11.02.2015 Views

WORKSHOP MANUAL - lombardini service

WORKSHOP MANUAL - lombardini service

WORKSHOP MANUAL - lombardini service

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

5<br />

LUBRIFICATION CIRCUIT<br />

Danger – Attention<br />

- The engine can be damaged if allowed to operate with<br />

insufficient oil. It is also dangerous to add too much<br />

oil because its combustion may lead to a sharp<br />

increase in the rotation speed.<br />

- Use suitable oil in order to protect the engine.<br />

Nothing more than lubrication oil can influence the<br />

performances and life of an engine.<br />

- Use of an inferior quality oil or failure to regularly<br />

change the oil will increase the risk of piston seizure,<br />

will cause the piston rings to jam and will lead to rapid<br />

wear on the cylinder liner, the bearings and all other<br />

moving parts. Engine life will also be notably reduced.<br />

- The oil viscosity must suit the ambient temperature in<br />

which the engine operates.<br />

Danger – Attention<br />

- Old engine oil can cause skin cancer if repeatedly left in<br />

contact with the skin and for long periods of time.<br />

Wear protective gloves to avoid touching used oil.<br />

- If contact with the oil is unavoidable, you are advised to<br />

wash your hands with soap and water as soon as possible.<br />

Dispose of old oil in the correct way as it is highly polluting.<br />

LUBRIFICATION CIRCUIT<br />

124<br />

Components:<br />

1 Pressure gauge 9 Oil filler cap<br />

2 Rocker shaft 10 Camshaft<br />

3 Connecting rod pin 11 Oil pressure regulating valve<br />

4 Oil filter cartridge 12 Oil pump<br />

5 Journal 13 Crankshaft<br />

6 Oil drain plug 14 Oil suction filter<br />

7 Oil dipstick<br />

8 Bleed<br />

- 54 - FOCS Workshop Manual_cod. 1.5302.858_1° ed_ rev. 00

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!