Bomem-GRAMS User's Guide

Chapter 4
The Collect Menu
A symbol indicates that the instrument is busy and thus not
available for connection.
• Timeout sets the longest delay the program will wait before declaring that
a hardware error has been detected.
• Computer Controlled indicates that the instrument responds to computer
commands. This parameter cannot be edited in the Hardware tab; it is edited
using the ABB FT-IR Control Panel applet.
• Detector selects the channel (detector) for which the first stage gain values
are displayed. Depending on the selected instrument, the valid range is 1 or 2,
or 1 to 64.
• Use First Stage Gain and Use Second Stage Gain indicate that the gains on
the first and second stages of the preamplifier are computer selectable. These
parameters cannot be edited in the Hardware tab; they are edited using
the ABB FT-IR Control Panel applet.
• Use Default restores the default values.
Parameter Setup: Spectroscopic Parameters
The Spectroscopic Parameters tab is used to change the way spectra are
calculated from the raw interferogram data.
Bomem-GRAMS User's Guide 17