THE JUMPGATE DEFINITIVE GUIDE - Tripod

PCM-WE2
Size: 1
Mass: 1400
4% reduction (per shot) to
weapon power
consumption.
PCM-WE3
Size: 1
Mass: 1650
6% reduction (per shot) to
weapon power
consumption.
AE - All Efficiency
PCM-AE1
PCM-AE2
Size: 1
Mass: 1090
3% increase in efficiency
of engines, shield and
capacitor.
Size: 1
Mass: 1370
4.5% increase in efficiency
of engines, shield and
capacitor.
CS - Capacitor Storage
PCM-CS1
Size: 1
Mass: 720
3.5% increase to total
capacitor energy storage.
"Substantially the same as PCM-WE1, this model
adds the common pre-collapse phase correction
technology to further decrease weapon power for
a total reduction of 4% per shot."
"A modx that incorporates a feed-back amplifier
as well as pulse shaping circuitry in order to meet
the precise energy needs of a given weapon,
reducing capacitor drain by 6% per shot."
"Similar in function to PCM-AB devices, this
device focuses on increasing the efficiency of
engines, shields and capacitors by 3% by
delivering power to each system only in the
frequency range best used by that system."
"This device appears to improve upon the PCM-
AE1 by capturing reflections in the transmission
lines and converting them to useable power. The
total result is a 4.5% improvement in efficiency of
engines, shields and capacitors."
"This pre-collapse device allows energy that is
normally considered lost to parasitic capacitances
(in conductors, couplers, etc) to be captured and
used for weapons, thus increasing the total energy
stored by the capacitor system by 3.5%."
171