Operating manual 27.09.2011 CC Heating Thermostats - HUBER

More documents

Recommendations

Info

32 Please enter Crystalisation 1 2 3 4 5 6 7 8 9 0 q w e r t z u i o p ü a s d f g h j k l l ö ä y x c n m COMPACT MENU: . . Enter program . . Select Program: Program 1 . Program 10 Return to main menu Program 01 contains 00 segments SELECT ITEM: Segments Segments (List) End condition Input program name Delete program Return AT PROGRAM-END: Stop temperature control Continue tmp. control Repeat Return Segment 1 Seg.: 1 2 3 4 5 SP: 20,00°C Time/min: 1 Mode: internal Stability: Temp AIF OUT: off AIF%:0 Funct.: linear Tconst./ min 0 POCO: off DEL INS BACK Segment 1 Seg.: 1 2 3 4 5 SP: 20,00°C Time/min: 1 Mode: internal Stability: Temp AIF OUT: off AIF%:0 Funct.: linear Tconst. / min 0 POCO: off Save Seg. SP: time Mode: Stab. 1 25,00 1 intern time 2 30,00 5 process Temp press+turn to change column DEL INS BACK
To create a new program, continue as follows: 1. Select the menu point Enter program from the Compact / Comfort menu. 2. Select the program number to be used. Information on the number of segments from the program currently used etc is shown in the lower part of the graphic display screen (60). 3. After having selected the program to be edited you are being offered several functions. Normally you would start with the sub menu a. Segments. Confirm by pressing the key / rotary knob (61). The cursor (frame) first indicates the set-point (SP). By turning the key / rotary knob (61) the individual functions such as (segment time, temperature control mode…) can be chosen. The activated function (frame) can be modified and saved by turning to the desired value and pressing the key / rotary knob (61). Please note, that when selecting an exponential ramp function (E-Grade Professional) the end value (more precisely 99% of the end value) will be reached after 5 times the time constant has elapsed. After having made all inputs select “SAVE” and confirm by pressing the key / rotary knob (61) to save the segment. By means of the function (soft-key) “DEL”, “INS” and “BACK” segments may be inserted easily and deleted. Choose the segment to be deleted by turning the key / rotary knob (61) or to insert a new segment. or b. Segments (List). The main functions set-point (SP), time, mode and stability are listed for entry and modification. Lines are being chosen by turning the key / rotary knob (61) and columns by simultaneously turning and pressing of the key / rotary knob (61). The activated function (frame) can be modified and saved by pressing further turning to the desired value and pressing again the key / rotary knob (61). By means of the function (soft-key) “DEL”, “INS” and “BACK” segments may be easily inserted and deleted. Choose the segment to be deleted by turning the key / rotary knob (61) or to insert a new segment. 4. Via the sub menu point End condition, available options for the end of the program (e.g. Stop temperature control, or Continue temperature control) can be chosen. 5. A new program name can be entered from the menu point Input program name by means of the keys from the touch screen (60). 6. To delete a program, use the Delete program option from the sub menu. 7. After entering a program, the Program start & stop option from the main menu can be used to call up, run and stop it. An early stop to the program can also be achieved by selecting the main menu point Program start & stop. 33
Page 1 and 2: Valid for: Operating manual CC 27.0
Page 3 and 4: Filling and air purging an external
Page 5 and 6: Quick guide for CC-thermostats Chec
Page 7 and 8: Chapter 1: Safety In this chapter i
Page 9 and 10: Intended Use and General Safety Ins
Page 11 and 12: Duties of responsible person The op
Page 13 and 14: To 1. Temperature control machines
Page 15 and 16: Operating conditions Please make su
Page 17 and 18: Chapter 2: Electronics and operatio
Page 19 and 20: Information Displays CC The followi
Page 21 and 22: Field 10: Display delta T This fiel
Page 23 and 24: Operation CC Please note, there are
Page 25 and 26: CC Operation using the simulated Nu
Page 27 and 28: Compact menu Control parameters: Th
Page 29 and 30: 2. With preliminary Test: To achiev
Page 31: Example: Indication when choosing L
Page 35 and 36: Comfort menu Acoustic alarm Here yo
Page 37 and 38: Enter program A description on this
Page 39 and 40: Warning time level As low-level pro
Page 41 and 42: Time scale The time display can be
Page 43 and 44: Analogue Interface AIF INPUT FUNCTI
Page 45 and 46: Settings: 1. Settings on temperatur
Page 47 and 48: POCO alarm Pot. free Contact (POCO)
Page 49 and 50: Function Numbers and their meaning
Page 51 and 52: F30 Set date Setting the date. F31
Page 53 and 54: F90 Language / Sprache Selecting th
Page 55 and 56: User menu - config. Using this main
Page 57 and 58: Chapter 3: Connect the machine, fil
Page 59 and 60: Counter cooling (valid for CC Heati
Page 61 and 62: Switching on the temperature contro
Page 63 and 64: Setting the safety value: Select th
Page 65 and 66: Ending CC Temperature control The t
Page 67 and 68: Draining the machine and an externa
Page 69 and 70: Interface modules (RS232/SERIAL, Co
Page 71 and 72: The following interfaces are availa
Page 73 and 74: RS232 / RS485 Serial Socket A PC, P
Page 75 and 76: Pin Designation 1 Level Test (Bridg
Page 77 and 78: USB Device The operating mode of th
Page 79 and 80: Firmware update: Updates and error
Page 81 and 82: Messages Messages which occur can b
Page 83 and 84:
Alarm and Warning codes Hard Alarms
Page 85 and 86:
-143 -144 -148 -149 -150 -151 -152
Page 87 and 88:
Maintenance Danger! Prior to carrin
Page 89 and 90:
Chapter 6: Taking the machine out o
Page 91 and 92:
Transport The unit is now decommiss
show all

Operating manual 27.09.2011 CC Heating Thermostats - HUBER

Create successful ePaper yourself

Delete template?

Save as template?