ETS application description - WindowMaster
ETS application description - WindowMaster
ETS application description - WindowMaster
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Motor controller, WEA11M<br />
KNX<br />
Application program <strong>description</strong><br />
25 July 2011<br />
2. Parameters<br />
2.1. General parameters common for all motor lines<br />
Parameter<br />
Description<br />
Actual position min. transmit interval time [sec.]<br />
Rules minimum retransmit interval of Actual Position for each motor line.<br />
Actual position will be transmitted if the position has changed, but this parameter rules how<br />
often the changes in position will be transmitted.<br />
Range 0: Disables transmission due to change.<br />
1 – 255: Equals 1 to 255 seconds.<br />
Parameter Objects to monitor<br />
Description WEA11M can monitor correct cyclic receives of different objects. This parameter rules which<br />
objects to monitor.<br />
Range None: No objects monitored.<br />
Maximum position:<br />
The maximum position object for each motor line is<br />
monitored.<br />
Close:<br />
The close object for each motor line is monitored.<br />
Max. position and close: The maximum position object and the close object for each<br />
motor line are monitored.<br />
Parameter<br />
Description<br />
Objects receive monitor time out [min.]<br />
This parameter determines how often updates on monitored objects must be received – if<br />
_______________________________________________________________________________________<br />
<strong>WindowMaster</strong> A/S<br />
5 | P a g e
Change language