Operating manual 27.09.2011 CC Heating Thermostats - HUBER
Operating manual 27.09.2011 CC Heating Thermostats - HUBER
Operating manual 27.09.2011 CC Heating Thermostats - HUBER
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
-143<br />
-144<br />
-148<br />
-149<br />
-150<br />
-151<br />
-152<br />
-153<br />
-154<br />
-155<br />
-201<br />
-202<br />
-204<br />
-215<br />
-216<br />
-1027<br />
-1029<br />
-2048<br />
The LT Pressostat has operated<br />
The MT Pressostat has operated<br />
Reporting contact of the pump<br />
has triggered<br />
Phase Relay for the pump motor<br />
has triggered<br />
HT Compressor gas outlet temp.<br />
sensor faulty<br />
LT Compressor gas outlet temp.<br />
faulty<br />
Thermal contact of the pump<br />
has triggered<br />
Temperature of the HT<br />
compressor is too high<br />
Temperature of the NT<br />
compressor too high<br />
HT compressor Oil pressure is<br />
too low.<br />
HT compressor gas outlet<br />
temperature to high.<br />
LT compressor gas outlet<br />
temperature to high.<br />
Motor protection switch has<br />
triggered by Over-temperature<br />
Motor protection switch has<br />
triggered by OT in Main-heating.<br />
Motor protection switch has<br />
triggered by OT in Fine-heating<br />
No pressure increase since pump<br />
start. Is pump dry?<br />
Level error: Liquid level too low<br />
Internal actual value has<br />
exceeded alarm temperature<br />
Please contact us or our service partners<br />
Please contact us or our service partners<br />
Please contact us or our service partners<br />
Right-hand (3 phase, 400V) rotation of the power supply<br />
is not available. Please connect to right-hand rotation.<br />
Please contact us or our service partners<br />
Please contact us or our service partners<br />
Possible viscosity problem of the thermal fluid (viscosity is<br />
too high)<br />
Please contact us or our service partners<br />
Please contact us or our service partners<br />
Please contact us or our service partners<br />
Please contact us or our service partners<br />
Please contact us or our service partners<br />
Please contact us or our service partners<br />
Please contact us or our service partners<br />
Please contact us or our service partners<br />
Possibly insufficient thermal fluid in the circuit. Fill in<br />
thermal fluid and air-purge.<br />
Possibly insufficient thermal fluid in the circuit. Fill in<br />
thermal fluid and air-purge.<br />
Please contact us or our service partners<br />
85