Operating manual 27.09.2011 CC Heating Thermostats - HUBER
Operating manual 27.09.2011 CC Heating Thermostats - HUBER
Operating manual 27.09.2011 CC Heating Thermostats - HUBER
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Information Displays <strong>CC</strong><br />
The following information displays are available:<br />
1. Graphical display (60)<br />
The most important display, giving details of standard parameters (set-point, current<br />
temperature, set-point limits), as well as menu options and error messages.<br />
2. LED temperature display (66)<br />
The green LED display shows the current temperature.<br />
Please note that in internal control mode the internal temperature (outlet temperature /<br />
jacket temperature) will be shown, and with cascade control mode the process<br />
temperature (reactor temperature) will be shown.<br />
3. LED status display (68)<br />
Information on the actual operating status of the temperature control unit (e.g.<br />
circulation is active, cooling machine is active, heating is active, process control is<br />
active).<br />
Screen display (this display is reached by selecting Main Menu / Display modes /<br />
Graphic)<br />
Field 13<br />
Field 12<br />
Field 11<br />
Field 10<br />
Field 9<br />
Field 8<br />
Field 7<br />
Field 6<br />
22.04.08<br />
07:35.20<br />
OT<br />
80.00<br />
delta T<br />
100.0<br />
Tmax.<br />
150.0<br />
Tmin.<br />
-35.0<br />
?<br />
T process 20.00<br />
T internal 19.50<br />
T set-point 15.00<br />
Funct.-no. Tset-point(F0) start<br />
Please also note operating options described in chapter operation.<br />
Field 1<br />
Field 2<br />
Field 3<br />
Field 4<br />
Field 5<br />
19
Change language