ds lk v med[1]

LK V (medium bridge)
CNC TABLE MOUNTED BRIDGE CO-ORDINATE MEASURING MACHINE WITH INDEXABLE PROBE HEAD
Data Sheet
Performance Data
Model
Size
Repeatability
#
Volumetric
Accuracy #
Probing
Accuracy
Scanning
Accuracy
3D 3D
Velocity Acceleration
TP20 TP200 SP25 ~ SP25 ~ LC15 LC50 XC50 XC50-LS
ISO
10360-2
VDI/VDE
2617
ASME
B89.4.1
ISO
10360-2
ISO
10360-2
ISO
10360-2
ISO
10360-4
Metris
Test
Metris
Test
Metris
Test
Metris
Test
LK V x.y.z µm
MPE E
µm+L/mm
V2/V3
µm+L/mm
volume
µm
MPE P
µm
MPE P
µm
MPE P
µm
THP 1
µm
MPT T
seconds 1σ µm
1σ
µm
1σ
µm
1σ
µm
max
m/min
max
m/min 2
10.12.10 Standard Machine
15.12.10
20.12.10 •
1.9+L/375 1.9+L/375
1.9
25.12.10 (18-22 o C) (18-22 o C)
6.5 3.6 1.9 1.7 3.6 59 8 15 15 20 50 6700
30.12.10
35.12.10
Therma Option (Expanded Temperature Range)
40.12.10
45.12.10 2.4+L/300 2.4+L/300
2.2
50.12.10 (18-28 o C) (18-28 o C)
8.1 TBA 1.9 1.7 2.9 48 8 15 15 20 50 6700
Standard Machine
15.15.10
20.15.10
25.15.10 • 2.0+L/375 2.0+L/375
2.0
(18-22 o C) (18-22 o C)
30.15.10
6.7 3.7 2.0 1.8 3.9 59 8 15 15 20 49 6800
35.15.10
40.15.10 Therma Option (Expanded Temperature Range)
45.15.10
3.9+L/250 3.9+L/250
2.2
50.15.10 (18-28 o C) (18-28 o C)
11.7 TBA 2.2 2.0 3.1 48 8 15 15 20 49 6800
Standard Machine
20.15.12
25.15.12 •
2.1+L/375 2.1+L/375
30.15.12 2.1
(18-22 o C) (18-22 o C)
6.9 3.8 2.1 1.9 4.2 59 8 15 15 20 36 5300
35.15.12
40.15.12 Therma Option (Expanded Temperature Range)
45.15.12
4.25+L/250 4.25+L/250
50.15.12 2.2
(18-28 o C) (18-28 o C)
12.4 TBA 2.8 2.5 3.4 48 8 15 15 20 36 5300
20.15.15 Standard Machine
25.15.15 •
30.15.15 2.2
2.2+L/375 2.2+L/375
(18-22 o C) (18-22 o C)
7.1 3.9 2.2 2.0 4.6 59 8 15 15 20 37 4200
35.15.15
40.15.15 Therma Option (Expanded Temperature Range)
45.15.15
4.5+L/250 4.5+L/250
50.15.15 2.2
(18-28 o C) (18-28 o C)
13.0 TBA 3.1 2.8 3.7 48 8 15 15 20 37 4200
Key: • Preferred Product (optimum delivery) Standard Product (standard delivery) ─ Engineered Product
#
Applies to any probe assembly combination given below.
PH10MQ, TP20 or TP200, Ø2mm x 20mm stylus.
~
PH10MQ, SP25, Ø6mm x 50mm long stylus.
L Is the measured length bar in mm.
Page 1 of 3

LK V (medium bridge)
Weights and Dimensions
A
All dimensions subject to change without notification,
refer to the machine installation drawing.
1 Overall dimension excludes desk unit
(900x700mm) and controller cabinet (600x600mm).
2 Z axis traverse ends 57.5mm above the table when
measured from the end of the spindle.
3 For access height required during installation
consider Dimension GT + Dimension J + packaging
material (if not removed).
4 Concrete shear strength to be no less than
J
0.4N/mm 2 .
E
G GT
Z
X
Y
LK V-R
10.12.10 to 50.15.15
Model
Size
Overall
Dimension 1
Machine
Traverse 2
L X W Y H Z X Y Z
Machine
Weight
standard
machine
Table
Height
Table
Thickness 3
Component
Weight
Component
Clearance
Bridge
Height 3
Floor
Thickness 4
G GT max A E J min
LK V x.y.z mm mm mm mm mm mm Kg mm mm Kg mm mm mm mm
Standard Machine and Therma Option (Expanded Temperature Range)
10.12.10 2210 2045 3504 1016 1220 1016 2880 710 300 1352 1442 1116 1800 85
15.12.10 2718 2045 3504 1525 1220 1016 4188 710 350 1802 1442 1116 1800 115
20.12.10 3225 2045 3504 2032 1220 1016 5751 710 400 2252 1442 1116 1800 150
25.12.10 3735 2045 3504 2540 1220 1016 7580 710 450 2704 1442 1116 1800 170
30.12.10 4395 2045 3504 3048 1220 1016 9667 710 500 3156 1442 1116 1800 200
35.12.10 4901 2045 3504 3556 1220 1016 12002 710 550 3604 1442 1116 1800 220
40.12.10 5460 2045 3604 4064 1220 1016 14604 810 600 4056 1442 1116 1800 240
45.12.10 5958 2133 3654 4572 1220 1016 21067 860 650 5008 1442 1116 1800 250
50.12.10 6808 2133 3704 5080 1220 1016 24687 910 700 5730 1442 1116 1800 275
15.15.10 2718 2345 3504 1524 1524 1016 4829 710 350 2150 1742 1116 1800 155
20.15.10 3225 2345 3504 2032 1525 1016 6651 710 400 2673 1742 1116 1800 155
25.15.10 3735 2345 3504 2540 1525 1016 8782 710 450 3200 1742 1116 1800 200
30.15.10 4395 2345 3504 3048 1525 1016 11215 710 500 3727 1742 1116 1800 210
35.15.10 4901 2345 3504 3556 1525 1016 13938 710 550 4249 1742 1116 1800 250
40.15.10 5460 2345 3604 4064 1524 1016 16970 810 600 4775 1742 1116 1800 260
45.15.10 5958 2437 3654 4572 1524 1016 24338 860 650 6022 1742 1116 1800 275
50.15.10 6808 2437 3704 5080 1524 1016 28529 910 700 4523 1742 1116 1800 325
20.15.12 3225 2345 4017 2032 1524 1270 6696 710 400 2628 1742 1375 2050 155
25.15.12 3735 2345 4017 2540 1524 1270 8827 710 450 3155 1742 1375 2050 200
30.15.12 4395 2345 4017 3048 1524 1270 11260 710 500 3682 1742 1375 2050 210
35.15.12 4901 2345 4017 3556 1524 1270 13983 710 550 4204 1742 1375 2050 250
40.15.12 5460 2345 4117 4064 1524 1270 17015 810 600 4730 1742 1375 2050 260
45.15.12 5958 2437 4167 4572 1524 1270 24383 860 650 5977 1742 1375 2050 275
50.15.12 6808 2437 4217 5080 1524 1270 28574 910 700 4478 1742 1375 2050 275
20.15.15 3225 2345 4525 2032 1524 1524 6741 710 400 2628 1742 1629 2290 155
25.15.15 3735 2345 4525 2540 1524 1524 8872 710 450 3110 1742 1629 2290 200
30.15.15 4395 2345 4525 3048 1524 1524 11305 710 500 3637 1742 1629 2290 210
35.15.15 4901 2345 4525 3556 1524 1524 14028 710 550 4159 1742 1629 2290 250
40.15.15 5460 2345 4625 4064 1524 1524 17060 810 600 4685 1742 1629 2290 260
45.15.15 5958 2437 4675 4572 1524 1524 24428 860 650 5932 1742 1629 2290 275
50.15.15 6808 2437 4725 5080 1524 1524 28619 910 700 4433 1742 1629 2290 275
Page 2 of 3

LK V (medium bridge)
Technical Specification
Metrology Software
• CAMIO Studio including IGES CAD interface
Optional items *
• CAMIO Inspect non CAD metrology software
• Silver specification PC system and printer
• Gold specification PC system and printer
Probe System
• Motorised probe head PH10MQ
• Renishaw Ø19mm re-qualification sphere
Optional items *
• Standard touch trigger probe TP20
• High accuracy touch trigger probe TP200
• Touch trigger probe point-to-point scanning
• Continuous contact scanning probe SP25
Including Renishaw re-qualification sphere
• Non-contact laser scanning LC / XC
Including Metris scanner re-qualification sphere
• Fully automated stylus and probe changers
Metrology Frame
• X axis: granite table and guideway
• Y axis: ceramic beam and guideway
• Z axis: ceramic spindle and guideway
• Air bearings on all guideways
• DC servomotors on all axis
• Zero hysteresis friction drives on all axis
• Renishaw multi-wire installed
Probe head connector fitted when required
• Temperature compensation loom installed
Thermistors fitted when required
• 0.1µm Renishaw scales
• Machine table kick surrounds
• PC workstation desk unit
Controller
• CMM Controller MCC200
• Full CNC motion control
• Joystick hand box for manual operation
• High speed interpolated machine motion
including probe head moves on the fly
Optional items *
• Motorized indexing or rotary table support
• Remote Site Monitor for internet based fault
diagnostics and repair
• I++/DME client support
Environment
• Standard Machine (controlled environment)
Ambient temperature: 18-22 o C
Gradient per hour: 1ºC
Gradient per 8 hours: 2ºC
Gradient per meter: 1ºC
Humidity:
20-80% non condensing
Operating temperature: 18-28 o C
Optional items *
• Room size or close fitting machine enclosure
• Manual or automated pallet loading system
• Therma Option (uncontrolled environment)
Ambient temperature: 18-28 o C
Gradient per hour: 2ºC
Gradient per 24 hours: 5ºC
Gradient per meter: 1ºC
Humidity:
20-80% non condensing
Operating temperature: 18-28 o C
Anti-vibration
• Passive anti-vibration mounts
Optional items *
• Active anti-vibration mounts (AVM)
Required if floor level vibration exceeds 1.27um peak
to peak over 3.5-90Hz frequency range ** .
Air Supply
• Air pressure: 90 PSI
• Air consumption
Machine and AVM: 6 SCFM
Above with rotary table: 30SCFM
Power Supply
• 115V,20A,50-60hz single phase within +10% -5%
• 230V,13A,50-60hz single phase within +10% -5%
Warranty
• 12 months parts and labour warranty
• 10 year dimensional stability guarantee
Suggested Options Package
• High accuracy touch trigger probe TP200
• Silver specification PC system and printer
• Customer training by Metris or approved agent
• Machine installation by Metris or approved agent
* Item fully supported by the CMM Controller - additional hardware will be required. CE approved
** Refer to Metris Technical Standards UK556 and UK557 for data collection and analysis methods.
Metris HQ
Geldenaaksebaan 329
B-3001 Leuven
Belgium
tel. +32 16 74 01 01
fax +32 16 74 01 03
info@metris.com
Metris USA
tel. +1 810 2204360
sales_us@metris.com
Metris UK Ltd.
tel. +44 1332 811349
sales_uk@metris.com
Metris Belgium
tel. +32 16 74 01 01
sales_belgium@metris.com
Metris Germany
tel. +49 6023 91733-0
sales_germany@metris.com
Metris France
tel. +33 4 74 76 64 76
sales_france@metris.com
Metris Italy
tel. +39 11 9635511
sales_italy@metris.com
More offices and resellers at: www.metris.com
Metris China
tel. +86 10 5820 5246
sales_asia@metris.com
Metris Korea
tel. +82 31 399 5951
sales_korea@metris.com
Metris Japan
tel. +81 52 709 3877
sales_japan@metris.com
Metris India
tel. +91 11 2275 32 44
sales_india@metris.com
DS LK V (medium bridge) Rev:0805
Page 3 of 3