GLAzED-IN LOUVRES

gl azed-in louvres
3 2 7/ 1
Louvre with glass blades, single glazing
m a t e r i a l
c r o s s - s e c t i o n s
• Made from aluminium sections: AlMgSi 0.5
(according to EN 12020-2)
• Finishing: anodised in satin colour (20 microns) or
powder-coated in any RAL or Syntha Pulvin ® colour
(60-80 microns) (for UK min 40 microns)
• Glazing: float, safety glass, decorative glass, wired
glass: 6 mm thick
• Watertightness provided by two rubber strips
o p t i o n s
• Without glass
• Vertical version
• Manual or rod-actuated mechanical control, or electric,
hydraulic or air pressure control (left or right)
• Surround thickness: 20, 24, 28 or 32 mm
d i m e n s i o n s
• Blade height/length ratio: maximum 1/8
• Maximum opening angle: 78°
• Blades: all heights from 100 mm to 400 mm possible;
number of blades optional
• Frame thickness: 45 mm
• External sections have an angle of 7° to ensure water
runoff
327/1 327/1
with U-section
- 46 -
w w w . r e n s o n.eu