Operating manual 27.09.2011 CC Heating Thermostats - HUBER
Operating manual 27.09.2011 CC Heating Thermostats - HUBER
Operating manual 27.09.2011 CC Heating Thermostats - HUBER
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Description of individual Fields<br />
Field 1: Display Current value<br />
This field shows the current internal temperature of the unit and, if an external sensor is<br />
connected, the current process temperature.<br />
Field 2: Display set-point<br />
This field displays the current set-point.<br />
Field 3: Display Graphic temperature<br />
This field shows the internal and process temperatures in graphical format. The span of<br />
the temperature axis is between the minimum (see field 7) and maximum set-point<br />
limits (see also field 10).<br />
Field 4: Display Status Field<br />
This field shows useful information such as the current temperature control mode<br />
(internal or process), unit operations (degassing, air-purging) and active control loops.<br />
Field 5: Display Soft-keys operation<br />
This field enables various functions. Please therefore note the soft keys (63, 64, 65)<br />
located directly under the relevant touch screen buttons. The Function Number menu<br />
can be displayed by lightly touching the soft key 63 Funct.-no area of the screen.<br />
Please refer to the Function Numbers and Definitions chapter for more details.<br />
Pressing the soft key (64) Tset F(0) area of the screen will bring up the option to enter<br />
a new set-point. Pressing the soft key 65 Start of the screen will bring up the Start &<br />
Stop menu. This menu allows the temperature control, air-purging, circulation and<br />
degassing to be started as required. After an operation, the menu will return to the<br />
standard screen. Instead of the function Start in field 5 the function stop is now<br />
available. Pressing the soft key 65 Start of the screen will bring up the Start & Stop<br />
menu again. By pressing the Start area again, any operations previously started may be<br />
stopped.<br />
Field 6: Display Help<br />
Help (general information / trouble-shooting information) will be displayed.<br />
Field 7: Display minimum set-point<br />
This field displays the current minimum set-point limit (corresponds to Funct. no. F1).<br />
The minimum set-point also serves as the lower temperature limit for the graphic<br />
temperature display, in Field 3.<br />
Field 8: Pump and Level information<br />
This field displays the level as well as pump status including pump speed indication<br />
(only for temperature control devices with speed regulation).<br />
Field 9: Display maximum set-point<br />
This field displays the current maximum set-point limit (corresponds to Funct. no. F2).<br />
The minimum set-point also serves as the upper temperature limit for the graphic<br />
temperature display, in Field 3.<br />
20
Change language