MACH 130 FP Mains Voltage 230V / 120V - Dr. Mach
MACH 130 FP Mains Voltage 230V / 120V - Dr. Mach
MACH 130 FP Mains Voltage 230V / 120V - Dr. Mach
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>MACH</strong> <strong>130</strong> <strong>FP</strong> Wall model<br />
68 AD<br />
BM 67<br />
6.3.3 Changing the ON/OFF switch<br />
<strong>Mach</strong> <strong>130</strong> <strong>FP</strong><br />
<strong>Dr</strong>. <strong>Mach</strong><br />
Lamps and Engineering<br />
You can turn the lamps <strong>Mach</strong> <strong>130</strong> <strong>FP</strong> on and off<br />
using the push button switch 67.<br />
To change the ON/OFF switch proceed as follows:<br />
• Turn off the lamp.<br />
• Loosen the push button 68.<br />
• Loosen the fixing nut BM and pull the ON/OFF<br />
switch out of the lamp housing.<br />
• Disconnect the cables from the ON/OFF switch.<br />
Mount the new ON/OFF switch:<br />
• Push the cables through and nick them.<br />
• Connect the cables to the ON/OFF switch.<br />
• Insert the ON/OFF switch in the cover AD. The<br />
lateral cover plates remain open.<br />
• Mount the ON/OFF switch including the cover<br />
AD in the lamp housing, so that the electromechanical<br />
component points to the lamp housing.<br />
• Fix the nut BM for approx. 2 thread lengths.<br />
• Push the lateral cover plates of the cover AD<br />
between the lamp housing and the ON/OFF<br />
switch.<br />
The switch must be completely covered (protection<br />
against electric shock).<br />
The cables are on the downside of the cover.<br />
• Fix the nut BM.<br />
Attention! Do not overturn the thread!<br />
• Mount the push button 68.<br />
• Push the button 68 to stop and fix the socket<br />
head cap screw.<br />
Check the function of the lamp.<br />
59100002 Edition 07 05.06.2002 / Bak Page 16/25