MACH 130 FP Mains Voltage 230V / 120V - Dr. Mach

More documents

Recommendations

Info

MACH 130 FP Wall model 3.3. Mounting the lamp Dr. Mach Lamps and Engineering When mounting the lamp and also at one-yearly intervals, a light coat of acid-free grease should be applied to the mounting journal and the journal groove F of the lamp, or possibly the already existing cardan bow. Caution: The lamp may only be dismounted (in reverse order to the mounting procedure) after the mounting safeguard has been positioned and screwed tight, as the arm is under spring tension. Element D Safeguard bushing • Loosen locking screw K using a cross screwdriver. • Disengage spring element D from the safeguard bushing using a screwdriver (by pushing in direction of the outer edge) and slide back the safeguard bushing. • Take out the segment and remove helmet L. • Push the lamp and the cardan bow into the bore of the spring arm, so that journal groove F is visible in slot E. • Insert the segment and slide the safeguard bushing downwards again as far as possible. Insert locking screw K (including lock washer) and screw tight. Then REMOVE MOUNTING SAFEGUARD in the articulated arm. • Unscrew cylinder screw H. • Take out the red safety angle G. To do so, carefully move the articulated arm upwards or downwards. Caution: Hold the arm, to avoid bouncing up! The mounting safeguard (called G in all mounting instructions) and the corresponding cylinder screw H must be kept carefully for maintaining and dismounting the lamp. 59100002 Edition 07 05.06.2002 / Bak Page 6/25
MACH 130 FP Wall model 67,68 4. Operating the lamp Mach 130 FP Dr. Mach Lamps and Engineering Lamp features: • Mach 130 FP with focusable light field size and integrated dielectric filter disk. The reflector is adapted to the dielectric filter disk. The lamp-types mentioned above are available as: • Mach 130 FP; mains voltage 230V/120V; integrated toroid transformer 4.1 ON/OFF switch The switch 67 (with push button 68) switches the lamp on and off. For switching the lamp on and off push button 68. 59100002 Edition 07 05.06.2002 / Bak Page 7/25
Page 1 and 2: MACH 130 FP Wall model Directions f
Page 3 and 4: MACH 130 FP Wall model 1. Safety in
Page 5: MACH 130 FP Wall model 3. Mounting
Page 9 and 10: MACH 130 FP Wall model V 45 Cleanin
Page 11 and 12: MACH 130 FP Wall model 15 Alc. ≤
Page 13 and 14: MACH 130 FP Wall model screw driver
Page 15 and 16: MACH 130 FP Wall model 26,65 X X 6.
Page 17 and 18: MACH 130 FP Wall model 3 S X 2 S S
Page 19 and 20: MACH 130 FP Wall model 7.1 Technica
Page 21 and 22: MACH 130 FP Wall model 8.2 Specific
Page 23 and 24: MACH 130 FP Wall model 10.2 Wall at
Page 25: MACH 130 FP Wall model Spare parts

MACH 130 FP Mains Voltage 230V / 120V - Dr. Mach

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?