WORKSHOP MANUAL - lombardini service

More documents

Recommendations

Info

2 Technical information MANUFACTURER AND ENGINE IDENTIFICATION Manufacturer identification Engine type Engine serial number Maximum operating speed Number of the customer version (form K) Approval data - 14 - FOCS Workshop Manual_cod. 1.5302.858_1° ed_ rev. 00
Technical information 2 ENGINE TYPE Cylinders Bore Stroke Displacements Compression rate Rpm Maximum power N 80/1269/CEE-ISO 1585-DIN 70020 Maximum torque Specific fuel consumption** Oil consumption ** Dry weight of engine Combustion air volume at 3600 Rpm Cooling air volume at 3600 Rpm Axial load allowed on crankshaft (both directions) Max tilt Instant operation (up to 1 min) Intermittent operation (up to 30 min) N° mm mm Cm³ Nm RPM g/KWh Kg/h Kg l./1' m³/min Kg. α α LDW 1003 3 75 77.6 1028 22,8:1 3600 19 58 @ 2200 300 0,013 87 1850 63 300 35° 25° ** At max. power FOCS Workshop Manual_cod. 1.5302.858_1° ed_ rev. 00 - 15 -
Page 1: WORKSHOP MANUAL 1003 FOCS Engine Se
Page 4 and 5: - REGISTRATION OF MODIFICATIONS TO
Page 6 and 7: - Chapter index Cylinder head tight
Page 8 and 9: - Chapter index Pump/injector unit
Page 10 and 11: 1 General remarks and safety inform
Page 12 and 13: 2 TECHNICAL INFORMATION TROUBLE SHO
Page 16 and 17: 2 Technical information PERFORMANCE
Page 18 and 19: 3 MAINTENANCE - RECOMMENDED OIL TYP
Page 20 and 21: 3 Maintenance - Recommended oil typ
Page 22 and 23: 4 DISASSEMBLY / REASSEMBLY RECOMMEN
Page 24 and 25: 4 Disassembly / Reassembly E.G.R. C
Page 26 and 27: 4 Disassembly / Reassembly Flywheel
Page 28 and 29: 4 Disassembly / Reassembly Cranksha
Page 30 and 31: 4 Disassembly / Reassembly Valve ti
Page 32 and 33: 4 Disassembly / Reassembly OIL PUMP
Page 34 and 35: 4 Disassembly / Reassembly Injectio
Page 36 and 37: 4 Disassembly / Reassembly 54 55 CA
Page 38 and 39: 4 Disassembly / Reassembly VALVES T
Page 40 and 41: 4 Disassembly / Reassembly Valve se
Page 42 and 43: 4 Disassembly / Reassembly PISTON R
Page 44 and 45: 4 Disassembly / Reassembly 91 92 Pi
Page 46 and 47: 4 Disassembly / Reassembly CONNECTI
Page 48 and 49: 4 Disassembly / Reassembly Central
Page 50 and 51: 4 Disassembly / Reassembly Cranksha
Page 52 and 53: 4 Disassembly / Reassembly . ......
Page 54 and 55: 5 LUBRIFICATION CIRCUIT Danger - At
Page 56 and 57: 5 Lubrification circuit Oil pressur
Page 58 and 59: 6 COOLANT CIRCUIT Danger - Attentio
Page 60 and 61: 7 FUEL SYSTEM Fuel feeding / inject
Page 62 and 63: 7 Fuel system Plunger barrel ring n
Page 64 and 65:
7 Fuel system Setting of injector R
Page 66 and 67:
7 Fuel system Static injection adva
Page 68 and 69:
8 ELECTRIC SYSTEM Alternator, 14V 3
Page 70 and 71:
8 Electric System STARTER MOTOR - B
Page 72 and 73:
8 Electric System Oil pressure swit
Page 74 and 75:
9 SETTINGS SPEED SETTINGS Setting t
Page 76 and 77:
9 Settings Pump/injector unit deliv
Page 78 and 79:
10 STORAGE ENGINE STORAGE - When th
Page 80 and 81:
11 TORQUE SPECIFICATIONS AND USE OF
Page 82 and 83:
12 SPECIAL TOOLS SPECIAL TOOLS DESC
Page 84:
- Notes . .........................
show all

WORKSHOP MANUAL - lombardini service

Create successful ePaper yourself

Delete template?

Save as template?