Bomem-GRAMS User's Guide

Appendix B
Array Basic Interface
Array Basic properties
OBJXCALL "TaskObj","APOD",,apod
OBJXCALL "TaskObj","PHASE",eval
OBJXCALL "TaskObj","PHASE",,phase
OBJXCALL "TaskObj","PHASEPTS",eval
OBJXCALL "TaskObj","IGRAMSIDE",eval
OBJXCALL "TaskObj","IGRAMDIR",eval
dim str(255) : OBJXCALL "TaskObj", "NAMEPHAS",
$str
OBJXCALL "TaskObj", "NAMEPHAS",, filename
OBJXCALL "TaskObj", "FIRST_STAGE_GAIN",eval
OBJXCALL "TaskObj", "FIRST_STAGE_GAIN",,
gain
OBJXCALL "TaskObj",
"SECOND_STAGE_GAIN",eval
OBJXCALL "TaskObj", "SECOND_STAGE_GAIN",,
gain
Description
Set the Apodization function type
0 = None (Boxcar)
1 = Triangular (or Bartlet)
2 = Weak Norton-Beer
3 = Medium Norton-Beer
4 = Strong Norton-Beer
5 = Happ-Genzel (or Hamming)
7 = Cosine
10 = Gaussian
12 = Blackman
Get the Phase correction type
0 - Self
3 - Stored phase
Set the Phase correction type
0 - Self
3 - Stored phase
Get the Number of interferogram points for phase correction
Get the Interferogram mode. 0 = double sided (0 scans!), 4 = double
interferogram
Get the Interferogram direction. Always 0 (bi-directional)
Get File name of phase array for Stored Phase
Set the File name of phase array for Stored Phase
Get the first stage preamplifier gain in use
0 - first gain value
1 - second gain value
2 - third gain value
3 - fourth gain value
Set the first stage gain
Get the second stage preamplifier gain in use
0 - gain = 1
1 - gain = 2
2 - gain = 4
3 - gain = 8
4 - gain = 16
Set the second stage gain
40 Bomem-GRAMS User's Guide