G ess IRISH Sect4 - Hellermanntyton
G ess IRISH Sect4 - Hellermanntyton G ess IRISH Sect4 - Hellermanntyton
Minimum Lengths The minimum sleeve length provided is equal to the internal diameter of the tubing. For example, for a 5mm internal diameter tube of H material, the minimum cut length would be 5mm. Cable Protection Systems 4 Page 4.1 Non-Heatshrinkable Tubing 60-62 4.2 Lubricants & Applicator Tools 63 4.3 Heat Guns 64 4.4 Heatshrinkable Tubing 65-71 4.5 Power Cable Accessories 72-80 4.6 Braided Sleeving 81-84 4.7 Cable Protection 85-88 4.8 Trunking 89 4.9 Strapping & Beading 90 4.10 Edge Protection Grommets 91 59
60 4.1 Rubber Tubing Cable Protection Systems Non Heatshrinkable Tubing • Extensive range of tubing • Extruded from the highest-grade elastomeric compound • Excellent elasticity along with mechanical and electrical protection • The tubing can be stretched x5 in fitting and x2 in use • Can reduce your stock holding as one size of tube covers a wide range of cable diameters Helsyn 120 (H) Reference H Name Helsyn 120 Material Neoprene Rubber Min. Working Temperature 65ºC Max. Working Temperature 95ºC Intermittent Temperature 120ºC Proof Voltage 4kV Good Resistance To Mineral and Vegetable Oils, Aromatic Fuels, Acids, Alkalis, Material Specification BS3G198 Part 1 Type 1, Def Stan 59-15 Types D2a and D2c, BS3858 Type 1 Standard Colour Black Brown, red, orange, yellow, green, blue, violet, grey, white and pink available on request Applicator Tool and Hellerine see page 63 Helsyn 250 - Silicone Rubber (SLP) • Ideal for areas where higher temperatures and halogen free characteristics are required. (halogen free) ID Wall Helsyn 120 Cut Sleeves Reference ID Colour Pack Qty H12 x 20 1.2mm dia x 20mm long See Below 1000 100 H15 x 20 1.5mm dia x 20mm long See Below 1000 100 H20 x 20 2.0mm dia x 20mm long See Below 1000 100 H30 x 25 3.0mm dia x 25mm long See Below 1000 100 H50 x 25 5.0mm dia x 25mm long See Below 1000 100 H75 x 25 7.5mm dia x 25mm long See Below 1000 100 H100 x 25 10.0mm dia x 25mm long See Below 1000 100 H150 x 25 15.0mm dia x 25mm long See Below 1000 100 H200 x 25 20.0mm dia x 25mm long See Below 1000 100 All dimensions are in mm (nominal) and are subject to technical modification. Sleeving available in blue, black, brown, green, grey, orange, pink, red, violet, white, yellow. Other coil lengths available on request. Helsyn 250 (SLP) Reference SLP Name Helsyn 250 Wall Thickness (mm) 0.5mm Material Silicone Rubber Min. Working Temperature -65ºC Max. Working Temperature 180ºC Intermittent Temperature 250ºC Halogen Content Halogen Free Excellent Resistance To Moisture, Ozone, UV Good Resistance To Mineral and Vegetable Oils, Aromatic Fuels, Acids, Alkalis Material Specification BS3G198 Type 4, BS2848 Type 5 Class 180T, BS3858 Type 5, BS6746C, IEC304 Standard Colours Black or Red Reference ID Wall Thickness Colours Pack Qty SLP10 1.0mm 0.5mm Black or Red 25m SLP15 1.5mm 0.5mm Black or Red 25m SLP20 2.0mm 0.5mm Black or Red 25m SLP30 3.0mm 0.5mm Black or Red 25m SLP40 4.0mm 0.5mm Black or Red 25m SLP50 5.0mm 0.5mm Black or Red 25m All dimensions are in mm (nominal) and are subject to technical modification. Further colours available on request. T
- Page 4 and 5: V PVCB • Highly flexible PVC tubi
- Page 6 and 7: T Hellerine Hellerine M grade is a
- Page 8 and 9: Z Tredux With TREDUX; HellermannTyt
- Page 10 and 11: T TC30 TC30 is a great general purp
- Page 12 and 13: T HFT-A Polyolefin Heatshrink • C
- Page 14 and 15: T TA32 and TA42 Features and Benefi
- Page 16 and 17: S HEK Cable End Caps Features and B
- Page 18 and 19: S HAC Anode Cap Features and Benefi
- Page 20 and 21: S Medium Voltage Cable Terminations
- Page 22 and 23: S Medium Voltage Cable Joint Single
- Page 24 and 25: T Helagaine Braided Sleeving • He
- Page 26 and 27: T Helagaine HEGEMIP and HEGEMIPV0 B
- Page 28 and 29: Z Helawrap • Helawrap is a comple
- Page 30 and 31: R Flexible Conduit Systems Made to
- Page 32 and 33: T Open Slot Trunking Slotted trunki
- Page 34: T Edge Protection Grommets Features
Minimum Lengths<br />
The minimum sleeve length provided is equal to<br />
the internal diameter of the tubing. For example,<br />
for a 5mm internal diameter tube of H material,<br />
the minimum cut length would be 5mm.<br />
Cable Protection Systems<br />
4<br />
Page<br />
4.1 Non-Heatshrinkable Tubing 60-62<br />
4.2 Lubricants & Applicator Tools 63<br />
4.3 Heat Guns 64<br />
4.4 Heatshrinkable Tubing 65-71<br />
4.5 Power Cable Acc<strong>ess</strong>ories 72-80<br />
4.6 Braided Sleeving 81-84<br />
4.7 Cable Protection 85-88<br />
4.8 Trunking 89<br />
4.9 Strapping & Beading 90<br />
4.10 Edge Protection Grommets 91<br />
59
Change language