Operating manual 27.09.2011 CC Heating Thermostats - HUBER

More documents

Recommendations

Info

Description of individual Fields Field 1: Display Current value This field shows the current internal temperature of the unit and, if an external sensor is connected, the current process temperature. Field 2: Display set-point This field displays the current set-point. Field 3: Display Graphic temperature This field shows the internal and process temperatures in graphical format. The span of the temperature axis is between the minimum (see field 7) and maximum set-point limits (see also field 10). Field 4: Display Status Field This field shows useful information such as the current temperature control mode (internal or process), unit operations (degassing, air-purging) and active control loops. Field 5: Display Soft-keys operation This field enables various functions. Please therefore note the soft keys (63, 64, 65) located directly under the relevant touch screen buttons. The Function Number menu can be displayed by lightly touching the soft key 63 Funct.-no area of the screen. Please refer to the Function Numbers and Definitions chapter for more details. Pressing the soft key (64) Tset F(0) area of the screen will bring up the option to enter a new set-point. Pressing the soft key 65 Start of the screen will bring up the Start & Stop menu. This menu allows the temperature control, air-purging, circulation and degassing to be started as required. After an operation, the menu will return to the standard screen. Instead of the function Start in field 5 the function stop is now available. Pressing the soft key 65 Start of the screen will bring up the Start & Stop menu again. By pressing the Start area again, any operations previously started may be stopped. Field 6: Display Help Help (general information / trouble-shooting information) will be displayed. Field 7: Display minimum set-point This field displays the current minimum set-point limit (corresponds to Funct. no. F1). The minimum set-point also serves as the lower temperature limit for the graphic temperature display, in Field 3. Field 8: Pump and Level information This field displays the level as well as pump status including pump speed indication (only for temperature control devices with speed regulation). Field 9: Display maximum set-point This field displays the current maximum set-point limit (corresponds to Funct. no. F2). The minimum set-point also serves as the upper temperature limit for the graphic temperature display, in Field 3. 20
Field 10: Display delta T This field displays the delta T value (max. admissible difference between process and internal temperature). This value may be set within a range of 0…100K under the main menu point limits / delta T limits. This field is active only with a connected process sensor and when the temperature control mode process temperature is activated. Field 11: Display Over-temperature cut-off This field displays the current setting of the over-temperature cut-off. Please note that this value can only be changed through the Main menu Over-temperature. Please refer to the Setting the over-temperature chapter in the Main menu. Field 12: Display Alarm and Warning messages This field displays information on any alarm or warning conditions that are present. Alarm and warning messages are also immediately displayed as text in the graphic display (60). Field 13: Display Date and Time This field displays the current date and time. 21
Page 1 and 2: Valid for: Operating manual CC 27.0
Page 3 and 4: Filling and air purging an external
Page 5 and 6: Quick guide for CC-thermostats Chec
Page 7 and 8: Chapter 1: Safety In this chapter i
Page 9 and 10: Intended Use and General Safety Ins
Page 11 and 12: Duties of responsible person The op
Page 13 and 14: To 1. Temperature control machines
Page 15 and 16: Operating conditions Please make su
Page 17 and 18: Chapter 2: Electronics and operatio
Page 19: Information Displays CC The followi
Page 23 and 24: Operation CC Please note, there are
Page 25 and 26: CC Operation using the simulated Nu
Page 27 and 28: Compact menu Control parameters: Th
Page 29 and 30: 2. With preliminary Test: To achiev
Page 31 and 32: Example: Indication when choosing L
Page 33 and 34: To create a new program, continue a
Page 35 and 36: Comfort menu Acoustic alarm Here yo
Page 37 and 38: Enter program A description on this
Page 39 and 40: Warning time level As low-level pro
Page 41 and 42: Time scale The time display can be
Page 43 and 44: Analogue Interface AIF INPUT FUNCTI
Page 45 and 46: Settings: 1. Settings on temperatur
Page 47 and 48: POCO alarm Pot. free Contact (POCO)
Page 49 and 50: Function Numbers and their meaning
Page 51 and 52: F30 Set date Setting the date. F31
Page 53 and 54: F90 Language / Sprache Selecting th
Page 55 and 56: User menu - config. Using this main
Page 57 and 58: Chapter 3: Connect the machine, fil
Page 59 and 60: Counter cooling (valid for CC Heati
Page 61 and 62: Switching on the temperature contro
Page 63 and 64: Setting the safety value: Select th
Page 65 and 66: Ending CC Temperature control The t
Page 67 and 68: Draining the machine and an externa
Page 69 and 70: Interface modules (RS232/SERIAL, Co
Page 71 and 72:
The following interfaces are availa
Page 73 and 74:
RS232 / RS485 Serial Socket A PC, P
Page 75 and 76:
Pin Designation 1 Level Test (Bridg
Page 77 and 78:
USB Device The operating mode of th
Page 79 and 80:
Firmware update: Updates and error
Page 81 and 82:
Messages Messages which occur can b
Page 83 and 84:
Alarm and Warning codes Hard Alarms
Page 85 and 86:
-143 -144 -148 -149 -150 -151 -152
Page 87 and 88:
Maintenance Danger! Prior to carrin
Page 89 and 90:
Chapter 6: Taking the machine out o
Page 91 and 92:
Transport The unit is now decommiss
show all

Operating manual 27.09.2011 CC Heating Thermostats - HUBER

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?