Bomem-GRAMS User's Guide

More documents

Recommendations

Info

Appendix B Array Basic Interface Error ID Value Description ERR_FIRST_GAIN_INDEX 338 ERR_SECOND_GAIN_INDEX 339 ERR_FMGR_BUFFER_UNDERRUN 340 Buffer Underrun, missing some data. Increase the buffer size ERR_FMGR_SAVE_DATA 341 Error occurs when trying to save a new bunch of data to disk ERR_FMGR_DELETE_FILE 342 ERR_SATURATION_DET 343 ERR_SATURATION_IGRAM_AMP 344 ERR_SATURATION_OPT_CUTOFF 345 ERR_OPT_BEGIN_OVERSAMPLING 346 ERR_OPT_END_OVERSAMPLING 347 ERR_FILE_FORMAT 348 ERR_SE51_NEARIR_MODE 349 ERR_APOD 350 ERR_PHASE_APOD 351 ERR_INVALID_PATH 352 Invalid disk/directory specified ERR_BG_FILE_INTG_FAILED 353 Integrety of background file could not be verified ERR_PHASE_FILE_INTG_FAILED 354 Integrety of stored phase file could not be verified 44 Bomem-GRAMS User's Guide
APPENDIX C AUDIT LOG The spectrum files are saved without a key (i.e. without an eSignature). During acquisition, the integrity of the background or stored phase file is checked. If an integrity error occurs, an error is displayed to the user and added to the audit log. Each spectrum acquired by Bomem-GRAMS includes a block of information called the audit log. The audit log contains unalterable information about the file including the time the file was collected, the user, the instrument, the background or phase file (if applicable), etc., as well as all operations performed on the file. To view the audit log of a trace, select Trace Information in the File menu of Bomem-GRAMS, then click the Audit Log button. The following is an example of the audit log of a spectrum file: Local Time = 2002/08/29 12:43:09 UTC Time = 2002/08/29 16:43:09 Original File Name = C:\Program Files\Galactic\Data\test.SingleBeam.spc Logon name = WP User name = Warren Peace Instrument type = NetworkIR Instrument description = Test instrument22 Resolution = 4 cm-1 Speed = 66 scans/minute Sampling = 1 samples/fringe Detector = 1 Apodisation = Cosine Phase correction: Apodisation = Gaussian Resolution = 128 cm-1 Type = Normal Number of scans = 1 Number of measurements = 1 SUBFILE1 Local Time = 2002/08/29 12:43:11 UTC Time = 2002/08/29 16:43:11 Detector saturation = 0 Bad scans = 0 First stage gain = 1 Second stage gain = 2 Total experiment time = 0:00:27 Bomem-GRAMS User's Guide 45
Page 1:
Bomem-GRAMS User's Guide This manua
Page 4 and 5: No right to print, copy, in whole o
Page 7 and 8: T ABLE OF CONTENTS About this Manua
Page 9: ABOUT THIS M ANUAL Audience a This
Page 12 and 13: Section 1.1 Check the signal Figure
Page 14 and 15: Section 1.1 Check the signal Figure
Page 16 and 17: Section 1.3 Acquire a sample spectr
Page 19: CHAPTER 2 BOMEM-GRAMS 2.1 Descripti
Page 22 and 23: Section 3.2 Computer requirements 3
Page 24 and 25: Section 3.3 Software installation F
Page 26 and 27: Section 4.1 Description Parameter S
Page 28 and 29: Section 4.1 Description b The recom
Page 30 and 31: Section 4.1 Description • Buffer
Page 32 and 33: Section 4.1 Description Threshold d
Page 34 and 35: Section 4.1 Description Number Iden
Page 36 and 37: Section 4.1 Description j For trans
Page 38 and 39: Section 4.1 Description • Instrum
Page 40 and 41: Section 4.1 Description • Halt cu
Page 42 and 43: Appendix A Apodization Functions Na
Page 44 and 45: Appendix B Array Basic Interface Ar
Page 52 and 53: Appendix B Array Basic Interface Er
Page 57 and 58: APPENDIX D GLOSSARY Note: The follo
Page 59 and 60: Appendix D Glossary blank sample A
Page 61 and 62: Appendix D Glossary Fast Fourier tr
Page 63 and 64: Appendix D Glossary nonlinearity A
Page 65 and 66: Appendix D Glossary Lowering the re
Page 67 and 68: Appendix D Glossary The transmittan
Page 69: A Align............................
Page 72 and 73: general parameters initial delay...
Page 76: Analytical and Advanced Solutions 5
show all

Bomem-GRAMS User's Guide

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?