Operating manual 27.09.2011 CC Heating Thermostats - HUBER
Operating manual 27.09.2011 CC Heating Thermostats - HUBER
Operating manual 27.09.2011 CC Heating Thermostats - HUBER
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Quick guide for <strong>CC</strong>-thermostats<br />
Checklist for initial operation:<br />
1. Make sure that the machine is connected correctly and enough thermal fluid is<br />
inside.<br />
2. Switch on the unit via the mains switch!<br />
3. Make sure that the over-temperature is set correctly.<br />
4. Make sure that the set-point limits (min and max) are set correctly.<br />
5. Enter e.g. a new set-point!<br />
6. Make sure that you have set the correct temperature control mode (e.g.process)!<br />
7. Start temperature control!<br />
Operation:<br />
T-set button<br />
Press this button to<br />
enter a new setpoint.<br />
Compact menu:<br />
Display modes � Here you can select the graphic display.<br />
Comfort menu � Here one can have displayed the whole menu function.<br />
Program edit � Here you can edit a temperature program.<br />
Program start & stop � Here you can start / stop a temperature program.<br />
Pump settings � Here you can predefine a pump speed.<br />
Start ramp� Here you can predefine a temperature ramp.<br />
Control parameters � Here you can select/predefine control parameters.<br />
Set-point � Here you can predefine a set-point.<br />
Set-point limits � Here you can set set-point limits.<br />
Start&Stop � Here you can start / stop temperature control.<br />
Temperature control mode � Here you can select between jacket / process control<br />
Over-temp. Protection � Here you can set the over-temperature protection.<br />
Select user menu � Here you can select an individual menu.<br />
Exit �<br />
Button for main menu and menu selection.<br />
By pressing the rotary knob / encoder you can reach the<br />
compact menu with above mentioned functions.<br />
ESCAPE-Button<br />
To cancel a process (entry), press the ESC button.<br />
START / STOP-Button<br />
Here you can start / stop circulation, air-purge and<br />
thermoregulation.<br />
Setting the over-temperature protection:<br />
1. Select the function over-temperature from the compact menu!<br />
2. Select the menu point, setting the over-temperature protection!<br />
3. To adjust the over-temperature a code is being given out via the display for<br />
several seconds.<br />
4. You are being requested to enter a code!<br />
5. Enter the code which has been displayed previously!<br />
6. The over-temperature can be adjusted if the code has been entered correctly!<br />
7. The new over-temperature value will be now displayed!<br />
5
Change language