyond our control we<br />

refuse to accept any liability involved in the use of our products. Please observe possible third party patent rights.<br />

Page 26 Rinse-Off Skin Care


<strong>Natural</strong> Facial Cleansing Gel<br />

L004-01.11-707<br />

Claims: PEG-free transparent oil gel<br />

Emulsify by contact with water<br />

Removable without oily residues on the skin<br />

Phase Ingredient INCI Supplier %<br />

A dermofeel ® G 5 O Polyglyceryl-5 Oleate Dr. Straetmans 6.00<br />

Glycerol (anhydrous) Glycerin Merck 15.00<br />

B Miglyol 810 Caprylic/capric Triglycerides Sasol 31.50<br />

Olive Oil (extra verg.) Olea Europaea (Olive) Fruit Oil 45.87<br />

dermofeel ® Toco 70<br />

non-GMO<br />

Tocopherol, Helianthus Annuus<br />

(Sunflower) Seed Oil<br />

Dr. Straetmans<br />

C Deionised Water Aqua app. 1.43<br />

Disclaimer:<br />

The information contained herein is meant to demonstrate how our products can be used. The given data are suggestions without any<br />

guarantee aimed to support customers’ development. As production conditions at our customers’ facilities are beyond our control we<br />

refuse to accept any liability involved in the use of our products. Please observe possible third party patent rights.<br />

Rinse-Off Skin Care Page 27<br />

0.20<br />

100.00<br />

Manufacturing Procedure:<br />

1. Premix dermofeel ® G 5 O and Glycerol under stirring and light heating until a<br />

homogeneous gel results.<br />

2. Add oil phase B to phase A at room temperature stepwise and in small portions<br />

under forced stirring. Before addition of the next portion each step should be stirred<br />

very well until a homogenous gel results. Viscosity will increase after each addition.<br />

3. After addition of the oil phase adjust viscosity and refractive index with water.<br />

4. De-air the product.<br />

Specification Values:<br />

Appearance: Clear yellow viscous gel.<br />

Viscosity (Brookfield: LV4; Speed 10): Approx. 60 000 mPas.<br />

Centrifuge (15 min., 4000 rpm): No separation.<br />

Stability:<br />

More than 3 months stable at 20°C and 4°C, some turbidity at 40°C after 6 weeks.<br />

Additional Note:<br />

The first step in formulating an oil gel is always to dissolve the emulsifier dermofeel ® G 5 O in a polar<br />

medium, preferably Glycerol. Then stepwise addition of oil at room temperature under forced stirring follows.<br />

In this procedure the oil gel is formed.<br />

It is very important to add the oil stepwise and very slowly to allow the system to form the gel without to much<br />

oil at once. 1/10 oil weight to glycerol weight is recommended for the first 5 – 10 increments. Later on the<br />

amount of oil for each portion can increase.<br />

After the oil has been added completely, adjustment of viscosity and / or transparency can be done by<br />

addition of water. For transparent products the refractive indexes of the oil phase and the water phase have<br />

to be almost the same (difference > 0,005).


Claims: Preservative free<br />

Refatting<br />

PEG-free<br />

No residues in the bathtub<br />

<strong>Natural</strong> Soothing Bath Oil<br />

52-03-107<br />

Phase Ingredient INCI Supplier %<br />

A dermofeel ® PP Polyglyceryl-3 Palmitate Dr. Straetmans 10.00<br />

dermosoft ® GMCY Glyceryl Caprylate Dr. Straetmans 10.00<br />

Cupuacu Butter<br />

Sunflower Seed Oil<br />

B Sunflower Seed Oil<br />

dermofeel ® Toco 70<br />

non-GMO<br />

Frag. Aprikose-Mandel<br />

Natura Öko 215-530<br />

Theobroma Grandiflorum<br />

Seed Butter<br />

Helianthus Annuus<br />

(Sunflower) Seed Oil<br />

Helianthus Annuus<br />

(Sunflower) Seed Oil<br />

Tocopherol, Helianthus<br />

Annuus (Sunflower) Seed<br />

Oil<br />

Parfum, Geraniol, Linalool,<br />

Limonen<br />

Laboratoires<br />

Expanscience<br />

Disclaimer:<br />

The information contained herein is meant to demonstrate how our products can be used. The given data are suggestions without any<br />

guarantee aimed to support customers’ development. As production conditions at our customers’ facilities are beyond our control we<br />

refuse to accept any liability involved in the use of our products. Please observe possible third party patent rights.<br />

Page 28 Rinse-Off Skin Care<br />

5.00<br />

15.00<br />

57.50<br />

Dr. Straetmans 1.00<br />

Düllberg<br />

Konzentra<br />

1.50<br />

100.00<br />

Manufacturing Procedure:<br />

1. Melt phase A at approx. 60°C.<br />

2. Add ingredients of phase B one after the other until a clear solution is obtained.<br />

Specification Values:<br />

Appearance: Clear yellow liquid.<br />

Stability:<br />

More than 3 months stable at 20°C, 40°C, and 4°C.


Claims: Moisturizing<br />

Soft skin feel<br />

Soft Cleansing Milk ECO<br />

L018-72-1107<br />

Phase Ingredient INCI Supplier %<br />

A Deionised Water Aqua 55.85<br />

Rose Flower Water Rosa Centifolia Flower Water Sanoflore 15.00<br />

dermofeel ® PA-3 Sodium Phytate, Aqua Dr. Straetmans 0.05<br />

dermosoft ® GMCY Glyceryl Caprylate Dr. Straetmans 0.70<br />

dermosoft ® 688 ECO Parfum Dr. Straetmans 0.20<br />

Glycerol Glycerin 2.50<br />

A1 Keltrol SFT Xanthan Gum CP Kelco 0.40<br />

B Amisol Soft Behenyl Alcohol, Glyceryl Stearate,<br />

Lecithin, Glycine Soja (Soybean)<br />

Sterols<br />

Lucas Meyer* 3.00<br />

C dermofeel ® TC-7 Triheptanoin Dr. Straetmans 8.00<br />

Safflower Oil Carthamus Tinctorius (Safflower)<br />

Seed Oil<br />

dermofeel ® Toco 70<br />

non-GMO<br />

Tocopherol, Helianthus Annuus<br />

(Sunflower) Seed Oil<br />

D Hydraporine Nature Betaine, Aqua, Glycerin,<br />

Hydrogenated Lecithin, Honey,<br />

Pectin<br />

Henry Lamotte 8.00<br />

Dr. Straetmans 0.30<br />

Lucas Meyer* 4.00<br />

dermofeel ® G 10 LW Polyglyceryl-10 Laurate, Aqua Dr. Straetmans 2.00<br />

Manufacturing Procedure:<br />

1. Heat phase A up to 75°C – 80°C under stirring until dermosoft ® 688 ECO is completely<br />

dissolved. Disperse Keltrol<br />

2. Add Amisol Soft, and keep batch under slow stirring during approx. 20 min (hydration step).<br />

3. Heat phase C up to 75°C - 80°C and add to A/B. Mix slowly during 5 min (emulsifcation step).<br />

4. Homogenize for approx. 2 min. using an Ultra Turrax.<br />

5. Cool down under medium stirring. Add phase D below 40°C. Adjust pH if necessary.<br />

Specification Values:<br />

Appearance: Off-white lotion.<br />

pH: 5.2 – 5.4.<br />

Viscosity (Brookfield: LV 4; 10 rpm): Approx. 6.000 – 10.000 mPa . s.<br />

Centrifugation (4.000 rpm, 20 min.): No separation.<br />

Stability: More than 3 months stable at 4°C, 40°C and 20°C.<br />

Mircobiological Stability: Proven.<br />

100.00<br />

* distributed<br />

in Germany by<br />

Dr. Straetmans GmbH<br />

Disclaimer:<br />

The information contained herein is meant to demonstrate how our products can be used. The given data are suggestions without any<br />

guarantee aimed to support customers’ development. As production conditions at our customers’ facilities are beyond our control we<br />

refuse to accept any liability involved in the use of our products. Please observe possible third party patent rights.<br />

Rinse-Off Skin Care Page 29


<strong>Natural</strong> Sugar Scrub<br />

L004-01.14C-807<br />

Claims: PEG-free oil gel with abrasive effect<br />

Emulsify by contact with water<br />

Removable without oily residues on the skin<br />

Phase Ingredient INCI Supplier %<br />

A dermofeel ® G 5 O Polyglyceryl-5 Oleate Dr. Straetmans 6.00<br />

Glycerol (anhydrous) Glycerin Merck 10.00<br />

B Miglyol 812 Caprylic/Capric Triglycerides Sasol 31.50<br />

Sunflower Seed Oil<br />

dermofeel ® Toco 70<br />

non-GMO<br />

Frag. Keep Smiling Natura Öko<br />

0708-015<br />

Helianthus Annuus (Sunflower)<br />

Seed Oil<br />

Tocopherol, Helianthus Annuus<br />

(Sunflower) Seed Oil<br />

Dr. Straetmans<br />

Parfum Düllberg<br />

Konzentra<br />

C Deionised Water Aqua 1.34<br />

30.76<br />

D Sugar Sugar 20.00<br />

Disclaimer:<br />

The information contained herein is meant to demonstrate how our products can be used. The given data are suggestions without any<br />

guarantee aimed to support customers’ development. As production conditions at our customers’ facilities are beyond our control we<br />

refuse to accept any liability involved in the use of our products. Please observe possible third party patent rights.<br />

Page 30 Rinse-Off Skin Care<br />

0.20<br />

0.20<br />

100.00<br />

Manufacturing Procedure:<br />

1. Premix dermofeel ® G 5 O and Glycerol under stirring and with light heating until a<br />

homogenous gel results.<br />

2. Add oil phase B to phase A at room temperature stepwise and in small portions under<br />

forced stirring. Before addition of the next portion each step should be stirred very well until<br />

a homogenous gel results. Viscosity will increase after each addition.<br />

3. After addition of the oil phase adjust viscosity and refractive index with water.<br />

4. Add phase D.<br />

Specification Values:<br />

Appearance: High viscous, white translucent gel with grains.<br />

Viscosity (Brookfield: LV4; Speed 10): Not measurable (> 100.000 mPas)<br />

Stability: More than 3 months stable at 20°C and 4°C, some turbidity at 40°C.<br />

Additional Note:<br />

The first step in formulating an oil gel is always to dissolve the emulsifier dermofeel ® G 5 O in a polar<br />

medium, preferably Glycerol. Then stepwise addition of oil at room temperature under forced stirring follows.<br />

In this procedure the oil gel is formed.<br />

It is very important to add the oil stepwise and very slowly to allow the system to form the gel without to much<br />

oil at once. 1/10 oil weight to glycerol weight is recommended for the first 5 – 10 increments. Later on the<br />

amount of oil for each portion can increase.<br />

After the oil has been added completely, adjustment of viscosity and / or transparency can be done by<br />

addition of water. For transparent products the refractive indexes of the oil phase and the water phase have<br />

to be almost the same (difference > 0,005).


Claims: PEG-free<br />

Preservative free<br />

<strong>Natural</strong> Shower Gel Sensitive<br />

L001-97B-908<br />

Phase Ingredient INCI Supplier %<br />

A Tap Water Aqua 0<br />

dermofeel ® PA-3 Sodium Phytate, Aqua Dr. Straetmans 0.10<br />

Eucarol AGE EC<br />

Amisoft CS-22<br />

Disodium Cocopolyglycose<br />

Citrate<br />

Sodium Cocoyl Glutamate,<br />

Disodium Cocoyl Glutamate<br />

Chesalpinia 8.50<br />

Ajinomoto 8.00<br />

Plantacare 1200 UP Lauryl Gucoside Cognis 18.50<br />

B dermofeel ® PO Glyceryl Oleate Dr. Straetmans 0.70<br />

Glycerol Glycerin 15.00<br />

C dermosoft ® 1388 ECO Parfum Dr. Straetmans 3.50<br />

Ajidew NL-50 Sodium PCA Ajinomoto 2.00<br />

Frag. Priceless Natura Öko<br />

0606-015<br />

Parfum, Geraniol, Linalool,<br />

Limonen<br />

Düllberg<br />

Konzentra<br />

Citric Acid (sol.20%) Citric Acid q. s.<br />

Disclaimer:<br />

The information contained herein is meant to demonstrate how our products can be used. The given data are suggestions without any<br />

guarantee aimed to support customers’ development. As production conditions at our customers’ facilities are beyond our control we<br />

refuse to accept any liability involved in the use of our products. Please observe possible third party patent rights.<br />

Rinse-Off Skin Care Page 31<br />

0.20<br />

Sodium Chloride Sodium Chloride q. s.<br />

Manufacturing Procedure:<br />

1. Mix ingredients of phase A.<br />

2. Melt components of phase B at approx. 60°C.<br />

3. Add Premix of phase B to phase A under stirring.<br />

4. Add components of phase C one after the other under stirring.<br />

5. Adjust pH and viscosity if necessary.<br />

Specification Values:<br />

Appearance: Clear viscous gel.<br />

pH: 5.2 – 5.4<br />

Viscosity (Brookfield: LV 3; Speed 10): 2000 - 3500 mPa . s.<br />

Stability: More than 3 months stable at 20°C, 40°C and 4°C.<br />

Microbiological Stability: Proven.<br />

100.00


Claims: Preservative free<br />

Refatting<br />

PEG-free<br />

Slight foaming capability<br />

<strong>Natural</strong> Shower Oil<br />

L034-2.14-1108<br />

Phase Ingredient INCI Supplier %<br />

A dermosoft ® SLL Sodium Lauroyl Lactylate Dr. Straetmans 5.00<br />

dermosoft ® GMCY Glyceryl Caprylate Dr. Straetmans 6.00<br />

Jojoba Oil<br />

Avocado Oil<br />

Sunflower Seed Oil<br />

Simmondsia Chinensis (Jojoba)<br />

Seed Oil<br />

Persea Gratissima (Avocado)<br />

Oil<br />

Helianthus Annuus (Sunflower)<br />

Seed Oil<br />

Gustav Heess 10.00<br />

Henry Lamotte 5.00<br />

30.00<br />

B dermofeel ® MCT Tricaprylin Dr. Straetmans 36.00<br />

dermofeel ® Toco 70<br />

non-GMO<br />

Frag. Multivitamin<br />

P0125564<br />

Tocopherol, Helianthus<br />

Annuus (Sunflower) Seed Oil<br />

Dr. Straetmans 1.00<br />

Parfum Frey & Lau 3.00<br />

C Aerosil 200 Silica Evonik 4.00<br />

Manufacturing Procedure:<br />

1. Melt phase A at approx. 60°C.<br />

2. Add ingredients of phase B one after the other until a clear solution is obtained<br />

3. Add ingredients of phase C and stir well until a homogenous gel is obtained.<br />

Specification Values:<br />

Appearance: Clear yellow gel.<br />

Viscosity (Brookfield: LV 3; Speed 10): 1.000 – 2.000 mPa . s.<br />

Stability: More than 3 months stable at 20°C, 40°C and 4°C.<br />

100.00<br />

Disclaimer:<br />

The information contained herein is meant to demonstrate how our products can be used. The given data are suggestions without any<br />

guarantee aimed to support customers’ development. As production conditions at our customers’ facilities are beyond our control we<br />

refuse to accept any liability involved in the use of our products. Please observe possible third party patent rights.<br />

Page 32 Rinse-Off Skin Care


<strong>Natural</strong> Clear Shampoo<br />

L023-2.11-1208<br />

Claims*: PEG-free<br />

Preservative free<br />

Smooth conditioning and combing efficacy<br />

Phase Ingredient INCI Supplier %<br />

A Tap Water Aqua 54.40<br />

dermofeel ® PA-3 Sodium Phytate, Aqua Dr. Straetmans 0.10<br />

Texapon K12 G Sodium Lauryl Sulfate Cognis 6.00<br />

Amisoft CS-22<br />

Sodium Cocoyl Glutamate,<br />

Disodium Cocoyl Glutamate<br />

Ajinomoto 5.00<br />

Plantacare 2000 UP Decyl Gucoside Cognis 18.50<br />

Glycerin Glycerin Merck 5.00<br />

Lamesoft PO 65<br />

Coco Glucoside, Glyceryl<br />

Oleate<br />

Cognis 1,.0<br />

Trimethylglycine (nat. Betaine) Betaine Finnfeed 4.00<br />

dermofeel ® P-30 PCA Glyceryl Oleate Dr. Straetmans 1.00<br />

B dermosoft ® 1388 ECO Parfum Dr. Straetmans 3.50<br />

Frag. Priceless Natura Öko Parfum Düllberg 0.50<br />

C Sodium Chloride Sodium Chloride q.s.<br />

Citric Acid (sol.20%) Citric Acid q. s.<br />

Manufacturing Procedure:<br />

1. Heat water up to 60°C.<br />

2. Add components of phase A one after the other under stirring until all components are completely<br />

dissolved.<br />

3. Add components of phase B.<br />

4. Adjust pH 5,2-5,5 and viscosity if necessary.<br />

Specification Values:<br />

Appearance: Clear viscous gel.<br />

pH: 5.2 – 5.5.<br />

Viscosity (Brookfield: LV 3; Speed 10): 2.500 3.000 mPa . s.<br />

Stability: Stable for more than 3 months at 40°C, 20°C and 4°C.<br />

Microbiological Stability: Proven.<br />

* Claims supported by combing force measurements<br />

100.00<br />

Disclaimer:<br />

The information contained herein is meant to demonstrate how our products can be used. The given data are suggestions without any<br />

guarantee aimed to support customers’ development. As production conditions at our customers’ facilities are beyond our control we<br />

refuse to accept any liability involved in the use of our products. Please observe possible third party patent rights.<br />

Rinse-Off Hair Care Page 33


Claims: Sensitive Skin<br />

Preservative free<br />

Smooth conditioning<br />

<strong>Natural</strong> Shampoo Sensitive<br />

L023-4.3-209<br />

Phase Ingredient INCI Supplier %<br />

A Tap Water Aqua 58.20<br />

dermofeel ® PA-3 Sodium Phytate, Aqua Dr. Straetmans 0.10<br />

Eucarol AGE EC Disodium Cocopolyglucose<br />

Citrate(30%ig)<br />

Amisoft CS-22 (25%AS) Sodium Cocoyl Glutamate,<br />

Disodium Cocoyl Glutamate<br />

NRC/Chesalpinia 8.50<br />

Ajinomoto 8.00<br />

Plantacare 2000 UP Decyl Gucoside Cognis 18.50<br />

B dermosoft ® 1388 ECO Parfum Dr. Straetmans 3.50<br />

Ajidew NL-50 Sodium PCA, Aqua Rahn 1.00<br />

dermofeel ® P-30 PCA Glyceryl Oleate Dr. Straetmans 1.00<br />

Gluadin AGP Hydrolyzed Wheat Protein Cognis 0.50<br />

Frag. Priceless Natura Parfum Düllberg 0.20<br />

C Citric Acid (sol.20%) Citric Acid q. s.<br />

Sodium Chloride Sodium Chloride q. s.<br />

Manufacturing Procedure:<br />

1. Mix components of phase A one after the other under stirring.<br />

2. Add ingredients of phase B one after the other to phase A under stirring<br />

until completely dissolved.<br />

3. Start to cool down under medium stirring<br />

4. Add phase C and adjust pH and viscosity if necessary.<br />

Specification Values:<br />

Appearance: Clear viscous gel.<br />

pH: 5.2 – 5.4<br />

Viscosity (Brookfield: LV 3; Speed 10): 2000 - 3500 mPa . s.<br />

Stability: Stable for more than 3 months at 40°C, 20°C and 4°C.<br />

Microbiological Stability: Proven.<br />

100.00<br />

Disclaimer:<br />

The information contained herein is meant to demonstrate how our products can be used. The given data are suggestions without any<br />

guarantee aimed to support customers’ development. As production conditions at our customers’ facilities are beyond our control we<br />

refuse to accept any liability involved in the use of our products. Please observe possible third party patent rights.<br />

Page 34 Rinse-Off Hair Care


<strong>Natural</strong> Clear Skin Tonic<br />

L010-03B-107<br />

Claims: PEG-free transparent fluid<br />

Synergistic effect against skin impurities with Seboclear<br />

Dermosoft GMCY is effective against Propionibact. Acnes<br />

Phase Ingredient INCI Supplier %<br />

A Deionised Water Aqua 67.65<br />

dermofeel ® PA-3 Sodium Phytate, Aqua Dr. Straetmans 0.10<br />

Glycerol (anhydrous) Glycerin Merck 5.00<br />

Ajidew NL-50 Sodium PCA, Aqua<br />

Rahn /<br />

Ajinomoto<br />

B Ethanol Alcohol 20.00<br />

Disclaimer:<br />

The information contained herein is meant to demonstrate how our products can be used. The given data are suggestions without any<br />

guarantee aimed to support customers’ development. As production conditions at our customers’ facilities are beyond our control we<br />

refuse to accept any liability involved in the use of our products. Please observe possible third party patent rights.<br />

Other Formulations Page 35<br />

2.00<br />

dermosoft ® GMCY Glyceryl Caprylate Dr. Straetmans 1.00<br />

dermofeel ® G 10 L Polyglyceryl-10 Laurate Dr. Straetmans 2.00<br />

alpha Bisabolol, nat. Bisabolol GfN 0.05<br />

Frag. Lemon Verbena<br />

Natura 0606-093<br />

C Seboclear<br />

Parfum, Citral, Geraniol, Linalool,<br />

Citronellol, Limonen<br />

Alcohol, Aqua, Plantago<br />

Lanceolata Extract, Berberis<br />

Aquifolium Extract, Sodium<br />

Salicylate<br />

Düllberg<br />

Konzentra<br />

Manufacturing Procedure:<br />

1. Premix phases A.<br />

2. Dissolve Perfume and Bisabolol in dermofeel ® G 10 L and add the rest of<br />

phase B until all ingredients are dissolved clearly.<br />

3. Add phase A slowly to phase B under stirring.<br />

4. Add part C.<br />

Specification Values:<br />

Appearance: Clear, light yellow liquid.<br />

pH: 5.5 – 6.0<br />

Stability:<br />

More than 3 months stable at 40°C, 20°C and 4°C.<br />

Microbiological Stability: Proven.<br />

0.20<br />

Rahn 2.00<br />

100.00


Claims: Alcohol free<br />

Anti-ageing<br />

Hydrating and vitalizing<br />

<strong>Natural</strong> Hydrating Skin Fluid<br />

L010-17-108<br />

Phase Ingredient INCI Supplier %<br />

A Deionised Water Aqua 79.20<br />

dermofeel ® PA-3 Sodium Phytate, Aqua Dr. Straetmans 0.10<br />

Glycerol Glycerin 10.00<br />

dermosoft ® 1388 ECO Parfum Dr. Straetmans 3.00<br />

B dermosoft ® GMCY Glyceryl Caprylate Dr. Straetmans 0.50<br />

dermofeel ® G 10 LW Polyglyceryl-10 Laurate, Aqua Dr. Straetmans 3.00<br />

Frag. Ringelblume Natura<br />

0606-250<br />

Parfum, Coumarin, Geraniol,<br />

Linalool, Citronellol, Limonen<br />

C Laminactine Glycerin, Aqua, Lysolecithin,<br />

Perilla Frutescens (Perilla)<br />

Seed Oil<br />

Hydraporine Nature Betaine, Aqua, Glycerin,<br />

Hydrogenated Lecithin, Honey,<br />

Pectin<br />

Düllberg<br />

Konzentra<br />

Disclaimer:<br />

The information contained herein is meant to demonstrate how our products can be used. The given data are suggestions without any<br />

guarantee aimed to support customers’ development. As production conditions at our customers’ facilities are beyond our control we<br />

refuse to accept any liability involved in the use of our products. Please observe possible third party patent rights.<br />

Page 36 Other Formulations<br />

0.20<br />

Lucas Meyer* 2.00<br />

Lucas Meyer* 2.00<br />

100.00<br />

Manufacturing Procedure:<br />

1. Premix phases A.<br />

2. Dissolve components of phase B in dermofeel ® G 10 LW and mix until all ingredients<br />

are clearly dissolved.<br />

3. Add phase A slowly to phase B under stirring.<br />

4. Add part C and adjust pH if necessary.<br />

Specification Values:<br />

Appearance: Milky, translucent liquid.<br />

pH: 5.2 – 5.4.<br />

Stability: More than 3 months stable at 40°C, 20°C and 4°C.<br />

Microbiological Stability: Proven.


Claims: Alcohol free<br />

Anti-Aging<br />

Moisturizing<br />

<strong>Natural</strong> Regenerating Skin Fluid<br />

L010-18-308<br />

Phase Ingredient INCI Supplier %<br />

A Deionised Water Aqua 78.40<br />

dermofeel ® PA-3 Sodium Phytate, Aqua Dr. Straetmans 0.10<br />

Glycerin (anhydrous) Glycerin Merck 10.00<br />

Ajidew NL-50 Sodium PCA, Aqua<br />

Rahn /<br />

Ajinomoto<br />

B dermosoft ® GMCY Glyceryl Caprylate Dr. Straetmans 0.50<br />

Disclaimer:<br />

The information contained herein is meant to demonstrate how our products can be used. The given data are suggestions without any<br />

guarantee aimed to support customers’ development. As production conditions at our customers’ facilities are beyond our control we<br />

refuse to accept any liability involved in the use of our products. Please observe possible third party patent rights.<br />

Other Formulations Page 37<br />

2.00<br />

dermosoft ® 1388 ECO Parfum Dr. Straetmans 3.00<br />

dermofeel ® G 10 LW Polyglyceryl-10 Laurate, Aqua Dr. Straetmans 4.00<br />

C Laminactine<br />

Glycerin, Aqua, Lysolecithin,<br />

Perilla Frutescens (Perilla)<br />

Seed Oil<br />

Lucas Meyer* 2.00<br />

100.00<br />

Manufacturing Procedure:<br />

1. Premix phases A.<br />

2. Dissolve components of phase B in dermofeel ® G 10 LW and mix until all ingredients<br />

are clearly dissolved.<br />

3. Add phase A slowly to phase B under stirring.<br />

4. Add part C and adjust pH if necessary.<br />

Specification Values:<br />

Appearance: Milky, white liquid.<br />

pH: 5.3 – 5.5.<br />

Stability: More than 3 months stable at 40°C, 20°C and 4°C.<br />

Microbiological Stability: Proven.


<strong>Natural</strong> Microemulsion<br />

L004-03.41-607<br />

Claims: PEG-free transparent liquid<br />

Excellent self-emulsifying properties<br />

Suitable as wet-wipe concentrate, bath oil, cleansing oil…<br />

Phase Ingredient INCI Supplier %<br />

A Deionised Water Aqua 10.00<br />

Karion F liquid Sorbitol Merck 17.00<br />

B Phytosqualan Squalane NRC / Sophim 20.00<br />

Jojoba Oil<br />

Simmondsia Chinensis<br />

(Jojoba) Seed Oil<br />

Tegosoft DC Decyl Cocoate<br />

Gustav Heess 10.00<br />

Evonik<br />

Goldschmidt<br />

20.50<br />

dermosoft ® GMCY Glyceryl Caprylate Dr. Straetmans 4.00<br />

dermofeel ® G 5 DO Polyglyceryl-5 Dioletate Dr. Straetmans 9.50<br />

dermofeel ® G 10 DI<br />

Polyglyceryl-10<br />

Diisostearate<br />

Dr. Straetmans 9.00<br />

100.00<br />

Manufacturing Procedure:<br />

1. Premix phase B under slight heating until all components are completely dissolved.<br />

2. Add phase A to phase B under stirring.<br />

3. Cool down to room temperature while stirring.<br />

Specification Values:<br />

Appearance: Clear yellow liquid.<br />

pH: Approx. 5.0 – 6.0.<br />

Viscosity (Brookfield: LV4; Speed 10):


Claims: Preservative free<br />

Elegant skin feel<br />

<strong>Natural</strong> Make Up Liquid Foundation<br />

21-19-1208<br />

Phase Ingredient INCI Supplier %<br />

A Deionised Water Aqua 56.05<br />

A1 Glycerol Glycerin Merck 4.00<br />

dermosoft ® GMCY Glyceryl Caprylate Dr. Straetmans 0.75<br />

dermosoft ® 688 ECO Parfum Dr. Straetmans 0.15<br />

dermofeel ® G 10 LW Polyglyceryl-10 Laurate, Aqua Dr. Straetmans 2.00<br />

A2 LaraCare A 200 Galactoarabinan Larex 1.00<br />

Keltrol RD Xanthan Gum CP Kelco 0.30<br />

A3 Titandioxid CI 77891 Kemira 7.80<br />

Sicovit Gelb 10 E IRON Oxides BASF 1.20<br />

Sicovit Rot 30E IRON Oxides BASF 0.20<br />

Sicovit Braun 70E IRON Oxides BASF 0.50<br />

Sicovit Schwarz 80E IRON Oxides BASF 0.10<br />

B Sweet Almond Oil (kbA)<br />

Prunus Amygdalus Dulcis (Sweet Almond)<br />

Oil<br />

Gustav Heess 8.00<br />

Apricot Kernel Oil (kbA) Prunus Armeniaca Kernel Oil Gustav Heess 4.00<br />

dermofeel ® sensolv Isoamyl Laurate Dr. Straetmans 8.00<br />

dermofeel ® GSC Glyceryl Stearate Citrate Dr. Straetmans 2.00<br />

Softisan 100 Hydrogenated Coco-Glycerides Sasol 1.50<br />

Arlacel 60V Sorbitan Stearate Uniqema 1.00<br />

Lanette 16 Cetyl Alcohol Cognis 1.00<br />

dermofeel ® Toco 70<br />

non-GMO<br />

Tocopherol, Helianthus Annuus<br />

(Sunflower) Seed Oil<br />

Dr. Straetmans 0.15<br />

C Mandarin Oil Citrus Nobilis (Mandarin Orange) Peel Oil Primavera 0.10<br />

Frag Highlight Natura Öko Parfum Düllberg 0.20<br />

Manufacturing Procedure:<br />

1. Heat deionised water of phase A to 80°C. Dissolve A1 and premix of A2.<br />

2. Blend premix of A3 until a homogenous mixture is obtained. Add A3 to phase A.<br />

3. Heat phase B up to 75°C. Emulsify phase B to phase A while stirring.<br />

Homogenize for 1-2 min using Ultra Turrax.<br />

4. Start to cool down under medium stirring.<br />

5. Cool down below 40°C. Add C. Adjust pH value if necessary.<br />

Specification Values:<br />

Appearance: Soft brown emulsion.<br />

pH: 5,0 – 5,5.<br />

Viscosity (Brookfield spindle 6, speed 10): 10.000 - 15.000 mPas.<br />

Centrifugation (15 min., 4.000 rpm): No separation.<br />

Stability: More than 3 months stable at 20°C, 40°C and 4°C.<br />

Microbiological Stability: Proven.<br />

100.00<br />

Disclaimer:<br />

The information contained herein is meant to demonstrate how our products can be used. The given data are suggestions without any<br />

guarantee aimed to support customers’ development. As production conditions at our customers’ facilities are beyond our control we<br />

refuse to accept any liability involved in the use of our products. Please observe possible third party patent rights.<br />

Other Formulations Page 39


<strong>Natural</strong> <strong>Deo</strong> Roll On Clear<br />

89-09-309<br />

Claims: Preservative free<br />

Perfume free<br />

dermosoft ® GMCY as deo active<br />

Phase Ingredient INCI Supplier %<br />

A Deionised Water Aqua 61.80<br />

A1 Genuvisco CI 123<br />

Chondrus Crispus,<br />

Carrageenan<br />

CP Kelco 0.15<br />

Keltrol CG-SFT Xanthan Gum CP Kelco 0.20<br />

A2 Glycerin 86% Glycerin 5.00<br />

Ajidew NL 5 Sodium PCA Ajinomoto 2.00<br />

B dermofeel ® G 5 O Polyglyceryl-5 Oleate Dr. Straetmans 1.00<br />

dermofeel ® G 10 LW<br />

Polyglyceryl-10 Laurate,<br />

Aqua<br />

Dr. Straetmans 4.00<br />

alpha Bisabolol, nat. Bisabolol GfN 0.10<br />

dermosoft ® GMCY Glyceryl Caprylate Dr. Straetmans 1.00<br />

Hydagen CAT Triethyl Citrate Cognis 1.00<br />

C <strong>Deo</strong>plex Organic<br />

Alcohol Alcohol 20.00<br />

Alcohol, Saccharomyces<br />

Ferment<br />

Carrubba 3.00<br />

Citric Acid (sol.20%) Citric Acid 0.75<br />

100.00<br />

Manufacturing Procedure (Cold processable):<br />

1. Dissolve A1 in water under high force stirring until homogenous gel is obtained.<br />

2. Add and dissolve ingredients of A2 one after the other.<br />

3. Premix phase B.<br />

4. It is recommended to pre-heat dermosoft ® GMCY up to 40°C to shorten the dissolving time.<br />

5. Add phase B slowly to phase A to avoid strings. Add part C.<br />

6. Adjust pH if necessary.<br />

Specification Values:<br />

Appearance: Clear colourless solution.<br />

pH-value: 4.0-4.8.<br />

Viscosity (Brookfield: Spindle 6; Speed 10): 1.000 – 2.000 mPa . s.<br />

Stability: More than 3 months stable at 20°C, 40°C and 4°C.<br />

Microbiological Stability: Proven.<br />

Disclaimer:<br />

The information contained herein is meant to demonstrate how our products can be used. The given data are suggestions without any<br />

guarantee aimed to support customers’ development. As production conditions at our customers’ facilities are beyond our control we<br />

refuse to accept any liability involved in the use of our products. Please observe possible third party patent rights.<br />

Page 40 Other Formulations


<strong>Natural</strong> <strong>Deo</strong> Roll On Milk<br />

90-09-309<br />

Claims: For sensitive skin<br />

Preservative free,<br />

Perfume free<br />

dermosoft ® GMCY as deo active<br />

Phase Ingredient INCI Supplier %<br />

A Deionised Water Aqua 83.25<br />

A1 Naviance Instant Maize Zea Mays (Corn) Starch National Starch 2.00<br />

A2 Keltrol CG-SFT Xanthan Gum CP Kelco 0.25<br />

A3 Glycerin 99,5% Glycerin 3.00<br />

B dermosoft ® GMCY Glyceryl Caprylate Dr. Straetmans 1.00<br />

Hydagen CAT Triethyl Citrate Cognis 5.00<br />

Tego <strong>Deo</strong> PY 88 Pellets Zinc Ricinoleate Evonik 1.50<br />

C <strong>Deo</strong>plex Organic<br />

Alcohol, Saccharomyces<br />

Ferment<br />

Carrubba 3.00<br />

Citric Acid (sol.20%) Citric Acid 1.00<br />

Manufacturing Procedure:<br />

1. Dissolve A1 in water of phase A while homogenizing for 2 min.<br />

2. Dissolve A2. in phase A, add A3 and heat up to 75°C.<br />

3. Heat phase B to 85°C. Emulsify B to A while stirring. Homogenize.<br />

4. Cool down to room-temperature<br />

5. Adjust pH if necessary.<br />

Specification Values:<br />

Appearance: White milk.<br />

pH-value: 4.2-4.6.<br />

Viscosity (Brookfield: Spindle 6; Speed 10): approx. 2000 mPa . s.<br />

Stability: More than 3 months stable at 20°C, 40°C and 4°C.<br />

Microbiological Stability: Proven.<br />

100.00<br />

Disclaimer:<br />

The information contained herein is meant to demonstrate how our products can be used. The given data are suggestions without any<br />

guarantee aimed to support customers’ development. As production conditions at our customers’ facilities are beyond our control we<br />

refuse to accept any liability involved in the use of our products. Please observe possible third party patent rights.<br />

Other Formulations Page 41


<strong>Natural</strong> Microemulsion Basic<br />

L004-03.25-607<br />

Claims: PEG-free transparent liquid<br />

Excellent self-emulsifying properties<br />

Suitable as wet-wipe concentrate, bath oil, cleansing oil<br />

Phase Ingredient INCI Supplier %<br />

A Deionised Water Aqua 9.00<br />

Karion F liquid Sorbitol Merck 17.00<br />

B Phytosqualan Squalane Sophim 20.00<br />

Tegosoft DC Decyl Cocoate Goldschmidt 31.50<br />

Dermosoft ® GMCY Glyceryl Caprylate Dr. Straetmans 4.00<br />

Dermofeel ® G 5 DO Polyglyceryl-5 Dioletate Dr. Straetmans 9.50<br />

Dermofeel ® G 10 DI<br />

Polyglyceryl-10<br />

Diisostearate<br />

Dr. Straetmans 9.00<br />

Manufacturing Procedure:<br />

1. Premix phase B under heating until all components are completely dissolved.<br />

2. Add phase A to phase B under stirring.<br />

3. Cool down to room temperature while stirring.<br />

Specification Values:<br />

Appearance: Clear yellow liquid.<br />

Viscosity (Brookfield: LV4; Speed 10):


<strong>Natural</strong> Microemulsion Bath Oil<br />

L004-5.20-308<br />

Claims: PEG-free transparent liquid<br />

Excellent self-emulsifying properties<br />

Moisturizing<br />

Phase Ingredient INCI Supplier %<br />

A Deionised Water Aqua 9.00<br />

Ajidew NL-50 Sodium PCA Ajinomoto 1.00<br />

dermosoft ® GMCY Glyceryl Caprylate Dr. Straetmans 1.50<br />

Karion F liquid Sorbitol Merck 19.00<br />

B Phytosqualan Squalane Sophim 20.00<br />

Jojoba Oil<br />

Simmondsia Chinensis<br />

(Jojoba) Seed Oil<br />

Gustav Heess 10.00<br />

Tegosoft DC Decyl Cocoate Evonik 20.00<br />

dermofeel ® G 5 DO Polyglyceryl-5 Dioletate Dr. Straetmans 9.50<br />

dermofeel ® G 10 DI<br />

Orange oil sweet KBA Ital.<br />

Polyglyceryl-10<br />

Diisostearate<br />

Citrus Aurantium Dulcis<br />

(Orange) Oil<br />

Dr. Straetmans 9.00<br />

Sencient 1.00<br />

Manufacturing Procedure:<br />

1. Premix phase B under light heating until all components are completely dissolved.<br />

2. Premix phase A and add to phase B under stirring.<br />

3. Cool down to room temperature while stirring.<br />

Specification Values:<br />

Appearance: Clear yellow liquid.<br />

Viscosity (Brookfield: Spindle 3; Speed 10):


Product List – Multifunctional Additives<br />

Product INCI-Registration Properties Appearance<br />

dermosoft ® 688 ECO Parfum fragrance component from natural raw materials powder<br />

dermosoft ® 700 B Parfum fragrance mixture of natural origin liquid<br />

dermosoft ® 747 Parfum natural fragrance component powder<br />

dermosoft ® 1388 ECO Parfum natural liquid fragrance composition liquid<br />

dermosoft ® GMCY Glyceryl Caprylate fatting agent, moisturizer, wetting agent of natural<br />

origin, deoactive (HLB: ~ 6,5)<br />

dermosoft ® GMC Glyceryl Caprate fatting agent, moisturizer, wetting agent of natural<br />

origin, deoactive (HLB: ~ 6,5)<br />

dermosoft ® DGMC Polyglyceryl-2 Caprate fatting agent, moisturizer, wetting agent of natural<br />

origin, deoactiv (HLB: ~ 9)<br />

dermosoft ® SLL Sodium Lauroyl Lactylate co-emulsifier from natural raw materials,<br />

deoactive(HLB: ~ 17)<br />

Product List – Antioxidants<br />

Page 44 Product List<br />

solid<br />

solid<br />

viscous liquid<br />

viscous liquid<br />

Product INCI-Registration Properties Appearance<br />

dermofeel ® Toco 70 Tocopherol, Helianthus Annuus<br />

(Sunflower) Seed Oil<br />

dermofeel ® Toco 70<br />

non-GMO<br />

dermofeel ® E 67<br />

non-GMO<br />

dermofeel ® E 74 A<br />

non-GMO<br />

dermofeel ® Ascorbyl<br />

Palmitate<br />

Tocopherol, Helianthus Annuus<br />

(Sunflower) Seed Oil<br />

Tocopherol, Helianthus Annuus<br />

(Sunflower) Seed Oil<br />

Tocopheryl Acetate, Helianthus<br />

Annuus (Sunflower) Seed Oil<br />

natural antioxidant for cosmetic<br />

formulations<br />

natural antioxidant for cosmetic<br />

formulations from non-GMO origin<br />

natural antioxidant for anti-aging<br />

concepts from non-GMO origin<br />

natural antioxidant for anti-aging<br />

concepts from non-GMO origin<br />

Ascorbyl Palmitate synergist for tocopherols from natural<br />

materials<br />

dermofeel ® PA Phytic Acid, Aqua natural chelating agent liquid<br />

dermofeel ® PA-3 Sodium Phytate, Aqua natural chelating agent liquid<br />

liquid<br />

liquid<br />

liquid<br />

liquid<br />

powder<br />

dermofeel ® Phenon 30 R Camelia Sinensis Leaf Extract green tea extract powder<br />

dermofeel ® Phenon 90 M Camelia Sinensis Leaf Extract green tea extract powder<br />

dermofeel ® Phenon EGCg Camelia Sinensis Leaf Extract green tea extract with a high level of<br />

epigallocatechin gallate<br />

Product List – Organic Ingredients<br />

powder<br />

Product INCI-Registration Properties Appearance<br />

dermorganics ® Glycerin Glycerin Glycerol from organic sources liquid<br />

dermorganics ® GSC Glyceryl Stearate Citrate emulsifier from organic sources solid<br />

dermorganics ® GMS-SE Glyceryl Stearate SE self emulsifying agent from organic sources solid


Product List – Oil Components<br />

Product INCI-Registration Properties Appearance<br />

dermofeel ® TC-7 Triheptanoin highly spreading, sliding, not fatting oil component<br />

of natural origin<br />

dermofeel ® MCT Tricaprylin highly spreading, sliding, not fatting oil component<br />

for versatile use. <strong>Natural</strong> origin<br />

dermofeel ® sensolv Isoamyl Laurate highly spreading, with elegant skin feeling for<br />

suncare and baby care. <strong>Natural</strong> origin<br />

Product List – Surfactants<br />

Product INCI-Registration Properties Appearance<br />

dermofeel ® G 6 CY Polyglyceryl-6 Caprylate non-PEG surfactant with good wetting<br />

properties, oil solubiliser<br />

dermofeel ® G 2 L Polyglyceryl-2 Laurate non-PEG texturizing agent, co-emulsifier,<br />

improvement of skinfeel (HLB: ~ 10)<br />

dermofeel ® G 5 L Polyglyceryl-5 Laurate non-PEG surfactant with good wetting<br />

properties, good oil solubiliser (HLB: ~ 13)<br />

dermofeel ® G 10 L Polyglyceryl-10 Laurate non-PEG surfactant with good wetting<br />

properties, good oil solubiliser (HLB: ~ 16)<br />

dermofeel ® G 10 LW Polyglyceryl-10 Laurate; Water non-PEG surfactant with good wetting<br />

properties, good oil solubilizer (HLB: ~ 16)<br />

dermofeel ® G 5 O Polyglyceryl-5 Oleate Polyglycerylester-emulsifier of natural origin for<br />

oil gels (HLB: ~ 11,5)<br />

dermofeel ® G 5 DO Polyglyceryl-5 Dioleate Polyglycerylester-emulsifier of natural origin<br />

(HLB: ~ 8)<br />

dermofeel ® G 10 DI Polyglyceryl-10 Diisostearate Polyglycerylester-emulsifier of natural origin<br />

(HLB: ~ 11)<br />

dermofeel ® PS Polyglyceryl-3 Stearate Polyglycerylester-emulsifier of natural origin for<br />

O/W emulsions (HLB: ~ 9)<br />

dermofeel ® PP Polyglyceryl-3 Palmitate Polyglycerylester-emulsifier of natural origin for<br />

O/W emulsions (HLB: ~ 9)<br />

dermofeel ® PR Polyglyceryl-3 polyricinoleate Polyglycerylester-emulsifier of natural origin for<br />

W/O emulsions (HLB: ~ 4)<br />

Product List Page 45<br />

liquid<br />

liquid<br />

liquid<br />

viscous liquid<br />

paste<br />

paste<br />

paste<br />

viscous liquid<br />

paste<br />

paste<br />

paste<br />

free flowing<br />

powder<br />

paste<br />

viscous liquid<br />

dermofeel ® PO Glyceryl Oleate Co-emulsifier (HLB: ~ 4), bodying agent solid white<br />

pellets<br />

dermofeel ® SL Sodium Stearoyl Lactylate Co-emulsifier,(HLB: ~ 17); improves skin feeling;<br />

Co-surfactant, improves foaming properties<br />

dermofeel ® GSC Glyceryl Stearate Citrate emulsifier of natural origin for O/W emulsions<br />

(HLB: ~ 10 – 12)<br />

symbio ® muls GC<br />

Glyceryl Stearate Citrate;<br />

Cetearyl Alcohol, Glyceryl<br />

Caprylate<br />

Product List – Hair Care<br />

easy to use emulsifying blend, for homogenous<br />

elegant creams and lotions. Can be used at low<br />

temperatures. <strong>Natural</strong> origin.<br />

powder<br />

powder<br />

Product INCI-Registration Properties Appearance<br />

dermofeel ® P-30 PCA Glyceryl Oleate specific improvement of emulsions and hair<br />

care products with conditioning and antistatic<br />

properties. Ecocert listed.<br />

Product List – Specialties<br />

Product INCI-Registration Properties Appearance<br />

pellets<br />

Flavikafine S Calcium Alginate water absorbing beads for decorative cosmetics powder<br />

liquid


<strong>Natural</strong> Preservation Guide for dermosoft ® products against bacteria, yeast and fungi<br />

Product INCI-Name Recommended Performance against<br />

Dosage [%] pH range gram+ gram- yeast mold<br />

dermosoft ® 688 ECO Parfum 0,05 – 0,3 < 5,5 � � � ��<br />

dermosoft ® 700 B Parfum 0,3 – 1,0 < 5,5 �� �� � �<br />

dermosoft ® 747 Parfum 0,05 – 0,3 < 5,5 � � � ��<br />

dermosoft ® 1388 ECO Parfum 2,5 – 4,0 < 5,5 �� �� � ��<br />

dermosoft ® GMCY Glyceryl Caprylate 0,5 – 1,0 5 - 7 �� �� �� �/�<br />

dermosoft ® GMC Glyceryl Caprate 1,0 – 2,0 5 - 7 �� � �� �<br />

dermosoft ® SLL Sodium Lauroyl Lactylate 0,5 – 2,0 5 - 7 �� �/� �� �<br />

Antimicrobial Performance:<br />

�� Very good<br />

� Fair<br />

�/� Moderate<br />

� Not sufficient<br />

The given performance information reflect our long term<br />

experience with the products in different applications.<br />

Combinations of the above mentioned materials in many<br />

cases exhibit synergistic effects. However, as the efficacy of<br />

an antimicrobial system strongly depends on the character of<br />

the formulation and the specific ingredients, the effectiveness<br />

of the chosen system has to be evaluated individually.<br />

Dr. Straetmans Chemische Produkte GmbH, Merkurring 60-62, D-22143 Hamburg, Germany<br />

T +49 (0)40-66 93 56-0, F +49 (0)40-66 93 56-310, info@dr-straetmans.de<br />

http://www.dr-straetmans.de

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!