Multicore Solder Bar

Technical Data Sheet
Multicore Solder Bar
October 2005
PRODUCT DESCRIPTION
Multicore solder bar is designed for use in applications that require
reliable, consistent soldering performance. The extremely low
impurity levels promote excellent wetting, giving optimum joint
strength & appearance. Defects are minimized, avoiding costly
rework. The lead-free alloys 96SC, 97SC & 99C alloys are fully
compliant with the requirements of the EU’s RoHS directive.
FEATURES AND BENEFITS
• Very low impurity levels giving excellent wetting & optimum
joint appearance
• Alloy exceed the requirements of relevant international
standards
• Lead impurity levels for lead free alloys over exceed market
requirement
TYPICAL PROPERTIES
Multicore Solder bar complies fully with the requirements of
J-STD006.
Element
96SC
(SAC387)
Sn 3.8Ag 0.7Cu
217°C
97SC
(SAC305)
Sn 3.0Ag 0.5Cu
217°C
99C
99.3Sn 0.7Cu
227°C
Sn63
Sn63 Pb37
183°C
Tin (Sn) - - - -
Silver (Ag) 3.6 – 4.0 2.8 – 3.2 0.05 0.05
Arsenic (As) 0.03 0.03 0.03 0.03
Bismuth (Bi) 0.1 0.05 0.1 0.1
Cadmium (Cd) 0.002 0.002 0.002 0.002
Copper (Cu) 0.6 – 0.8 0.4 – 0.6 0.45 – 0.9 0.08
Iron (Fe) 0.02 0.02 0.02 0.02
Lead (Pb) 0.05 0.05 0.05 -
Antimony (Sb) 0.1 0.1 0.05 0.05
Zinc (Zn) 0.001 0.001 0.001 0.003
Aluminium (Al) 0.001 0.001 0.001 0.005
Gold (Au) 0.005 0.005 0.005 0.005
Indium (In) 0.03 0.03 0.03 0.03
Nickel (Ni) 0.007 0.007 0.007 0.007
Multicore Product Range. The most common alloys are 96SC &
97SC for lead free process & Sn63 for tin-lead process, conforming
to the purity requirements of J-STD-006. Minimum order
requirements may be apply to certain alloys.
Test Specification Results
1 kg rectangle 305 x 31.8 x 19 mm Packed 20kg per case
bar
3.5kg bar with 483 x 38 x 19 mm Packed 600kg crates
loop
5 kg bar with 483 x 38 x 51 mm Packed 20kg per case
loop
Solid Wire (1) 3 mm Packed 20 kg per reel or
25, 50 kg drum packs
(1) For topping-up solder baths and pots automatically with minimum loss of temperature
HEALTH & SAFETY
WARNING: The following information is for guidance only. Users
must refer to the material Safety Data Sheets relevant to specific
Multicore alloy types before use.
Multicore solder bar do not present a risk to health & safety under
normal conditions of use. However, lead containing alloys may
present a health risk under non-standard operating conditions.
Eating, drinking & smoking should not be permitted in the working
area. Hands should be washed with soap & warm water after
handling solder, especially before eating.
MANUFACTURING CONTROL
Henkel supplies products of guaranteed reliability. This is achieved
by effective process control and verified by QC testing. All Multicore
solder bar are made with tested, traceable batches of alloys. We keep
retain samples of every batch of solder for a considerable period.
Our traceability system conforms to the demands of ISO9001 &
ISO/TS16949.
PRODUCT RANGE
Multicore solid alloys are available as bars, anodes and solder wires.
Multicore solder bar may be supplied in most solder alloys in the
NOT FOR PRODUCT SPECIFICATIONS
THE TECHNICAL INFORMATION CONTAINED herein IS INTENDED AS REFERENCE ONLY. PLEASE CONTACT HENKEL CORPORATION QUALITY DEPARTMENT
FOR ASSISTANCE AND RECOMMENDATIONS ON SPECIFICATIONS FOR THIS PRODUCT.

Multicore Solder Bar, October 2005
GENERAL INFORMATION
For safe handling information on this product, consult the
Material Safety Data Sheet, (MSDS).
Note
The data contained herein are furnished for information only and are believed
to be reliable. We cannot assume responsibility for the results obtained by
others over whose methods we have no control. It is the user's responsibility
to determine suitability for the user's purpose of any production methods
mentioned herein and to adopt such precautions as may be advisable for the
protection of property and of persons against any hazards that may be
involved in the handling and use thereof. In light of the foregoing, Henkel
Corporation specifically disclaims all warranties expressed or implied,
including warranties of merchantability or fitness for a particular
purpose, arising from sale or use of Henkel Corporation’s products.
Henkel Corporation specifically disclaims any liability for consequential
or incidental damages of any kind, including lost profits. The discussion
herein of various processes or compositions is not to be interpreted as
representation that they are free from domination of patents owned by others
or as a license under any Henkel Corporation patents that may cover such
processes or compositions. We recommend that each prospective user test his
proposed application before repetitive use, using this data as a guide. This
product may be covered by one or more United States or foreign patents or
patent applications.
Americas
Henkel Corporation
15350 Barranca Parkway
Irvine, CA 92618 USA
+1.949.789.2500
All trademarks, except where noted are the property of Henkel Corp.
Europe
Henkel Loctite Adhesives Ltd
Kelsey House, Wood Lane End
Hemel Hempstead
Hertfordshire HP2 4RQ, United Kingdom
+44 (0) 1442 278 000
Asia
Henkel Malaysia Sdn Bhd
Lot 62049 Jalan Portland
Tasek Industrial Estate,
31 400 Ipoh, Perak, Malaysia
+605 547 6811