Operating manual 27.09.2011 CC Heating Thermostats - HUBER
Operating manual 27.09.2011 CC Heating Thermostats - HUBER
Operating manual 27.09.2011 CC Heating Thermostats - HUBER
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Specific functions Com.G@te<br />
(internal version)<br />
(external version)<br />
74<br />
1<br />
2<br />
3 1<br />
2<br />
3<br />
5<br />
4<br />
1 3<br />
2<br />
6<br />
3<br />
2<br />
1<br />
5<br />
6<br />
1<br />
4 2<br />
3<br />
3<br />
2<br />
1<br />
3 1<br />
2<br />
5<br />
1<br />
9 6<br />
5<br />
1<br />
9 6<br />
The signal connectors have been designed according to the NAMUR standard<br />
AIF Reg-E-Prog Socket<br />
The analogue interface, one input channel (programmable, option current or voltage<br />
signal possible) and 3 output channels (1 programmable).<br />
The analogue interface of the Com.G@te is programmed in the Main menu. Please also<br />
read the description concerning the analogue interface in the section of the<br />
Com.G@te menu.<br />
Pin Signal<br />
1. Current output, T external 0/4-20mA oder 0-10V<br />
2. Current output, set-point 0/4-20mA oder 0-10V<br />
3. GND for analogue outputs GND<br />
4. Analogue input (programmable) 0/4-20mA oder 0-10V<br />
5. Current output, free programmable 0/4-20mA oder 0-10V<br />
6. GND for analogue input GND<br />
Further to the connections described under Com.G@te (internal version) the Com.G@te<br />
(external version) offers an external level monitoring (LEVEL) connection.<br />
Level Socket<br />
For level monitoring in the sight glass.<br />
This connection offers the option of connecting an external float switch (Order No.<br />
#6152), which is fitted in the sight glass in order to monitor the level of your external<br />
closed application.