Operating manual 27.09.2011 CC Heating Thermostats - HUBER

Description
CC Heating Thermostats are machines that ideally can be used for temperature control
tasks within an internal bath. The controller generation distinguishes itself by only using
one hardware. On payment of a licence fee, an activation key can be obtained, so that
the extended functions from a simple Basis Version to the Professional Version may be
made available quickly and at any time. Please contact our customer support team
(phone: +49 (0)781 9603244)
The high performance heating technology, gives a very short heating time.
With the integrated speed controlled pressure and suction pump circulation of the
thermal fluid can be exactly adapted for the required application.
With help of the self optimising cascade controller, you obtain the optimum control
results under steady state conditions as well as by set-point changes. One can choose
between aperiodic or with a small overswing (faster) control.
Information and temperature development can be easily read via the large graphic
display screen (with touch screen) as well as give command inputs.
A comfortable menu guidance eases the operation of the machine.
Dependent on your E-Grade Version, the following is available: analogue and digital
interfaces, programmer, and a Pt100 connection (according to NAMUR).
With the help of the digital interfaces RS232, RS485, the analogue 0/4-20mA or 0-10V
interface as well as various digital in and output possibilities (all according to the
NAMUR), the machine can be fitted without problem into many laboratory automation
systems.
The removable CC-Pilot can be used as a remote control.
External temperature control requirements can be easily met (requirement E-Grade
Exclusive or Professional) via the external Pt100 connection (NAMUR standard).
The integrated temperature-ramp function as well as the internal programmer underline
the high level of operator comfort. The integrated programmer offers the possibility of 3
different temperature programs each with 5 program steps (E-Grade Exclusive) or 10
different temperature programs with a maximum of 100 steps (E-Grade Professional),
which can be made and then called up.
The thermostat uses an over-temperature protection in accordance with DIN EN 61010-
2-010, which is independent of the actual control circuits.
10