FS 3403 VRG - Flex
FS 3403 VRG - Flex FS 3403 VRG - Flex
FLEX Elektrowerkzeuge GmbH Bahnhofstrasse 15 D-71711 Steinheim/Murr Phone +49 7144 828-0 Fax +49 7144 25899 info@flex-tools.com www.flex-tools.com Floor and wall finishing FS 3403 VRG Order no. 333.611 The handy FLEX scouring machine for renovation work The small milling machine is suited to various tasks which arise during renovations, such as removing old plaster of up to 5 mm in thickness, milling the edges of concrete casings and mending small areas of insulation façades. The specially developed milling axle mounting guarantees even contact and uniform wear of the milling discs. This ensures the longest possible service life for the milling discs. Thanks to its modest weight it is also ideal for working over your head. Technical attributes Milling head Ø Working width Max. milling depth Speed without load Power input Power output Weight Standard equipment FS 3403 VRG 85 mm 76 mm 5 mm 1100-3700 rpm 1400 Watt 880 Watt 3,00 kg 12 flat tooth milling disc 333.719 1 bail handle 298.506 1 universal adapter 259.827 1 hexagon socket screw key 1 piece 1 Torx-wrench 1 piece 1 metal carrying case 334.073 Advantages at a glance · FLEX Six-fold microprocessor electronics: Speed selection, consistent speed control by tachometer generator, soft start, restart protection after power interruption, overload protection, and temperature monitoring · Optimal milling axle mounting: for the maximum service life of the twelve milling discs · Vacuum hood: with stepless height adjustment · Sturdy milling discs: from high quality solid carbide alloy · Vacuum attachment · Quality shut-off carbon brushes: if the carbon brushes wear down, the motor will be automatically switched off and thus protected from damage
FLEX Elektrowerkzeuge GmbH<br />
Bahnhofstrasse 15<br />
D-71711 Steinheim/Murr<br />
Phone +49 7144 828-0<br />
Fax +49 7144 25899<br />
info@flex-tools.com<br />
www.flex-tools.com<br />
Floor and wall finishing<br />
<strong>FS</strong> <strong>3403</strong> <strong>VRG</strong> Order no. 333.611<br />
The handy FLEX scouring machine for<br />
renovation work<br />
The small milling machine is suited to<br />
various tasks which arise during<br />
renovations, such as removing old plaster<br />
of up to 5 mm in thickness, milling the<br />
edges of concrete casings and mending<br />
small areas of insulation façades. The<br />
specially developed milling axle mounting<br />
guarantees even contact and uniform wear<br />
of the milling discs. This ensures the<br />
longest possible service life for the milling<br />
discs. Thanks to its modest weight it is<br />
also ideal for working over your head.<br />
Technical attributes<br />
Milling head Ø<br />
Working width<br />
Max. milling depth<br />
Speed without load<br />
Power input<br />
Power output<br />
Weight<br />
Standard equipment<br />
<strong>FS</strong> <strong>3403</strong> <strong>VRG</strong><br />
85 mm<br />
76 mm<br />
5 mm<br />
1100-3700 rpm<br />
1400 Watt<br />
880 Watt<br />
3,00 kg<br />
12 flat tooth milling disc 333.719<br />
1 bail handle 298.506<br />
1 universal adapter 259.827<br />
1 hexagon socket screw<br />
key<br />
1 piece<br />
1 Torx-wrench 1 piece<br />
1 metal carrying case 334.073<br />
Advantages at a glance<br />
· FLEX Six-fold microprocessor<br />
electronics: Speed selection,<br />
consistent speed control by<br />
tachometer generator, soft start,<br />
restart protection after power<br />
interruption, overload protection,<br />
and temperature monitoring<br />
· Optimal milling axle mounting: for<br />
the maximum service life of the<br />
twelve milling discs<br />
· Vacuum hood: with stepless height<br />
adjustment<br />
· Sturdy milling discs: from high<br />
quality solid carbide alloy<br />
· Vacuum attachment<br />
· Quality shut-off carbon brushes: if<br />
the carbon brushes wear down, the<br />
motor will be automatically switched<br />
off and thus protected from damage
FLEX Elektrowerkzeuge GmbH<br />
Bahnhofstrasse 15<br />
D-71711 Steinheim/Murr<br />
Phone +49 7144 828-0<br />
Fax +49 7144 25899<br />
info@flex-tools.com<br />
www.flex-tools.com<br />
Floor and wall finishing<br />
Accessories<br />
Carbide pointed tooth milling discs<br />
12 flat milling discs for replacement, made of solid carbide alloy.<br />
For light, soft plaster. Also for removing carpet adhesive residues<br />
when a clean, smooth base is required.<br />
QTY/PKG:<br />
Order no.<br />
12 333.719<br />
12 pointed milling discs for replacement, made of solid carbide<br />
alloy. For removing hard plaster and cement. For removing carpet<br />
adhesive residues when a roughened base is required.<br />
QTY/PKG:<br />
Order no.<br />
12 333.700<br />
Milling head complete<br />
To switch quickly from sharp to flat milling discs. Complete with<br />
twelve flat HM milling discs (order number 333.719).<br />
QTY/PKG:<br />
Order no.<br />
1 333.697<br />
To switch quickly from flat to sharp milling discs. Complete with<br />
twelve sharp HM milling discs (order number 333.700).<br />
QTY/PKG:<br />
Order no.<br />
1 333.689
Change language