MACH 130 FP Mains Voltage 230V / 120V - Dr. Mach

More documents

Recommendations

Info

MACH 130 FP Wall model Bracket 2. Mounting layout Wall attachment Circlip Levelling washer (Remark!) Levelling washer Spring arm OT -lamp Dr. Mach Lamps and Engineering Remark: One levelling washer is always necessary. If the distance between wall bracket and spring arm is too big, use the second levelling washer. The circlip (Seegerring) must be easy to mount and has to snap in. It should turn easily in the groove. 59100002 Edition 07 05.06.2002 / Bak Page 4/25
MACH 130 FP Wall model 3. Mounting the spring arm and the lamp 3.1 Mounting the spring arm Dr. Mach Lamps and Engineering • Unscrew the cover 1 (with sliding contact plug) from the articulated arm. • Slide the articulated arm from below into the upper articulated arm. • Slide the levelling washer and safety ring onto the connection tube of the spring arm in the correct order. • Place the safety ring in position. Ensure that the safety ring slots properly in the groove of the coupling journal (tool: mounting pliers). • Place the cover back on the articulated arm and screw tight. 3.2 Removing the spring arm • Disconnect the electrical connection (in case of direct electrical connection using the fuses). • Unscrew the cover 1 (with sliding contact plug) from the articulated arm. • Pull the cover 1 off upwards by lateral compressing. • Remove the levelling washer and safety ring with the mounting pliers and pull the suspension tube out in a downwards movement. 59100002 Edition 07 05.06.2002 / Bak Page 5/25 1
Page 1 and 2: MACH 130 FP Wall model Directions f
Page 3: MACH 130 FP Wall model 1. Safety in
Page 7 and 8: MACH 130 FP Wall model 67,68 4. Ope
Page 9 and 10: MACH 130 FP Wall model V 45 Cleanin
Page 11 and 12: MACH 130 FP Wall model 15 Alc. ≤
Page 13 and 14: MACH 130 FP Wall model screw driver
Page 15 and 16: MACH 130 FP Wall model 26,65 X X 6.
Page 17 and 18: MACH 130 FP Wall model 3 S X 2 S S
Page 19 and 20: MACH 130 FP Wall model 7.1 Technica
Page 21 and 22: MACH 130 FP Wall model 8.2 Specific
Page 23 and 24: MACH 130 FP Wall model 10.2 Wall at
Page 25: MACH 130 FP Wall model Spare parts

MACH 130 FP Mains Voltage 230V / 120V - Dr. Mach

Create successful ePaper yourself

Delete template?

Save as template?