Surface Mounted Type Fire Hose Cabinet with Equipment ...

Surface Mounted Type
Fire Hose Cabinet with
Equipment Compartment
NORMEKS ® S22-R2T model is a surface
mounted type cabinet with three
compartments having vertical divisions for
two portable extinguishers. Reel has been
fastened on a 180° hanged support and
installed on the right side of the cabinet.
Valve-hose connection of this model complies
with DIN 14461 standard. This model
has been designed by considering especially
SNIP standard.
Model S22-R2T has the following characteristics.
Water is supplied from the center of the reel.
The hose reel-holder is painted with 70 micron
RAL 3001 red electrostatic powder paint.
Fire hose cabinet is painted with 70 micron RAL
9002 grey white or RAL 3001 red paint.
Closing nozzle complies with the NORMEKS
jet / spray / pr.EN671-1 standard
Semi flexible rubber hose complies with
pr.EN694 Standard.
2" angle valve and special valve assembly
reducer (reducer with 2"-1" storz coupling ).
Rustproof brass reel hub with 3 positions.
Cabinet enclosure made up of 1.5 mm DKP
sheet metal and double folded cabinet door.
Cabinet door is right hinged (left hinged is
available on demand.)
Rear installation plate of the cabinet is produced
from 1.2 mm DKP sheet metal.
Has two water inlets with the diameter of 75
mm. NORMEKS door lock, made-up of double
color ABS.
With the rear installation plate supplied as
demounted, cabinet can be installed after the
completion of the construction works such as
plaster, painting, etc.
Sign plate is available on the outer door of the
cabinet according to Directive 92/58/EEC.
Reel can rotate 180°. Thus, hose can be
extended in any direction.
User and installation manual.
Portable extinguisher has been used as accessory in the illustration.

Surface Mounted Type
Fire Hose Cabinet with
Equipment Compartment
Service and maintenance of the fire hose cabinets should be performed
according to service and maintenance standard pr. EN 671-3 and
NORMEKS maintenance instructions. Please contact with NORMEKS
for a service and maintenance contract.
Diameter
(mm)
Hose
Length
(m)
Dimension
Order No
•Our products comply with TS. EN 671-1.
• Manufacturer company reserves to make changes in production
standards and materials without prior notice.
• Our standard production has sheet metal door; transparent
door (plexiglass, reinforced glass) orders should be indicated
separately.
• Water inlets are at the right side in our standard manufacturing.
Top left and bottom left demands should be indicated separately.
Our standard production color is RAL 3001
and please indicate your RAL 9002 demands separatelyir.
© Normeks Yangýn Armatürleri Sanayi ve Ticaret A.Þ. All Rights Reserved.
Mayýs 2011 NR-030.Rev-00
Eyüp Sultan Mah. Ulubatlý Hasan Cad. Baþkent Sok. No: 6 34885 Samandýra - Sancaktepe / ÝSTANBUL Tel: +90 216 311 40 41 pbx Fax: +90 216 311 90 91
www.normteknik.com.tr