Chain

Transmission Counterweight Sets
Key
1
1. Chain
2. Guide pulley
3. Anchor stud
4. End attachment link
Unlike link chains,
transmission chains are
exempt from annual annealing
requirements for this type of
application.
Guide Pulleys
Renold Part Stock Max Width Distance Chain Outside
Chain No Bore Bore Over Through Pitch Dia
No Flanges Boss Dia
A B C D E F
STANDARD ROLLER CHAINS
111046 661200 12 25 23 25 80.14 89
110046 661201* 12 25 28 32 85.98 95
110056 661202* 14 32 31 38 105.41 114
110066 661203* 19 35 38 45 126.37 140
110088 661204* 30 50 54 64 171.58 191
EXTENDED PITCH ROLLER CHAINS
113083 661201 12 25 28 32 85.98 95
113103 661202 14 32 31 38 105.41 114
113123 661203 19 35 38 45 126.37 140
113168 661204 30 50 54 64 171.58 191
*Sprockets can be supplied for use with these chains.
Anchor Studs
Renold Part Overall Length Thread Length Metric Thread Pin to
Chain No Max Max Size Shoulder Max
No G H J K
STANDARD ROLLER CHAINS
111046 661031 27 16.4 M8-1.25 5.72
110046 661032 32 20 M10-1.50 6.86
110056 661033 41 26 M12-1.75 7.82
110066 661034 44 26 M16-2.00 9.14
110088 661035 62 39 M20-2.50 11.81
EXTENDED PITCH ROLLER CHAINS
113083 661032 32 20 M10-1.50 6.86
113103 661033 41 26 M12-1.75 7.82
113123 661034 44 26 M16-2.00 9.14
113168 661035 62 39 M20-2.50 11.81
End Attachment Links
Renold Part Inside Pitch Stud Inner Plate Clearance
Chain No Width Dia Link Head
No Min Nom Max Head Max
L M N O P Q
111046 111046/230 7.6 19.05 8 5.8 17 19.0
110046 110046/230 11.4 19.05 8 5.8 18.3 24.0
110056 110056/230 13.4 25.40 10 6.7 21 27.0
110066 110066/230 15.7 31.75 11 7.8 26 30.0
110088 110088/230 25.6 38.10 16 10.3 35.4 42.5
Part No. 230 comprises end attachment link riveted to an inner link (No.4) and is supplied complete.
It is secured to chain by means of an outer link (No. 107).
76 engineering excellence www.renold.com