Bomem-GRAMS User's Guide
Bomem-GRAMS User's Guide
Bomem-GRAMS User's Guide
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Appendix B<br />
Array Basic Interface<br />
Array Basic methods<br />
OBJXCALL "TaskObj",<br />
"CONFIG_SPEC_PARAM", , apod, lwn, trhigh,<br />
trlow, abhigh, ablow, res, phaseapod,<br />
phasetype, phasename<br />
Sets spectroscopic parameters<br />
Parameters<br />
apod:<br />
Description<br />
apodization function to apply to the interferogram<br />
0 – Boxcar<br />
1 – Bartlet<br />
2 – Cosine (default)<br />
3 – Hamming<br />
4 – Blackman<br />
5 – Gaussian<br />
6 - Norton B weak<br />
7 - Norton B medium<br />
8 - Norton B strong<br />
lwn: laser wavenumber (default 15799.7)<br />
trhigh: Transmittance high cut-off, this is the highest value that<br />
any transmittance can have, any higher values are set to<br />
this value<br />
trlow: Transmittance low cut-off, this is the lowest value that<br />
any transmittance can have, any lower values are set to<br />
this value<br />
abhigh: Absorbance high cut-off, this is the highest value that<br />
any absorbance can have, any higher values are set to<br />
this value<br />
ablow: Absorbance low cut-off, this is the lowest value that any<br />
absorbance can have, any lower values are set to this<br />
value<br />
res: Resolution of the phase correction<br />
0 - 64 cm -1<br />
1 - 128 cm -1 (default)<br />
2 - 256 cm -1<br />
3 - 512 cm -1<br />
phaseapod: apodization function to apply to the phase<br />
interferogram<br />
0 - Boxcar<br />
1 - Bartlet<br />
2 - Cosine<br />
3 - Hamming<br />
4 - Blackman<br />
5 - Gaussian (default)<br />
6 - Norton B weak<br />
7 - Norton B medium<br />
8 - Norton B strong<br />
<strong>Bomem</strong>-<strong>GRAMS</strong> <strong>User's</strong> <strong>Guide</strong> 37