Operating manual 27.09.2011 CC Heating Thermostats - HUBER
Operating manual 27.09.2011 CC Heating Thermostats - HUBER Operating manual 27.09.2011 CC Heating Thermostats - HUBER
CC Operation using the rotary knob 24 Compact menu Display functions Comfort menu Enter program Program start & stop Pump settings Start ramp Control parameters Set-point Set-point limits Start & stop Temperature control mode Over-temperature protection User menu-select Once the rotary knob / key (61) has been pressed, the compact menu appears on the display screen. This menu lists the most commonly used options in alphabetical order. Turn the rotary knob / key (61) to highlight the required function and then press the knob to activate that function. An overview of these menu options is given in the Main menu chapter. Depending on the E-grade level, an upgrade can be made at any time with lower and middle levels, and the appropriate menu points will be displayed in the Graphic display (60). Please contact us at +49(0)781-9603100 or per e-mail under info@huber-online.com concerning information regarding upgrades.
CC Operation using the simulated Number Pad Function number menu Keyboard Function number 0 Set-point New value F 0 Set-point ^ v 1 2 3 4 5 6 7 8 9 ESC 0 OK Maximum value 50.00 Minimum value -20.00 1 2 3 4 5 6 7 8 9 . 0 - ESC OK
- Page 1 and 2: Valid for: Operating manual CC 27.0
- Page 3 and 4: Filling and air purging an external
- Page 5 and 6: Quick guide for CC-thermostats Chec
- Page 7 and 8: Chapter 1: Safety In this chapter i
- Page 9 and 10: Intended Use and General Safety Ins
- Page 11 and 12: Duties of responsible person The op
- Page 13 and 14: To 1. Temperature control machines
- Page 15 and 16: Operating conditions Please make su
- Page 17 and 18: Chapter 2: Electronics and operatio
- Page 19 and 20: Information Displays CC The followi
- Page 21 and 22: Field 10: Display delta T This fiel
- Page 23: Operation CC Please note, there are
- Page 27 and 28: Compact menu Control parameters: Th
- Page 29 and 30: 2. With preliminary Test: To achiev
- Page 31 and 32: Example: Indication when choosing L
- Page 33 and 34: To create a new program, continue a
- Page 35 and 36: Comfort menu Acoustic alarm Here yo
- Page 37 and 38: Enter program A description on this
- Page 39 and 40: Warning time level As low-level pro
- Page 41 and 42: Time scale The time display can be
- Page 43 and 44: Analogue Interface AIF INPUT FUNCTI
- Page 45 and 46: Settings: 1. Settings on temperatur
- Page 47 and 48: POCO alarm Pot. free Contact (POCO)
- Page 49 and 50: Function Numbers and their meaning
- Page 51 and 52: F30 Set date Setting the date. F31
- Page 53 and 54: F90 Language / Sprache Selecting th
- Page 55 and 56: User menu - config. Using this main
- Page 57 and 58: Chapter 3: Connect the machine, fil
- Page 59 and 60: Counter cooling (valid for CC Heati
- Page 61 and 62: Switching on the temperature contro
- Page 63 and 64: Setting the safety value: Select th
- Page 65 and 66: Ending CC Temperature control The t
- Page 67 and 68: Draining the machine and an externa
- Page 69 and 70: Interface modules (RS232/SERIAL, Co
- Page 71 and 72: The following interfaces are availa
- Page 73 and 74: RS232 / RS485 Serial Socket A PC, P
<strong>CC</strong> Operation using the simulated Number Pad<br />
Function number menu Keyboard<br />
Function number 0<br />
Set-point<br />
New value<br />
F 0 Set-point<br />
^ v<br />
1 2 3<br />
4 5 6<br />
7 8 9<br />
ESC 0 OK<br />
Maximum value 50.00<br />
Minimum value -20.00<br />
1 2 3<br />
4 5 6<br />
7 8 9<br />
. 0 -<br />
ESC OK