MACH 130 FP Mains Voltage 230V / 120V - Dr. Mach
MACH 130 FP Mains Voltage 230V / 120V - Dr. Mach
MACH 130 FP Mains Voltage 230V / 120V - Dr. Mach
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>MACH</strong> <strong>130</strong> <strong>FP</strong> Wall model<br />
26,65 X<br />
X<br />
6.3.2 Changing the fuses<br />
<strong>Mach</strong> <strong>130</strong> <strong>FP</strong> <strong>230V</strong>/<strong>120V</strong><br />
<strong>Dr</strong>. <strong>Mach</strong><br />
Lamps and Engineering<br />
The fuses in the lamp housing prevent the transformer<br />
burning through in the event of a short circuit.<br />
The fuses are situated beneath the housing cap.<br />
Visible type UR 5x20/1,25A/250V/ AC/t<br />
for <strong>230V</strong>/<strong>120V</strong><br />
If the bulb is no longer on, check the bulb first, then<br />
the fuses.<br />
Attention: At delivery the lamp is supplied with<br />
an additional fuse as spare part. It is mounted<br />
with a cable fixer to the focusing adjusting lever<br />
30 (see page 9).<br />
To change the fuses, proceed as follows:<br />
• Turn off the lamp.<br />
• Loosing the housing cap arrest by pushing the<br />
arrest pin X (e.g. with a ball pen).<br />
• Tilt up the cap and lift off from the facing arrest<br />
pin.<br />
• Turn the black fuse holder 26 ¼ of a rotation anticlockwise<br />
with a screwdriver, change fuse 65, insert<br />
fuse holder under slight pressure and rotate<br />
in a clockwise direction (bayonet catch).<br />
• Replace the cap 3 in the same way as taking off,<br />
so that the arrest pins click into position.<br />
59100002 Edition 07 05.06.2002 / Bak Page 15/25
Change language