WORKSHOP MANUAL - lombardini service
WORKSHOP MANUAL - lombardini service
WORKSHOP MANUAL - lombardini service
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Fuel system<br />
7<br />
Injection pumps delivery balancing<br />
In case the balancing error read on the test pieces is greater than 2<br />
cm³/min, then injection pumps deliveries should be adjusted.<br />
Plate 4 and rod 3 are blocked by screws 1 and 2. Loosen them.<br />
Move plate 4 rightwards with respect to rod 3 if you want to<br />
increase delivery.<br />
If moved leftwards delivery decreases. Make very small movements<br />
with the plate.<br />
Tighten screws 1 and 2 at a torque of 1,1 Nm.<br />
Note: Each time a pump/injector is replaced it is necessary to<br />
balance the deliveries.<br />
160<br />
FOCS Workshop Manual_cod. 1.5302.858_1° ed_ rev. 00<br />
- 67 -
Change language