Operating manual 27.09.2011 CC Heating Thermostats - HUBER
Operating manual 27.09.2011 CC Heating Thermostats - HUBER
Operating manual 27.09.2011 CC Heating Thermostats - HUBER
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Ending <strong>CC</strong> Temperature control<br />
The temperature control can be ended at any time by pressing the function key T3 (65).<br />
The temperature control and circulation is immediately stopped. Alternatively, to set the<br />
unit to standby mode and use the main menu point Start & Stop - menu point Stop<br />
temperature control.<br />
For units with compressor:<br />
The main switch (36) can be used to turn the power off only after the compressor has<br />
been stopped by the controller.<br />
Room temperature should be reached before the temperature control is ended.<br />
Protect your application by NOT closing any isolation and drain valves. Overpressure /<br />
underpressure can be built up within the system if valves are closed and temperature<br />
adjustment takes place.<br />
65