Operating manual 27.09.2011 CC Heating Thermostats - HUBER
Operating manual 27.09.2011 CC Heating Thermostats - HUBER
Operating manual 27.09.2011 CC Heating Thermostats - HUBER
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
User menu – config.<br />
Using this main menu point up to seven different operational modes (user modes) can<br />
be set up. This is comparable to the main menu point Compact menu. However here the<br />
user menu can be stopped and edited at any time. There is also the ability for an<br />
administrator to create and save menu lists for individual users. Reducing the number of<br />
options in a list can give a clearer display and overview of the operation, as well<br />
increase security by locking out other functions. A user menu can only be selected if<br />
the administrator has entered the correct password (figure between 0 an 65535). The<br />
standard password is 0. It is up to the administrator to change the password. Contact<br />
our Customer Support if the password has been forgotten.<br />
Please note that the User menu – configuration is password (code input) protected.<br />
The path to select the main menu point User menu – config. is as follows:<br />
Comfort Menu:<br />
.<br />
User meu – config.<br />
.<br />
NOTICE<br />
Enter the Admin password,<br />
please. The standard<br />
password is 0.<br />
Please enter code<br />
Actual setting: 0000<br />
Max. setting 65535<br />
Min. setting 0000<br />
New value: 0<br />
ESC OK KEYB<br />
USER MENU – CONFIG.:<br />
User menu 1<br />
User menu 2<br />
User menu 3<br />
User menu 4<br />
User menu 5<br />
User menu 6<br />
User menu 7<br />
Password<br />
Return to main menu<br />
CONFIGURATION: User menu 1<br />
Analogue interface +<br />
Display modes +<br />
Auto-Start +<br />
Limits +<br />
Digital interface +<br />
Real time clock +<br />
.<br />
.<br />
.<br />
.<br />
.<br />
After entering the password (code input), select one of the available user menus to<br />
enter the configuration program. After that you will enter the actual configuration<br />
program. A list of the comfort menu will be displayed. At the end of each line there will<br />
be a “+” if that function is active. This can be changed to a “-“ using the control<br />
button / knob (61) to deactivate it.<br />
55