CAICE Attenuator
CAICE Attenuator
CAICE Attenuator
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
SG - Splitter <strong>Attenuator</strong>s<br />
With Spigot Ends<br />
Rectangular duct attenuator, constructed from galvanised sheet<br />
steel, with splitter type acoustic elements. Side splitters fitted as<br />
standard to reduce noise breakout. Casing provided with spigot<br />
connections at both ends, suitable for slip jointing into adjoining<br />
ductwork.<br />
Options available:<br />
100, 125, 150, 175 or 200 wide side splitters only on smaller<br />
units, with 200 or 250 wide centre splitters on larger units<br />
Vertical or horizontal splitter orientation<br />
Melinex wrapped infill<br />
Internal and external paint finish<br />
Available Widths and Heights:<br />
End Connection Type<br />
Element Orientation<br />
High Pressure Casings<br />
Zero Pressure Casings<br />
W1 min H1 min W1 max H1 max W1 min H1 min W1 max H1 max<br />
Spigot ends Vertical or Horizontal 250 250 400 400 250 or 401 600 600<br />
For non-rated zero pressure casings, either the width or the height dimension must be at least 401mm.<br />
<strong>Attenuator</strong>s can be provided in 1mm increments within the width and height ranges shown above, although 25mm increments are<br />
standard.<br />
Available Lengths:<br />
End Connection Type<br />
L1<br />
Spigot ends 465, 615, 765, 915, 1065, 1215, 1365<br />
14<br />
www.caice.co.uk<br />
<strong>CAICE</strong> <strong>Attenuator</strong> Brochure