Bomem-GRAMS User's Guide

Appendix B
Array Basic Interface
Array Basic methods
OBJXCALL "TaskObj", "AUTOSCALE"
OBJXCALL "TaskObj", "COPYCOLLECT"
OBJXCALL "TaskObj", "BSETUP"
OBJXCALL "TaskObj", "BSCAN"
OBJXCALL "TaskObj", "KSETUP"
OBJXCALL "TaskObj", "KSCAN"
OBJXCALL "TaskObj", "ALIGN"
OBJXCALL "TaskObj", "AboutBomemGRAMS"
OBJXCALL "TaskObj",
"STATUS_AND_CONTROL"
OBJXCALL "TaskObj", "OnHelp"
OBJXCALL "TaskObj", "START_ALIGN", ,
sigma_min, sigma_max, direction, type, name
OBJXCALL "TaskObj", "START_BSCAN", ,
delay, scans, name, memo, use_autogain,
use_display
Description
Auto scale the data display to show data full scale
Copy the last displayed data to the Windows Clipboard
Call up the collect dialog; set for background scans
Run a background scan using the current settings
Call up the collect dialog; set for kinetics scans
Run a kinetics scan using the current settings
Start continuous acquisition to align accessories
Call up the About Bomem-GRAMS dialog
Call up the Instrument Status and Control dialog
Call up the main help of the system
Start continuous acquisition to align accessories
Parameters:
sigma_min: start of display range in cm -1
sigma_max: end of display range in cm -1
direction: 0 - only show direction 0
1 - only show direction 1
2 - show both directions
type: 0 - Interferogram
1 - Raw spectrum
2 -Transmittance
3 - Absorbance
name: The file name of the background. This is used if the type is
transmittance or absorbance
Run a background (reference) scan
Parameters
delay: delay in seconds before acquisition starts
scans: number of scans to acquire
name: file name to save data under, extension is always forced
to .background.spc
memo: comment to associate with this file
use_autogain: true or false field for use of autogain
use_display: true or false field for use of display during
acquisition
34 Bomem-GRAMS User's Guide